Betafpv Pavo20 Pro Setup and Review

[@JakeBullit123]

Good video.

[@flyingpudding]

@@JakeBullit123 Thank you for watching and your comment!

[@fe-xe2dj]

Such an inspiring video! Well done! :)

[@flyingpudding]

@@fe-xe2dj Thanks for watching and your comment!

[@garionhk]

Wow. Great information for this drone. 👍😁

[@flyingpudding]

@@garionhk Thank you very much for watching and your comment!

[@macaronpompom88]

Great job🎉,very inspiring.

[@flyingpudding]

@@macaronpompom88 Thanks!

[@iamagob]

Great video, but background music is too loud.

[@flyingpudding]

Thanks for watching and your comment. I will make the VO stand out more next time.

[@CCC0122]

Nice Job! I wonder how long it will be before GPS will be available from Betafpv?

[@flyingpudding]

That is a good idea, adding a few grams shouldn't affect flight performance when the quad grows to this size. On the other hand, ELRS antenna position may also be a limiting factor.

[@CCC0122]

@@flyingpudding I'm not sure what you mean...?

[@flyingpudding]

@@CCC0122 whoops I got the wrong idea. I just realized that Betafpv does not have their own GPS module 😆.

[@blazemalan]

Why did you decide to keep the stock antenna instead of using the tiny one that most others swap to?

[@flyingpudding]

@@blazemalan the Pavo20 Pro is a larger and more powerful quad than the original - it is more than capable to carry the stock antenna, which it offers better performance while sitting higher and further away from the fuselage.

[@macaronpompom88]

Very nice🎉

[@flyingpudding]

Thanks for watching and your comment!

[@JamesHavoc84]

What size LED Strip should be ordered for the Pavo20 Pro? The BetaFPV site has 560mm and 750mm varients.

[@flyingpudding]

Mine measured at around 560mm. Please use my affiliate link to support my channel, thanks! shorturl.at/0ujVZ BTW the LED strip is included if you get the whole quad, unless you are looking to get the frame separately.

[@JamesHavoc84]

@@flyingpudding Thanks :)

[@carlosfuhrer]

great review, one question though are the ducts in view in low camera tilt regardless of the camera mounting hole that you use?

[@flyingpudding]

When the top holes are used, I can still get no prop view at zero tilt angle after Gyroflow post processing. A little bit of the ducts can be seen in goggles when flying with no tilt.

[@carlosfuhrer]

@@flyingpudding so ducts will be always in view regardless of the camera hole mount you use? I mean in view in the goggles not the final video

[@flyingpudding]

@@carlosfuhrer Yes, you would get tiny bit of ducts view at zero tilt while using the top holes.

[@RTSLV]

Which will better this or DJI neno and which will be more cheaper build or buy

[@flyingpudding]

@@RTSLV They are very different machines designed for different uses. The Neo is very versatile that you could even use it with your phone, while it is also very underpowered for aerobatic. For those who already have the G3 Goggles and RC3 remote, Neo may appeal to them as an affordable addition.

[@brandon9689]

This will run circles around the neo in every aspect of performance and video quality. But it is a manual control drone it won't self hover with GPS or be able to follow. Most importantly, it is a true FPV drone. It does not come ready to fly with a remote, batteries, charger or a video system. You need to have basic FPV knowledge to get this thing bound to a remote and up in the air. You also need to get up to speed on safe charging, handling and storage of Lithium Polymer batteries.

[@flyingpudding]

@@brandon9689 well said! Thus they are very different machines for different uses.

[@LoVeAmBiEnT]

Oddityrc. Check them out. Whoops that fly like freestyle quads

[@flyingpudding]

@@LoVeAmBiEnT i do have that frame but haven't got around to build it yet. It is substantially heavier though.

[@greelyguala5952]

Interesting ! but music too loud.

[@flyingpudding]

@@greelyguala5952 Thanks for watching! I will keep make adjustment in next one. 👍

[@momofpvdrone]

are you in Burnaby? :)

[@flyingpudding]

@@momofpvdrone Yes. Let's connect in IG @flying.pudding

[@duytruong5002]

Nice with O3 but can we do with analog instead?

[@flyingpudding]

@@duytruong5002 technically you can. You will need to some how secure the analog vtx in the vtx cage with the included 20x20mm adapter. I am curious to know why you would want to use analog with the Pavo20 Pro?

[@duytruong5002]

@@flyingpudding just wanna test with analog first then do the upgrade to dji combo, u know dji quite expensive lol

[@flyingpudding]

@@duytruong5002 ah yes, post your mileage!

[@tylerrothrock9097]

i gave up on binding mine lol. it would bind but it wouldn’t allow me to arm no matter what i tried.

[@flyingpudding]

sorry to hear. Please connect with me on IG @flying.pudding and see if I can help.

[@xXxCobraCommanderxXx]

Seems like an AI voice?

[@jordancalhoun5238]

Definitely an ai advertisement.

[@flyingpudding]

@@xXxCobraCommanderxXx Yes, I have started adding VOs in my recent videos.

[@flyingpudding]

@@jordancalhoun5238 Everything in the video except the VO is still "organic". Thanks for watching and your comment.

[@X862go]

Clearly, he's just a cyborg 😅

[@flyingpudding]

@@X862go 🤖"Thank You"