BETA FPV ELRS Micro TX Module - 1W Vs 500Mw - FLASHING and More 💥

[@GTARC_au]

Lite Radio 3 ELRS: 👉 bit.ly/3t03V3l Nano Gimbal: 👉 bit.ly/3HenFFz Module Bay and Fan: 👉 bit.ly/3JNWtze ELRS Micro TX: 👉 bit.ly/30xvRkz ELRS Micro TX 1Watt: 👉 bit.ly/36mde5Z

[@ttp_007]

Your comments on the DIP switches position are reversed. ON in the up position, not down. Great video!

[@GTARC_au]

Yes! Thank you! All fixed now mate. Cheers SP

[@JALASCKARC]

I can't open the serial or Uart port! what to do? my computer does not recognize the module.

[@CarbonGlassMan]

I have the 500mw white one but mine has the dip switches. So far I have only seen the dip switches on the black 1w one.

[@GTARC_au]

There were a couple of variants made. Great piece of kit. 👍🍻

[@ssjeon7490]

Is the Micro TX Module compatible with the older JR PROPO PCM9X2?

[@richardh4689]

Are you sure you said the correct orientation for dip switches? Up is on and down is off. To flash you need 1&2 up not down. Unless I missed something?

[@GTARC_au]

Well picked up mate. Yes correct sorry. I have one of the 1st versions that didn't have the on marked above the dip switches.. I will be removing g this video and making the necessary correction shortly. Cheers 👍

[@billyb5057]

most interesting my friend *big like👍Au🧊full view to the end*

[@GTARC_au]

Thanks BB. Nice tech. 👍🍻

[@islandrc-duke1972]

cool video and setup

[@GTARC_au]

Cheers mate. 🍻

[@ntorres1966]

question. The betafpv drones can the be updated to the latest firmware for ELRS? I was unable to update them. I know in the past there was a problem with updateing but was hoping you know how to update. Can you assist. Thank you

[@GTARC_au]

All is well. I've fully explained how to update I'll add links to the firmware tomorrow. 🍻👍🍷

[@jeanfrancoisvandiest9729]

nice comparison my friend🙂👊👍

[@GTARC_au]

Thanks mate. Pleasure. 👍🍻

[@fpvfanatic]

My betafpv micro module when I plug in USB I don't see any com port. I do here a ding ding when plugged in but no com port shows up. What driver do I need to install for it to detect it?. Any help I would appreciate it. I'm lost.

[@GTARC_au]

All good mate. Download zadag. Install and run it with the quad plugged in. This will fix your com port driver issue if that is the problem.... let me know.. 👍🍻

[@joselllaguna8057]

Hi, Do you know what is the reason to obtain the error "please specify upload port for enviroment or use global"... thanks!

[@GTARC_au]

Sounds like your usb doesn't recognize the TX.

[@antoniofilipe70]

Hello I've a Radiomaster TX16s (version 1) and the betafpv expresslrs elrs 2.4ghz 1W Micro Module. I can't change the 10W value, in the module joistick or in the LUA software, Do you have an ideia what maybe is the cause?

[@GTARC_au]

Hey mate. Firstly have you updated the correct firmware version on your ELRS module. Also do you have the white or the black one. Cheers.

[@antoniofilipe70]

@@GTARC_au Thank you very much for the usual help to the community.. I've update (with success) both transmiter (betafpv expresslrs elrs 2.4ghz 1W Micro Module) and receiver (happyModel_EP_2400_RX) in the ELRS Software 2.5.1 version. I've have tha black one of 1W, but I can't change the Power, is fix in 10mW. I'm using the "regulatory Doman EU CE 2400, maybe is his? Is the 3.0.0.-RC1 version already safe?

[@GTARC_au]

I would stick with version 2.5.1. I tend to leave the RC versions for a bit while bugs are found and fixed.

[@dmitriykhalilov5220]

i think you meant switches 1,2 on upper position and 3,4,5,6,7 off in down position. Otherwise excellent video

[@GTARC_au]

Haha. Well spotted. Yes I've since fixed the error in other reviews. Was having a middle age day! 🍻👍🙏

[@j0rg9humbertosp33]

Muito bom vídeo. Saudações. ✌️

[@GTARC_au]

Good I rekon...

[@jonathanmrjonrodrigo1572]

its run a non opentx or edge tx firmware ?

[@GTARC_au]

Elrs official and Open TX.

[@SergioLopez-vu5lv]

Do u need to update the module

[@GTARC_au]

Its always good to but if you are bound and all is working correctly it's not super important. 👍🍻