Honestly, L1T NEEDS to make IoT the way it should be.
@altimmons2 жыл бұрын
Allegedly “Thread” is supposed to do this. But it’s been delayed another year. It’ll be a consortium of standards for *secure* interop. I suspect it’ll be much more complicated than MQTT and Pub/Sub which is a bummer, but at the same time it’s probably needed. Fingers crossed it’s not a disaster. I think it’s been delayed another year again though you can pull up the current state
@TheH3nn32 жыл бұрын
using it with tasmota for around 2 years and a great benefit is that most sensors are much cheaper than the fancy protocol ones. the range depends mostly on the sensors and thats the only negative thing i can see
@spiralout1122 жыл бұрын
Did this a few months ago but switched to a cheap usb SDR with RTL_433 since it couldn't decode my lacrosse temp sensors or work with my wireless food thermometer. Have to say I like the 433mhz stuff though, cheap, low power, and very reliable in my experience.
@Catsrules12 жыл бұрын
And most sdr have a much wider listening range. For example mine is 25MHz - 1750MHz. I am listening at 900 MHz where my power meter operates so i can pull in my power usage.
@westhouse46412 жыл бұрын
Im sorry for my lack of understanding, but can i assume lacrosse in your context has nothing to do with a field or sports
@spiralout1122 жыл бұрын
@@Catsrules1 Yeah my food thermometer runs at a slightly different frequency too, rtl_433 is able to jump between both frequency's and read everything which is pretty neat.
@mveldt2 жыл бұрын
A standard RfxCom USB transceiver works out of the box for all 433MHz devices. Using it for years with several home automation systems. It never failed me in all those years. Yes, it's a bit more expensive than a Sonoff, but it's just plug and play.
@DmnkRocks2 жыл бұрын
raspberry pi with dvb-t antenna (via usb) and rtl433 does a lot with 433Mhz. besides other things, get the temp/humidity date from my TFA Sensors and my Pool Temperature Sensore :-D
@naehh73 Жыл бұрын
I love how you waited with the 3.3 volt/ murder warning until the end 🤣. In all seriousness I'm glad you mentioned it at all.
@mpxz9992 жыл бұрын
THIS. IS. SO. COOL! I’m so excited to watch your past (and future) diy IOT videos now! This was such an awesome video/topic! Thank you!
@0ChAnTi2 жыл бұрын
To all SDR USB Adapter user, this way you might get sent data from a remote or sensor. But the sonoff rf Bridge with tasmota is esphome you can send RF codes as well.
@Siroguh2 жыл бұрын
I' ve been waiting this series comeback for months!
@JamieVids762 жыл бұрын
I have been using this for a few years now (home assistant) with PIR sensors and touch remotes and switch remotes, but have recently migrated to esphome and the difference is amazing, I found with tasmota some sensors gave 2 codes so didn't work 100% of the time. The challenge with esphome was soldering that damned wire on to the chip. I have over 30 entities linked to it 👌👌
@VorpalGun2 жыл бұрын
Another option (at least in Europe, no idea if it is sold in US) is the rfxcom USB transceivers for 433 mhz. I have a first gen 433trx hooked up to a raspberry pi. Still going strong after ~8 years. No limit on the number of devices it talks to, unlike the device covered in this video. Not quite as advanced as a software defined radio, but it can do some raw packet sending and receiving if I remember correctly. It integrates nicely with domoticz (which is what I run), though these days home assistant seems more popular, and according to a quick search it should work with that too.
@johncnorris2 жыл бұрын
It is advised that you have a Witch Doctor, Shaman, or clergy member familiar with exorcism on speed dial before starting any IoT projects. You have been warned.
@0ChAnTi2 жыл бұрын
My understanding was you can receive and send any 433 code based on mqtt connection. The limit of a specific number of rf codes is only in the tasmota web ui. But based on raw mode you can send any rf code.
@jmonsted2 жыл бұрын
Damn, i wish this kind of stuff came with PoE instead of wifi and USB-power.
@0ChAnTi2 жыл бұрын
Actually, is have a lot of network socket spread over the house and I use in some locations PoE adapter to just get 5v from a network socket to power wifi/ ZigBee devices. So, you might have to prepare a wifi anyway, but you can use small PoE adapter to power any 5v/12v device.
@trowachess2 жыл бұрын
Level1Tech DIY IoT - Next L1T Oranga Soda!
@user-rx3ny9ji8i2 жыл бұрын
0:00 For the face of Wendell when his IoT toys work as they should without any stranger taking control of them with a ransom for 'disabling' them
@kenGPT2 жыл бұрын
433MHz is the same frequency of tire TPMS sensors, and those sensors transmit their unique ID number. So theoretically, you could track a specific vehicle around a city.
@SupremeRuleroftheWorld2 жыл бұрын
you could also use it to trigger scripts depedning on who gets on the driveway
@Henk147892 жыл бұрын
Or play a specific song when your pressure gets low
@SupremeRuleroftheWorld2 жыл бұрын
@@Henk14789 there is only one song that can be used: kzbin.info/www/bejne/b3bGm4qaYrRnoKs
@Ultrajamz2 жыл бұрын
Wouldn’t this only work when their tire is low on air? Its off until its low then it turns on. If it was the other way around it would use a lot of battery
@kenGPT2 жыл бұрын
@@Ultrajamz you can send trigger signals to wake it up. That's how they are programmed.
@carllinnaeus21492 жыл бұрын
Watching this like 10 times for the algorithm
@unifytechuk6 ай бұрын
I have a similar setup, however, I believe if you have it connected to an MQTT server, the 8 device limit doesn't apply (or at least I haven't hit it)
@FredsTech12 жыл бұрын
I ordered a dev set of ESP32 to do learn more and test some IoT things :) I know, not the same but maybe in the ballpark?
@matsl892 жыл бұрын
Shelly Pro series uses esp32. Thats some smart switches/relays😎
@lowfat322 жыл бұрын
ESPHome on the RF Bridge is a major improvement over Tasmota IMO. Especially for motion sensors. It is at least 1-2s faster.
@0ChAnTi2 жыл бұрын
I guess this is because tasmota updates sensor data only every 5 min , and does not consider those information time critical. But you can change the update frequency to make tasmota react similar fast du ESPhome I think.
@Darkk6969 Жыл бұрын
Would be cool to see if this works with La Crosse Technology TX141TH-BCH Wireless Transmitting Temp/Humidity Sensors.
@shotgunenvy26572 жыл бұрын
I'm interested in a proper, secure home automation kit or at least a structure you can use to DIY everything else
@GutsyGibbonАй бұрын
When purchasing RF bridge, how can you tell if you are getting R2.1 or R2.2. It usually isn't specified in the listing.
@mrbarrington-smythe90332 жыл бұрын
Thank. So useful! I have a Sonoff RF bridge flashed with Tasmota, but am finding the receivng range (line of sight) somewhat disappointing. Can you make a guide on how the internal antenna could be upgraded to improve this please?
@vfxdroneshorts963711 ай бұрын
What would be the range of this bridge? I had the problem with RM4 that it only works within 2 meters.
@dablet5 ай бұрын
any way to install a bigger external antenna?
@manaferetimizithra2 жыл бұрын
Wait... if you can put this at your basement for the water... can you put it in the basement and it will notify you if a kid ran away from the basement?
@EngineeringVignettes2 жыл бұрын
Water you talking about? Are you kidding me? O_o
@thomasesr2 жыл бұрын
I had Home Assistant for a while, I really prefer Openhab
@AzureFlash2 жыл бұрын
I keep thinking I'd rather have a LAN of things than an Internet of Things. Would be a LoT better for privacy :P
@TheH3nn32 жыл бұрын
after flashing it is completly local execpt if you (manually) let it search for updates
@DerrickJolicoeur2 жыл бұрын
@@TheH3nn3 people could peep on your sensors with their own IoT 433Mhz receivers. Scary when you think about window sensors etc.
@TheH3nn32 жыл бұрын
@@DerrickJolicoeur I don't really see that very critical. If you need to know if I'm home or not then there are better ways to find it out. But I wouldn't buy a 433 smart lock for my door ;)
@mrbbsdp26272 жыл бұрын
he wears nice shirts
@jmr2 жыл бұрын
I think you're mistaken about the 8 device limit. I believe you're thinking of a limit on TX(transmission) which I believe is 16.
@Level1Techs2 жыл бұрын
In raw mode it could listen but past 8 devices it was not forwarding events to the mosquito broker reliably. Could possibly have been a problem with the type of 433 devices I was testing though
@jmr2 жыл бұрын
@@Level1Techs I have a lot more then that working reliably. Any limit would likely be from devices interfering with each other.
@jmr2 жыл бұрын
Trying to count in my head.... 10 window sensors each with 2 codes. 1 mail sensor. 1 washer. 8 buttons. 20 devices shooting out 30 codes. EDIT:. I forgot about an RF remote... That's at least another 8 RF codes.
@0ChAnTi2 жыл бұрын
I think the same. There is no such limit of 8 codes to read and send. some remotes doesn't send the rf code long enough. I found pressing longer the remote makes it more reliable for the bridge. But I am sure that is configurable.
@jmr2 жыл бұрын
@@0ChAnTi My understanding is it gets a little more complicated if you want to send more then the standard 16 codes the device can memorize. I had an interesting idea though. I believe it's possible to add an IR led to it and you should be able to do both RF and infrared. The RF bridge with Tasmota would then be more capable then the RM pro devices.
@underwaterdigital5052 ай бұрын
Does this work without internet?
@lcarter1948 ай бұрын
I think Sonoff gives 16 ports I am still baffeled how you use them with tasmota
@particles3432 жыл бұрын
Remember to turn off yalls adblock for these people.
@VitorFM10 ай бұрын
This is outdated. Since latter 2021 it is only available the RFbridge R2 V2.2, that is almost impossible to hack and turn it useful! I just want to read and send a RF door command whenever necessary. But it doesn't recognize it, even if the 433 code isn't a rolling code! The sonoff RFbridge is just junk for me...
@SumGuyV52 жыл бұрын
Are we going to see a video on Wi-Fi HaLow? kzbin.info/www/bejne/j5DUnnaIZtiiaMU
@Aint1S2 жыл бұрын
Great video, but I'm not a fan of Sh_IoT...
@acubley2 жыл бұрын
Have you received special high intensity training in the past?
@Stopinvadingmyhardware2 жыл бұрын
Security systems that don’t freq hop are useless
@cheihkmoh9 ай бұрын
Don't work
@k9bob2 жыл бұрын
Any emission between 420 - 450 MHz would need a ham radio license. China garbage be damned.
@PaulTurley812 жыл бұрын
i have my ham radio license and i transmit on 433HMZ or 70cm band