BetaFPV Pavo20 | A Bigger More Capable Pavo Pico!💪

The Pavo Pico is truly a trend setter in the FPV World, It’s light, quiet, and delivers smooth cinematic 4K videos. But what if you wanted something a little bit more powerful? BetaFPV has you covered with the Pavo20. So lets take it for a flight and see if it’s right for you. For more info, Check out: bit.ly/3tG7cZB
Buy The Pavo20 Here: bit.ly/3tG7cZB
Buy The Pavo20 Frame Here: bit.ly/3MhhxSr
Buy The Pavo Pico Here: bit.ly/3OuJeY1
Buy 3S Battery Here: bit.ly/3Qy0NZD
Buy ND Filters Here: bit.ly/454WrxW
Buy The O3 Air Unit Here: bit.ly/3HDwn44
Buy The O3 VTX Here: bit.ly/3WlZI73
Buy The O3 Camera Here: bit.ly/3BGCHUN
Buy the DJI Goggles 2(new version) Here: bit.ly/3As7PWi
Buy the DJI Goggles V2 Here: bit.ly/3AEyAZ0
* All links are affiliated unless otherwise stated, and helps support the channel at no cost to you. Thanks
Join me on Instagram: / onemanunmanned
RELATED VIDEOS:
Pavo Pico: • Pavo Pico - Mind Blowi...
Pavo25 HDZ: • PAVO25 1st Flight | So...
Pavo 30 Review: • BETAFPV Pavo30 | Setup...
Meteor75 Pro HD: • BetaFPV Meteor 75 Pro ...
Freewell ND Filters: • AMAZING Results From O...
DJI O3 Air Unit Review: • DJI O3 Air Unit - Shou...
DJI Goggles V2 1st Impressions: • Everything you NEED to...
DJI Goggles V2 Setup & Flight: • DJI Goggles V2 Setup &...
Bind DJI Goggle to O3 AU: • Binding DJI Goggles V2...
WTF OS Root on DJI Goggles: • Get More Features From...
BetaFlight OSD in you DJI Recordings: • DJI Goggles V1 & V2 Ca...
BDI Adapter: • BDI Digidapter V2 | Fl...
HDZero Goggles Unbox/Overview: • HDZero Goggles | A Beg...
Walksnail VRX 1st Impressions: • Fly Digital For Cheap ...
FatShark Scout HD: • FatShark Scout HD | Th...
Transporter 2 HD: • EMAX Transporter 2 HD ...
TinyHawk III HDZERO: • TinyHawk 3 HDZero 1st ...
#Pavo20 #pavopico #fpv

[@skillessllama2279]

Thank god. I had the filters in my cart now I can change them for vertical ones

[@Saruul_osman]

Great video and nice review of the paco 20. Im getting this soon as my main dji 03 whoop. ☺️

[@OneManUnmanned]

Awsome..It is a nice drone and flies great!

[@kurtzFPV]

Nice smooth flying, and it did well in the wind. Can't believe they have the prop guards in view. I'm really surprised the cages aren't interchangeable as well. I think if I wanted the higher performance, I'd just go to my little 3" with no prop guards. I can zoom the image on it too to remove props in view. I'm pretty sure it is quieter and performs better too. And the pico seems preferable for super close to people and indoors, which is why I bought it in the first place. I also think I'd prefer to give up 5g of weight for a vifly beeper than leds.

[@OneManUnmanned]

Haha..All good points. I wish the props did not show up either, but I did crop in a bit to have them removed. The beeper is a good idea though, over the LEDs. These small motors don’t output a loud beep.

[@fpvfun4036]

Nice flying 😊

[@OneManUnmanned]

Thanks, it was fun flying it.

[@IggyBiggy]

i broke my pavo pico trying to solder LEDS *facepalm* so I bought one of these instead. Really liked the pico (only got 2 flights) hope this one is similar

[@nickrich710]

Cool👍

[@OneManUnmanned]

Thanks Nick!

[@fpvmississippi]

Subscribed!

[@OneManUnmanned]

Thanks..I appreciate it.

[@melomaniakjm]

Ok so as a noob interested in this drone, what goggles and RC do you recommend?

[@mfrfpv9079]

Congrats on the pyrodrone spot 👏 😊😊

[@OneManUnmanned]

Thanks, I did not know it was on there..I appreciate the heads up.

[@sadshed4585]

Do you have any videos about lipo charging? I just got this drone set up after never having used dji systems(updating firmware and what not and setting betaflight settings on the drone) and the lipo charging process seems unclear. I have a 3s 450mah 75c, 5Wh, 11.1v battery and want to know what voltage to charge it to 4.20 I assume istead of 4.35v or lower than 4.20 and also what amp to do it at my charger says like 0.5a to 2.0a or around that range but I don't know which to select.

[@lalojr76ify]

Great video, I just ordered mine yesterday. I got the DJI 03 AIR to go with it, but how do you put those smaller individual antennas instead of the long 1. Appreciate the video and any info you can share. Thanks

[@OneManUnmanned]

I show how to do it in this video: kzbin.info/www/bejne/qme7nYyParqDaZY And a full Tutorial here as well: kzbin.info/www/bejne/aIG7mmSKjpdmfbs

[@andreazanaboni4757]

Great shots bro! Which settings did you use on the O3 to capture the videos?

[@OneManUnmanned]

Thanks….I think this was all done in Auto.

[@MrCroW71]

Hello, good day, thank you very much for your videos, I would like you to help me since I bought the Pavo 20, but I can't link it, I have the DJI remote control 2, I bought the BetaFPV Pavo20 Brushless Whoop Quadcopter - PNP ELRS (For DJI O3 HD Digital VTX), but not binding the RC, can I configure it? or will I have to change it, this will take a long time, thanks for your help

[@miketheknife2]

Very nice video,What controller are you using.

[@OneManUnmanned]

It depended on the flight, but Radio Master Pocket and Jumper T-Lite. Both on ELRS at 100mW.

Great content bro. Do you think Pavo20 can be used indoors? Is there a way to lower the power of the engines so that it is slow indoors?

[@OneManUnmanned]

It’s on the verge of being too powerful for indoor flying. You can search how to put a throttle limit on it.

[@lalojr76ify]

For someone new to the FPV flying I have a mini 4 pro and the avata so they come ready to fly. Do you happen to have a video showing how to install all the beta flight software to setup the new Pavo20?

[@OneManUnmanned]

The drone comes already configured with BetaFlight. The only thing you'll have to do is go to the "Modes" tab to assign the switches of your radio, and the "OSD" tab to customize your On Screen Display (OSD) layout. I've done a brief video on another drone. I'll leave it linked below: kzbin.info/www/bejne/oX-TnKGPht6haZo

[@lalojr76ify]

Greatly appreciate your help and videos! Thank you..

[@dronefilmsgermany]

How does it handle the wind?

[@OneManUnmanned]

Really good, surprisingly

[@SeeFPv-qm6ie]

What goggles do you use

[@OneManUnmanned]

DJI Goggles V2

[@ThatGuyPhly]

Great review!👏🏽👏🏽 New sub #StayPhly

[@OneManUnmanned]

Thanks for the sub!

[@toursian]

What things I will need for a complete setup?

[@OneManUnmanned]

You’ll need a VTX like the DJI O3 Air Unit, a radio like the Radio Master Pocket or Boxer, and an FPV goggle like the DJI V2, Integra or Goggles2.

[@officialjoeynguyen]

Too bad BetaFPV did not notice the props guards in view before releasing this one.

[@OneManUnmanned]

True

[@RoqueFPV]

Isn’t it possible to 3D print and better canopy?

[@Juacalvo]

is it very NOISY??

[@OneManUnmanned]

Not really, but does make the traditional Whoop noises.