Bestway Flowclear Soothing Waterfall Unboxing and Setup

[@csfitz]

Leaving out the part about the connections and going straight to water being diverted in makes this a uselsss video.

[@gabiwenzelow7348]

thanks for posting this video it helped tremendously I can read the tiny instructions but not really understand as well as if I would see it being done. I would have never figured it out it turned out the blue tubing was put in backwards when it arrived and that's why I was so frustrated until I found your video.👍

[@swimhappy3971]

You are welcome. I'm glad you found this video helpful.

[@juliansdiamonds]

Great job!!!! I love the lights !!!!

[@swimhappy3971]

This Bestway waterfall is available in Swimhappy Shopee and Lazada. Let us know if you have questions.

[@sassylashesla1031]

how did you plug the return hole in liner?? no parts came with my pump or pool large enough to plug the return since my hose goes to the waterfall now.

[@sarahjay2147]

Was hoping to see the hose to pump installation

[@billmoore6688]

How do you connect it to the pump and filter? I have an Intex 633t

[@swimhappy3971]

instead of putting the hose outlet to the pool, you connect the hose to the waterfall, it has also an adaptor included.

[@Mkgamer_2]

Is that pool inside the house?

[@carrieshelburne1063]

You did not show how to hook the hose from the pump to the best way device😢

[@dpyron5]

Does this work with the standard pump that comes with the bestway pools? Is it strong enough?

[@swimhappy3971]

yes, it depends on how strong your pump is

[@andynguyen7599]

can you turn it off without turn off the pump? thanks

[@GreysonLeard3]

I don’t see any return jets in your pool, does you waterfall filter it now?

[@swimhappy3971]

the return now goes to the waterfall

[@ArturBider]

It will be lighting without betteries only by water power ??

[@jennyparcia8841]

batteries are needed for the lights

[@marksy525]

pano plabasin ung water need pb ngbisang connector me filter pump ako

[@swimhappy3971]

you need to connect the outlet hose to the inlet of the waterfall. kindly share po your setup so we can check if you still need hose adapter. you may message us in Swimhappy FB page.

[@alnatola97]

Any updaters ?

[@swimhappy3971]

the water going to the pool should be redirected to the waterfall

[@azulgaia7782]

@@swimhappy3971 all the water? the intex waterfall has a valve that you can turn off the waterfall and let some or all the water go thru the return as usual. isn't the pressure too high if all the water goes thru the waterfall? thanks.

[@swimhappy3971]

@@azulgaia7782 it can handle pump flow rate of 530 to 3,000 GPH