BEST WAY TO MOUNT A RED DOT! No more cutting your slide! MOS NOT NEEDED!!

[@NNKretired]

Learn something new everyday. I'll be doing some more research on these.

[@jeffofalltrades8489]

I have another video on this showing the true strength and reliability of these. Check out my channel for the full torture test

[@aquagoatnews2760]

Here's all you need to know: they break during install and are junk

[@DisclosureTvNews]

I figured out how to set these plates up a while back. The light shining thru is fine. However if you notice, the gap is smaller at the front than the back. Basically your plate is sitting at an angle. I guess thats fine. But i like my stuff level. This is my way of doing it. To install ANY of these dove tail plates correctly. 1). You must know that the front screws are also to be used as set screws. Which adjust the front of the plate up/down. 2) Insert the plate as normal. 3). (Using blue loktite)screw in the dove tail set screw but do not tighten with pressure.4) while looking at the gap with a light (blue loktite)Screw in front set screw(s) until the gap from front to back is equal. 5). slightly Tighten down the dove tail set screw. then while checking alignment and gap slightly tighten down the front set screws. The loktite and optic should keep the front set screws from moving any direction.

[@dionvillanueva8822]

Thanks Brother for putting this video out. Had no idea about Dove mounts...lol I was looking at picking up a new pistol that comes with optics ready...you saved me some cash👍

[@jeffofalltrades8489]

Glad I could help, my friend!

[@gregbobbie7521]

Thank You Most excellent tutorial. Will try out your techniques and products

[@jeffofalltrades8489]

@@gregbobbie7521 thank you for the support my friend!

[@va.6819]

Today I learn a lot with you. Thanks for your patience teaching others. That will help others safe a lot of money milling or buy new sliders

[@jeffofalltrades8489]

Glad you like it! Thanks for the support!

[@bshawwarren1]

Great video, I've spent hundreds of dollars having slides milled. This makes a huge difference. Wow!!

[@jeffofalltrades8489]

I'm glad you like it!!!

[@davva360]

You can tell how much more popular red dots are becoming. I have a G19, it was a non MOS version, but I bought a MOS slide later on and use that slide on that gun now. I got the complete slide, striker and everything for about $150. Have a Holosun installed on it. Works great. I have tried looking for a G43X MOS Slide and people want $500 for one. I can get an entire gun for that price LOL. And that is probably what I will end up doing. Probably see if my local shop will give me a decent amount for my old G43X and if not just keep both of them. Would need night sights again though. Not a cheap hobby.

[@jeffofalltrades8489]

You should look into the Shield sight. I just made a stress test video on it and it impressed the hell out of me! Dovemounts sells that sight too so if you used my code you'd also get 10% off of that, if thats what you're looking for!!

[@Dressed2KillTaye]

Get a precut slide...

[@reddolf2489]

where did you buy your precut slide at?

[@davva360]

@@reddolf2489 Bought it on Gunbroker but it was a few years back now. Like i said i am not seeing them at that price anymore. People want so much for them now you may as well buy another gun.

[@dreday6320]

😂😂😂😂 that's exactly what I said. I could just buy another gun at that price lol

[@OldCowboy450]

I was about to mill out my S&W Shield glad I found this vid. Thank You.

[@jeffofalltrades8489]

That's great!

[@michaelgnafakis430]

Thanks for the video. Perfect timing. Just stumbled across this video while researching optics for my Glock.

[@jeffofalltrades8489]

Thank you for the support!

[@polarisflyer]

Brilliant!!!! Now, I wish they had a mount for my wife's Walther P22.

[@exgenica]

At least 20 years ago or so, I designed and made an effective optics adapter that attached to the pistol via the 2 screws that held one of the scales on the grip (the pistol involved had no rails on which to affix any sight or light). The adapter was a kind of twisted "L" shape. That mounting method also reduces to a major degree the shock impulse put on the optics as the optics don't move with the slide. If desired, it can allow for co-witnessing as well by just optionally lengthening the adapter a bit to locate the optics mounting rail leaving an air gap of about 5mm above the slide. The downside of course, was that the part of the adapter that attaches to the pistol has to be custom designed to fit in place of the scale it replaced. The alternative design just provided a "universal" mounting extension that instead sat on top of the existing scale (still using the scale's mounting screw points but slightly longer screws), which increased the width of the overall grip by about 2mm which could be an issue with some pistols and people with smaller hands...and it felt "rougher" to the hand. But the mounting extension could be pre-drilled to accomodate several common pistol scale mounting screw layouts for different pistols. I preferred my custom adapter that replaced the right-hand scale on that particular pistol. One also had to ensure the ejection port wasn't affected. It also wasn't ambidextrous...it would have had to have 2 models: one for left hand and one for right hand pistols/mounting. edit to add: probably wouldn't be feasible on a modern plastic frame pistol as any screw holes tapped for the optics adapter into the frame would likely deform with use and time, and could negatively affect the mechanical functionality of the frame.

[@godsforces1776]

Wow .. excellent idea , thank you 👏 So , I don't need to retire my 26 year old former service G19 Gen3 🇺🇸💙🇺🇸

[@stebbinsgr1]

Jeff it is not really necessary to take the gun to the range to confirm sight alignment. Get a 9mm laser boresight cartridge such as those made by Sightmark. You can verify the alignment by measuring off 10 yards and verify that the laser "red dot" is on top of your front sight or slightly covered by the front sight. I use this method to initially align Crimson Trace laser sights for 10 yards.

[@jeffofalltrades8489]

Yeah but why not shoot if you can shoot??

[@stebbinsgr1]

@@jeffofalltrades8489 I rarely take someone else's gun to the range. If it is mine, then I would go shoot.

[@DZheng808]

thank you!!!! ill do this

[@alecubudulecu]

this will get you "close" but you do need to zero it ultimately

[@jeffofalltrades8489]

@@alecubudulecu yes!!!!!

[@98-24]

Dude, That was pretty slick!!!

[@jeffofalltrades8489]

@98-24 thanks for the support!

[@bachmanmwb]

Love the optic solution sans milling! Thank you!

[@jeffofalltrades8489]

That's great! Thank you for the kind words!! Happy shooting my friend :)

[@jeepthang72]

Great video brother! One suggestion, investment sight pusher. You will find it to be invaluable and you can get a decent one for like 45 bucks. You can actually get a really good one for around 45 bucks. Just throwing it out there brother keep up the good work!

[@jeffofalltrades8489]

Thanks for the idea and support

[@dovemounts8840]

We don't recommend using a sight pusher with our design, as it can damage the threaded posts where the optic attaches if done incorrectly.

[@reesethadon1050]

@@dovemounts8840 Does this mount to canik?

[@dovemounts8840]

@@reesethadon1050 we don’t have a mount for Canik yet, but possibly soon.

[@jcb86-a]

I was excited to see this until I went to the website and found a very limited variety of guns the dove dot is compatible with. Sure would love this for a FN FiveSeveN MKI.

[@scottswan3722]

Would have liked to see one for my Sig 320

[@leesg3]

Thanks for the information. Ive had a different mount on my 43 but wasn't happy with it. I went to the Dove sight and entered your code and its on its way! Thanks again.

[@Ricky-ix5yt]

There are a few videos on the net regarding the Dove Dot mount, but by far your video is the best - very casual, yet professional and very informative with a step by step tutorial. Thank you Dovemounts for an excellent product, and thank you Jeff for an excellent tutorial. Unfortunately I'm from South Africa and with our poor rand to dollar exchange (R18.8049 to 1$) I cannot afford to purchase the dove dot mount currently. Will have to save up and purchase in the near future. Hopefully the night site version will be out by then.

[@jeffofalltrades8489]

The night sight is out now!!! I am planning on making a small video on it, but its fantastic! If you like the Dove mount .... I just finished edited a video STRESSING THIS MOUNT as far as I could ... make sure you're subscribed to see it, you wont want to miss it! Thank you very much for the support!!

[@RedPill556]

Perfect for my OG Gen1 GLOCK 17.

[@grubbysackenhaus4109]

Love the idea of the Dovetail/Novak Dot - just wish they made one for other footprints.

[@vashmatrix5769]

I fall into the, too broke to get mine cut group. That cowitness is great.

[@jeffofalltrades8489]

@@vashmatrix5769 that's why I love this thing! Great in all applications

[@shotseverlasting772]

Bro. I found ur other vid legit 10 min ago and you posted this 13 min ago😂

[@jeffofalltrades8489]

Well how about that for timing lol I'm glad you found this one!!! Big improvements here!

[@freeandcriticalthinker4431]

@@jeffofalltrades8489 dude do you not get what he is talking about? You vastly improved your gun in 3 mins? Or just recorded two videos back to back and uploaded them

[@jeffofalltrades8489]

@@freeandcriticalthinker4431 those two videos are recorded years apart ....

[@NorthwestGuitarworks]

@@freeandcriticalthinker4431reread the first comment you’re misunderstanding

[@zombielover317able]

Damn random comment guy you can take his testicles were right out of your mouth and stop brown-nosing are you trying to get a date or something what the hell are we doing here 😂😂😂😂😂

[@samuelneil2691]

Wow, total game changer. I was just thinking about how I got a PSA dagger that comes with RMR cut. I love that pistol because of the red dot. I am not wanting a red dot on my P365 edc but was worried about losing my ass on trading in for an optics cut version. Thia seems like a great way to swap the sights without gun smithing fee. And you can change back to OEM sights if you ever sell. Whereas milling the slide could ruin trade in value. Not that i sell any of my guns lol...

[@JdmSana]

Thank you Jeff for this amazing video! Definitely worth trying out instead of milling the slide. I decided to put an order in and used your coupon code, thanks. 😁

[@jeffofalltrades8489]

Awesome man let me know how you like it! Thanks so much for the support!

[@davidpignatore6532]

Did you get the kit? How is it?

[@JdmSana]

@@davidpignatore6532Sorry for a late reply. Yes I did get the kit, and it was well packaged and fit on my firearm perfectly with my red dot. Definitely recommend to anyone who doesn’t want to mill there slide.

[@JdmSana]

⁠@@jeffofalltrades8489I love the mounting plate! 😁 I’ve owned it about 3-4 months now and it’s amazing! Shot 1,000 rds with my firearm at the range and it’s never moved out of place or anything, stays intact with no issues. I love it! 😁

[@davidpignatore6532]

@@JdmSana all good brotha. Thanks for the reply

[@aaronray768]

Just installed a dove dot on my Arex Zero 2s absolutely love it best thing ever 😊

[@toamaiusdvignir9468]

This is awesome, very very good option vs milling your slide. Just make sure you test for reliability as the added weight may affect some of your lighter defensive loads. I will be considering this for my G19 :).

[@jeffofalltrades8489]

It has been tested and put through some high test. I have not tested lighter loads though! With how small this attachment is though, I would be surprised if it effected anything

[@Balenciaga_Baby]

I actually contacted dove asking that question. They said they’ve actually ran the dove mount shooting .22 with little issue. I was asking if I’d have functionality issues running this on my Glock 42 (380) and they said “definitely not” and added even shooting 85gr had no issues with functionality. Hope that answers your question and anyone else that might have the same question.

[@dovemounts8840]

You wont see any decrease in performance due to added weight. Definitely not with defensive loads, and definitely not until you start getting into .22lr territory.

[@calid.]

@@jeffofalltrades8489i wish you would have shown what it looks like now when you look into the optic

[@scottishvikingmafioso]

good to learn that taking your gun to a gunsmith for this is not an absolute. Because I had planned on going that route and being charged $100.00

[@teaganwindago3132]

I needed a mounting system and a lot of better red dots. I wasn't looking for them. I needed the lights first. I'm not sure how you popped up on my suggestions page but I'm glad I found you. I hope they have the plates for my pistols. I'll find out soon enough. You make very good videos. Good luck on growing your channel.

[@jeffofalltrades8489]

Thank you for the kind words and support!

[@ayanami351]

1/8 of an inch off a 4 inch barrel pulls your shot 2 and 1/2 inch off center at 10 ft and 1/16 puts it at 1 inch and 1/4. I hope to God that the outside company's keeping it closer to 1/64 if not better even that moves your shot 1 inch at 32 ft more or less 10 yards. This is a good video and I believe in putting your life in your hands and not someone who sees you as a number.

[@phillyblazen1736]

Man! This is awesome. I watched your 1st vid on the other plate and I thought that was so cool, but this product is waaay better👏🏽👏🏽👏🏽

[@jeffofalltrades8489]

Good I'm glad to hear it! Thanks for the support!

[@lempira69]

Great video, you make look so easy I want to get the red dot on my G43 and my M&P

[@RodGriff]

Any updates on holding zero after a few hundred rounds down range? Also durability with rough use?

[@dovemounts8840]

Torture test coming soon!

[@jeffofalltrades8489]

500 rounds done so far .... still holding 0. I also "Accidentally " hit it with a hammer .... still going strong! Stay tuned for the full torture test!!!

[@georgegonzales2823]

Thank you bro!!🍻🥳

[@jeffofalltrades8489]

@@georgegonzales2823 any time! Glad you enjoyed

[@georgegonzales2823]

@@jeffofalltrades8489 I’m trying to find it. Amazon just has a whole bunch of garbage.

[@DrDiff952]

When you buy a slide, buy a slide that is precut for your optic!

[@dovemounts8840]

Unless that option isn't available. Several other models other than Glock!

[@jeffofalltrades8489]

What if you got a gun from someone that doesn't have a cut slide?

[@nolagospeltracts8264]

Very clean presentation. Music at just the right volume.

[@markcopenhaver5256]

Thank you for posting this video. This is a great alternative to buying an aftermarket milled slide for an optic.

[@sergiouvalli7122]

will this work on my g3 taurus

[@franksmith8210]

A milled Glock 19 slide is $100... Just buy the damn thing.

[@richardburgos4230]

WAIT WHAT!! this is awesome!!

[@russellhorn7437]

One thing to add. removing the old front and rear sights can and will be veery difficult without a sight adjustment tool. Those sights are wedged in very tight.

[@jeffofalltrades8489]

Not true. The only rear dove sight that is almost IMPOSSIBLE to remove is the Smith and Wesson (not all models). Glock can be done with a screw driver and a soft mallet if needed. A punch and a slide wedge works great too! I wouldn't recommend a sight pusher Front sight is as easy as getting a $2.00 tool from Amazon (Front sight removal tool)

[@no_handle_required]

For the range maybe, not for relying on for your life.

[@jeffofalltrades8489]

Why not? Can you give me 1 reason?

[@BaileyChavez-p1i]

Because this takes the head ache out of gun ownership and if it’s not a pain in the ass or slightly disappointing I’ll have no minor reason to trade a perfectly good gun for a new gun that does the same thing the old one did this just makes way too much sense I hate it lolol…ordered 3

[@jeffofalltrades8489]

@@BaileyChavez-p1i you said it better than I could have brother.

[@BigJimDeeDaDee]

Id think the purchase a dovetail would have would be much tighter than short, tiny screws.

[@shadoww914]

Figures the Internet Masters Degree holder here doesn't back up his claim. Typical day on YT, nothing to see here except a pin of shame.

[@markamiller1970]

I really appreciate you taking the time to show me how you cleared the pistols before working on them. Safety first!!!

[@JettBlast]

They are working on a Night Sight version...Looking forward to it!

[@Ricky-ix5yt]

Great product. I see on their web site they now offer tritium front sights. Just a thought - would it be possible to manufacture a mini or micro tritium vial to be inserted into the rear sight with the current design. If the sight had to be thicker to cater for a vial, the plate may have to be longer and may not be ideal for stability as only the dove tail secures it to the slide and maybe prone to mild vibration thereafter. It is opinionated but I think tritium is currently the best in night sights. Well, since they made such a great product first time round, I'm sure they will do well with the night site version. Just by the way, I am from South Africa and love the product. With our rand to dollar exchange (R18.8049 to 1$) which is expensive for us in South Africa. On my wish list though.

[@joseelgallovelasquez7932]

Very useful video!!! I was a little concern because a lot of people telling me - oh you should buy the optic ready version you are screw now- but this dove mount is awesome!!

[@jeffofalltrades8489]

This was made for people like you! Or people that bought a gun years ago, and now want to add a red dot!! I did a full torture test on this thing, and it didn't budge! It's amazing. Check it out! It's on my channel

[@chi-townmuscle]

I just found your site and I’m glad I did. I purchased two of the Dove products. Thank you so much. Your discount code was great 👍🏽

[@jeffofalltrades8489]

That's good to hear!! Thanks very much for the support, it means a lot! Let me know how you like them

[@kingjeffishere]

Normally it's hard to sit through some vids, but, this was worth the Subscribe. Definitely a option I'll have to give a try.

[@jeffofalltrades8489]

I appreciate the kind words! Thank you my friend!

[@donnadesimone1164]

Thank you, Jeff. I love my Glock 43 and now will love it more now that I can put this mount on and get a Red Dot. Great Video!!

[@jeffofalltrades8489]

I'm glad you like it!! Check out the torture test video I did on this thing. Its wild ... if you plan on throwing your gun into the ground, rest assured it will hold zero!

[@keithduffield5239]

Nice - I would use the tiniest drop of SuperGlue to fasten the optic fibre sight

[@jeffofalltrades8489]

@@keithduffield5239 not needed! It's melted plastic, it doesn't move at all

[@steveoTHEGREAT]

I had the dpp plate and i absolutely hated it. Always was maxing out my dot like you said. I LITERALLY SENT MY SLIDE TO GET MILLED A COUNTRY DAYS AGO. If I saw this I would have tried it. Damn it lol

[@jeffofalltrades8489]

I wish you would have!! That DPP plate was .... OK at best ... but you get what you pay for! I'm glad you got your slide milled though, at least you can shoot now! Lol

[@clee6746]

Thinner mounting plate also means it is easier to find the dot.

[@jeffofalltrades8489]

You got it!

[@MrCcrespo88]

I was on the fence with dovetail. Sae this video of the simplicity of it, and I thank you.

[@jeffofalltrades8489]

I'm glad I could help!

[@ThatGuy-zt6po]

I felt ridiculous after putting in the work on the DPP install. I still prefer milling it though

[@andrewadams5905]

Awesome having front sight Infront of the dot to. Doesn't block the dot. Becoming a lot more popular. Even milling front site doves Infront of the dots now. This is cool

[@jeffofalltrades8489]

I love it man, it really is the best of all worlds

[@Ape76]

$100 for just a plate😂😂😂😂Looks like cutting the slide is same money if not cheaper 😊

[@lens7859]

Wish I knew about this before I bought another slide for my Glock 19

[@jeffofalltrades8489]

That gets expensive! I love this option because it's reversible and affordable! Even if you don't need the plate, the offer a few other great products that might be right up your alley! I'll be making a video on the red dots soon !!!

[@tateharriman8125]

You can always use this on the slide that isn't milled!

[@WanderingBobAK]

@@tateharriman8125 Yeah, that's the point, I think.

[@MyDudeEd]

Searching for something else, this video popped up on my feed and I just ordered 2 of them for my Glocks because of you, lol. Just like you mentioned, I don’t really trust sending my stuff away. Thanks for the video.

[@jeffofalltrades8489]

I'm happy to hear that! I did a full torture test on these things too and it performed great! You should check out that video. It was really fun to make lol

[@MyDudeEd]

@@jeffofalltrades8489 just watched that torture video and was like this guy is nuts! None the less, you got my subscription. Thank you again for the video. I know now that I’ve made a good investment.

[@lukewomack6932]

This was worth the wait like you said on the last video. Thank you again!

[@jeffofalltrades8489]

Not a problem! If you haven't purchased yet, make sure you use the code! 10% off !!

[@jrb9957]

this is great! i am so glad i stumbled upon your channel. I'm going to do this to couple of my glocks and my shield. you sir, have earned a subscriber.

[@pellcio]

Great clear instructions. Thank you.

[@jeffofalltrades8489]

@@pellcio so glad I could help!! Thank you for the support

[@cameronmartin4159]

Placed my order immediately after watching your video and used your code! Thanks Jeff!

[@thomasl2193]

What code, didn't see any

[@cameronmartin4159]

@@thomasl2193he talks about his code in the video. Code is Jeff10 I believe

[@Whuzzer]

Just ordered one for my gen 3 g19. 66 left in stock and coupon code still works

[@jeffofalltrades8489]

It always will!! Amazing product, I wanna get you deals too!! I have 5% off that Shield sight optic too if you're interested ;)

[@martinmaddox5315]

This product is thinner and still has a gap. My common sense makes me think it is structurally not as strong. Wouldn’t it be better if there was zero gap? Maybe the gap issue could be solved by tailoring the dove dot adapter to each manufacturer rather than one size fits most. Also this adapter is more than twice the cost. I’m pretty sure the gap can be eliminated. Once you do a review with zero gap, I’m going to buy one. Thanks for the excellent review. I’m subscribing hoping to see a new review when the gap is eliminated.

[@DonaldSanders-hb2qg]

FANTASTIC!!

[@jsl5570]

After watching your video I ordered one and used your discount code. I just received it today and will install it tomorrow. The quality looks good. I'll test it out next weekend.

[@WanderingBobAK]

and?

[@VABLM757]

How it turn out ?

[@Santaheckler]

Really is genius simplicity at its best! Sold!

[@jeffofalltrades8489]

Back in stock!!!

[@MrMmp1234]

Nice video. It’s ok about showing if the weapon is clear. You know what you’re doing, plus my iPad won’t let a stray bullet come through.

[@WanderingBobAK]

Bahaha! It always made me laugh when people clear their guns. I do feel safer and no longer have to duck to avoid NDs

[@ericdincauze3984]

This is not better than mounting a red dot sight into a purpose milled slide. The cut slide is much stronger mounting, sits lower and does allow co-witness of the sights.

[@MrPerry61]

I have the Holosun SCS MOS monted on my G45 MOS, no plate, direct fit. green multi reticle. No Battery to replace. I have the SCS P320 mounted on my Sig P320 Carry.

[@martinmaddox5315]

I assume it’s solar. Is it bright enough even on cloudy days? Thanks.

[@thetnpickers]

hi jeff!! Im about to join you in promoting Dove mounts and im so excited! Thanks for the great video! I went ahead and subbed to keep up with you, Im a fairly new guntuber its nice to meet you!

[@Alltracavenger]

Great, informative video. I'll admit that I'm not personally sold on the idea of pistol optics and I greatly prefer irons(I have shot a few with dots), but this looks like a great one to get if I want to try it at some point without having my slides cut or buying an MOS Glock. I'll absolutely keep the Dove system in mind if I want to give it a go sometime.

[@jeffofalltrades8489]

That's the great part of this product IMO...it's reversible! It really is nice to put a red dot on any gun, and if you want to go back to Iron Sights, it's easy to do

[@millo7295]

In my opinion: The sidearm is supposed to be a lower fire rate but more accurate The larger gun is supposed to be for free fire, no care in the world But you'll just say that's an opinion

[@stevelatham3010]

Great video! Very helpfull ! Thank you Jeff!

[@bandjolyn]

Awesome, thank you so much! Just installed on my s&w 2.0.

[@jeffofalltrades8489]

Awesome!!! I love that gun

[@davidknights2535]

How is it going since installation?

[@jeffofalltrades8489]

@@davidknights2535 you should really check out the torture test video I made on this mount....this thing doesn't move...

[@Ist_Geheim]

I'd like something like that for an Aimpoint Acro. A dovetail adapter plate with co-witness iron sights.

[@mr.c5647]

Hey Jeff love your channel and content, can you please tell me where you got that grip with that texture, I’m a huge Glock fan my only gripe is the texture. Thank you again.

[@jeffofalltrades8489]

@mr.c5647 sure! It's called Tallon Grips. Very affordable and a great assist with grip!

[@lle60626]

Best video I've seen on red dots, great job

[@jeffofalltrades8489]

Glad you liked my friend! Happy shooting!

[@johnbicknell8512]

Good info Sir . If l ever do that type of sight I will do what you did .

[@kentuckyjustice1408]

Good concept. Maybe I'm a cheapskate, but I thought $85 (less your discount, + shipping) was a bit high. I'll probably still order one though.

[@trantor5656]

Thank you.

[@jeffofalltrades8489]

@trantor5656 thank you for the support!!! :)

[@vudoodaddie]

Thanks.

[@jeffofalltrades8489]

@@vudoodaddie yup.

[@TOMERYAHAV]

Jeff good day. Brilliant video. Do you have recommendations for Glock 43x appendix carry holster that will go with the dove mount pared with a Holosun product… Thanks in advance

[@JH-pk6em]

Would be great if they were actually in stock!

[@jeffofalltrades8489]

Back in stock!!! 🎉🎉

[@kas-5591]

Looks great! I have been looking to mount one to my Glock 19.

[@jeffofalltrades8489]

You should!

[@brucecarter6196]

Great video, you are clear and concise. I love the product and would like to have some but they are out of stock and out of stock or on backorder. I know how business works so I'm not really mad, but I do hate when I finally find a great product and can't get it. I'm new to your videos and I'll be watching more.

[@jeffofalltrades8489]

These are great, and people have taken notice. It's a great thing for business! But unfortunately they are out of stock. I can say they restock quickly and always make it known when they have them back!! I recommend adding their Instagram and they usllay update people there

[@steveb1409]

Excellent product and excellent representation and excellent instruction and walk through video excellent job bro.

[@jeffofalltrades8489]

I really appreciate that feedback Steve! Thanks very much for the kind words. Happy shooting!

[@bobbyledford1957]

GREAT VIDEO! THANK YOU! The music is awesome. Remimds me of Khruangbin

[@_Delta_P_]

Those mounts are so so so tall

[@awsomedude9111]

cool idea, but I really want different plates like an RMR so this wouldn't work for me yet. possibly there could be problems but swapping optics would be cool

[@badkatrising3918]

Nice review. No fluff.

[@yousefsafa5248]

Great product. Thanks for sharing.

[@jeffofalltrades8489]

Thanks for the support!

[@David-sy1jl]

Extremely well done ❗️

[@jeffofalltrades8489]

Thank you for the support!

[@tripplebeards3427]

I was excited till I saw the fiber optic front site. I have broken many of those out. They are not durable to say the least. Just a plain old plate with no built-in rear site would be nice and then I could install my own sites.

[@jeffofalltrades8489]

Or upgrade and get the tritium night Sights!

[@lens7859]

Great demo ! looks like a nice system for one of my guns , thanks

[@jeffofalltrades8489]

Thank you for the support man! It means the world to me

[@cjsierra4498]

@@jeffofalltrades8489 hey Jeff what’s up!.. great review btw, I’m wanting to get the dove dot as well but I don’t like the fiber optic sights, I was wondering if you could measure the height of the front sight?? Or if you know would a night fision front sight co-witness with the dove dot plate as well?… I just don’t like the look of fiber front sights and would rather purchase a regular front sight that works with the dove dot… thank you!

[@jeffofalltrades8489]

@CJ Sierra .365" on Glock, Night Fision suppressor height irons will work fantastic. Thanks for the support!

[@cjsierra4498]

Thanks for the reply!

[@cabbys]

Excellent video. Clearly explained, filmed and edited. Used your code to get 10% off. Thank you!

[@jeffofalltrades8489]

Thanks for the support!

[@Ali-ym8ny]

I like to have one for my G31!

[@FLYBOY123456789]

outdamnstanding Jeff...getting one today...thank you...

[@jeffofalltrades8489]

Thank you for the kind words!

[@jeremyolson2596]

Man this is awesome now I can stick with my Gen 2 Glock! Thanks, I just stumbled onto your channel but you just gained a new sub also.

[@jeffofalltrades8489]

I appreciate it my friend!! Let me know how it works out for you!!

[@jogger19x]

theres another company I'd have to search to remember the name that slides into your rear sight just like that but also comes with a metal backplate that the mount hangs over the back & screws down into the backplate

[@pennywisetheclown2516]

Thankfully Glock is coming out with more MOS versions

[@gfrog8888]

Awesome product but personally I just like a milled slide where the optic sits lower

[@jeffofalltrades8489]

@@gfrog8888 and that's great too! I just like this as an alternative choice! Thanks for the kind words my friend

[@realzeti]

Much appreciated effort! Thank you for sharing, I didn't know such product is available. Could you please make a video how is it a year later? Also is this also for G26?

[@jeffofalltrades8489]

@@realzeti ALL glock models and I still use it to this day!!!