Betaflight 4.3 Basics - Get your drone in the air!

[@elsonab4283]

I love it it's simple and easy to follow. Thank you so much for sharing your knowledge 🙏 . I appreciate you.

[@savvyone2737]

Great video. I have the same tmotor stack and am currently at this phase in my build. Very helpful

[@Polar-io4tx]

how do you know what protocol the vtx is using. and what the receiver mode is?

[@Maximolotov-g9f]

How do you find out what hardware you have on your FPV if you have not built it and you have no diagram showing how video receiver connected to flight controller to choose the right options in Ports menu in beta flight please ? Also how do you find out and get same software for receiver and transmitter for binding radio master tx 12 ? Thanks.

[@viniciusmaiasilveira616]

anybody has the link to the video he said about how to hook up your controller to your receiver?

[@Sovereign_54]

How do I know which protocol my VTX is running?

[@UnfairFrame653]

nice build and i learned something new

[@Mazekill]

hey i built this and when i plug it in it lights up but no sound it dfoesnt beep or anything

[@s4im614]

My Question how much you spent on that drone I lost my 260£ one it went somewhere and I think someone found and like stole :(

[@TRONCATFPV]

This drone cost $200 to build 😉 I’ll have a full build guide coming out soon 👍

[@gushoffman2978]

If I am going to build a fpv drone what brand of goggles would you recommend?

[@akbradley01]

I just flashed 4.4.2 on my iFlight Nazgul 6d, and my Gyro disappeared! Now what?

[@ArsenRadik]

I built the 200$ budget build drone and I don't know what motor protocol to use for it? could i get some help

[@TRONCATFPV]

Dshot300 should work good 👍

[@scottv5745]

Is this on the 2022 budget build? I’m debating building it as my first 5 inch quad

[@TRONCATFPV]

Just posted a 2023 budget build 😉

[@youtubechoices]

Do you sell, I would like to buy one

[@elswitche]

Hey I have build my second drone with elrs happy model 2.4 receiver and is bind to my elrs module. Everything is fine but when I go to betaflight it won’t show the roll, pitch, etc… moving when I move it on my controller. Is bind and everything but won’t do anything. My first drone works flawless but this second one I can get it in the air. I have a TX16s radio btw. Help me

[@TRONCATFPV]

make sure you have the "CRSF" protocol selected in the receiver tab. Also make sure you have the right UART selected for "Serial_RX" selected in the ports tab 👍

[@thesaltyseadog6054]

" wicked drastically" a fellow New Englander I see

[@wisider]

Love your videos, man. Thnx for sharing 😄🤜🤛

[@CristobalHernandez]

Link does not have VTX tables anymore

[@geri4781]

you found some? i also need help here

[@carlotv1212]

Can you please make a video on how to set up our Jumper remote or transmitter with Velocidrone

[@TRONCATFPV]

make sure you're using a data transfer USB cable and select the "joystick" option once plugged in. You should be able to set it up all through velocidrone.

[@carlotv1212]

Everything works up until I hit flash firmware. I get a message saying “Failed to open serial port” my computer detects the stack when I plug it in so I don’t know what the issue could be

[@carlotv1212]

After I open betaflight in github do I fork it ? If so which file do I click to download Betaflight.

[@carlotv1212]

I’m new to fpv man so I think for me and anybody else it would be good to not leave out the little details like telling people they have to download all the necessary drivers off betaflight so I don’t have to spend an hour searching and watching videos on why my betaflight throws that failed to open port error.

[@TRONCATFPV]

The only time I've run into the “Failed to open serial port” error its due to using a USB cable that isn't meant for data transfer. Try swapping your USB cable. Any driver you need to install may be specific to your flight controller or even computer. I haven't had to install any drivers to connect to any flight controllers on any of my computers. ever.

[@bladekindblacksmith9909]

What did you do? I'm having the exact same issue with my serial port.

[@carlotv1212]

​@@TRONCATFPV I am using a normal type C cable and when I plug it in to my computer from the drone it detects the Stack on Betaflight software but it does not work when I hit "flash firmware" do you think this is because I am using a regular C cable ?

[@carlotv1212]

Please for the love of god make a video on how to set it up on the Speedy bee app.