Better than we Thought!! | Working on the Dresser TD25G Bulldozer

[@robertbressmer7742]

Your positive attitude is an inspiration for all of us Thanks Sam

[@johnwesner3935]

Hey Sam, for anyone who hasn't used a steam washer / cleaner it's day and night difference from a straight pressure washer. But, everyone saw the potential downside of steam. Thank Goodness you weren't trapped underneath when the hose broke.

[@dennymarreesr6187]

Another good morning when Scrappy has one up! Thanks Sam!,

[@bradchandler6967]

Oh those "do-it-yourself" hydraulic hose fittings bring back some unhappy memories ! Back in 1980 I was running a log truck up in Ossipee, N.H., and it seemed that every time I got way in the woods a line would blow, and usually when it's freezing cold ! Cutting that steel braid with a hacksaw is always fun, and screwing it together with a couple of adjustable wrenches. Of course air valves would freeze up while you were loading, so you had to try to find some dry leaves and small sticks to build a fire under the valves, being careful not to set the truck ablaze due to all the hydraulic oil soaking the entire underside. Fun times for sure !!

[@Rorschach1024]

How much pressure are those hoses rated for?

[@jaygraham5407]

I really like your little helper. Can't wait until he gets older

[@stevea9604]

Like the little one being safe in his eye wear…Mommy & Daddy are teaching him right 😎🤩🥰

[@johnobiro5202]

Another great afternoon watching Sam and his family. It doesn’t get any better. 🔧👍🇬🇧

[@Machines.In.Action]

22:04 - That engine purrs like a lion ready to pounce! You can tell this Dresser TD25G still has a lot of life left in it!

[@ianmckay1780]

Nice to see you had no problems putting the cylinder back, on your own Sam, it is just a matter of keeping the cylinder parallel to the bore and it goes in as easy as you found. Last one I had to do was 35 yrs ago so nice to see a youngster doing it for himself! Well done, as to all the other work you have done, well it was as expected of your skill level, NICE. I love watching you and Matt working together, two younger men who want to keep this old stuff going, and are doing a fine job of it, as they learn and transfer each learnt skill to another project! Hope you and your's have a Merry Christmas & Happy new Year, and look forward to seeing you in the new year!

[@stevea9604]

What you get when you combine hi IQ & high common sense you get Sam working like he does 🧐👍🏻👌🏻

[@paulforster4133]

Nice to see you starting the apprentice young Sam

[@donyoung6463]

Worked in a municipal garage in michigan, we use to make all our hoses using the same method, but we used a Ridged pipe threading machine to hold the hose while threading the new end on it, handy tool to have available when equipment was out plowing snow on a Sunday night and breaks or blew a hose.

[@billtodd6509]

Congrads on 100K subs.

[@ScrappyIndustries]

Thank you!

[@theabhominal8131]

thanks for keeping a machine out of Maryland's already over filled landfill.. most all Maryland's old machines just end up a pile of rust in the landfill.

[@rw3dog]

Looking good, nice work on the seals, and nice work having the little guy help…

[@Bonderoev]

Had a good laugh about your son looking at his now black and grasy hands, going "Uh-oh", and walking off-screen. XD

[@morgansword]

I am guessing the gen set is a winter project when snow runs you back from the daily but dang buddy.... liking that cleveland project

[@jaygee999]

Sam, your little guy's gonna have all the gals chasin' him !

[@rintin1874]

Great video, Sam, watching from Edinburgh Scotland UK 🇬🇧

[@waltermattson5566]

A perfect way to start a Saturday.

[@remiewatkins8032]

Love your videos Sam have a awesome Xmas and thanks for posting

[@Midwest-small-engine]

Enjoying the Td25G series

[@MySynthDungeon]

Saturday morning coffee on ,,Here we go! Cheers!;-)!!!

[@corydriver7634]

Congratulations on 100k subscribers, Awesome!

[@Tay651]

Just made my (Cold) Saturday morning, Sam! This one'll take at least TWO cups of coffee! Happy holidays to you and the family from NC.

[@stevea9604]

That young man has so much to learn…He will get used to dirty hands soon enough 😂😊

[@tomthompson489]

Nice looking machine I bet you’ll be happy with it

[@joerodrigues3816]

Great video as always mate wishing you all a very happy Christmas and a new year mate thanks again for sharing your experience with us all.

[@petereriksson4405]

27:44 if you do two complete laps instead of one when slinging it will stay in place a lot better and not slide as easy. We use it on pipes, cable etc when pulling and its surprising how much difference it makes. You can use it with a sling on a rope as well. If you do three laps thats what climbers call a prusik knot.

[@jamesbreault5762]

It don't get no better than a Diesel creek and a scrappy video back to back"😅 Sweet"

[@littlejason99]

Great video! Can't wait to see more work done on the TD25G!

[@williamprice3700]

Good to see a good father and husband!😀

[@proberts34]

Fun video, Sam. Thanks for sharing. The training starts early in life at Scrappy Industries (36:06). 😉 Gotta work on that aversion to dirty hands, though (37:00). 😄

[@RaviKiranSB177]

Nice evening tea with Sam 😋

[@bernardwill7196]

I with you and your family Merry Christmas and a Happy New Year. Greetings from Germany.

[@ScrappyIndustries]

Same to you!

[@garymessina1609]

Sam you've got great help great job and video thanks

[@janudholm]

🎉😊 100K. Well deserved. 👍🏻👍🏻

[@vipertech9108]

That engine cold start awesome nothing wrong with that power house!

[@michaellaskowski9866]

Congratulations on a 100K followers!!

[@irhusker6569]

Great vid as usual, Sam.

[@polytzai]

Video much awaited 🎉

[@Fatamus]

Morning coffee ☕️ and old iron 😁

[@billsrq1788]

Hello from Siesta Key Florida

[@BarnyardEngineering]

Scrappy Sam's got 100K subscribers! CONGRATULATIONS MAN! You're a big time youtuber now!

[@DavidHouser-p1j]

The 25G was one their good models a beast to boot. 😄

[@1959sdl]

As an airctaft mech. fo 45 years, if you could train a 3-5 year old, that would be the optimal size for working and inspecting. Merry Christmas

[@JimmyBoqvist]

Congrats on the 100k! 🙏❤💪

[@harveystephens6115]

Nice repair and dozer. Merry Christmas to you and the family!

[@stevea9604]

That rebuild was built well at the way it started 👍🏻👌🏻

[@merlepatterson]

Congrats on 100K

[@bobbypeck1999]

What a little helper dad

[@davidcolesr.8628]

Happy Holiday’s all, Merry Christmas and a Happy New Year to You & Your‘s Sam@ScrappyIndustries.

[@clarencewiles963]

Hello thanks for your video. Marry Christmas 🎄 and Have a wonderful new year 😊

[@Trains-With-Shane]

Great Success!!! Nice service on that unit, Sam! Hope you got the steamer hose issue resolved. If I don't hear from ya beforehand Merry Christmas and Happy New Year!

[@dannaomif1255]

Good video Sam, also liked the teaser outro

[@brianhubbard1621]

Go scrappy!!

[@billdornan4379]

Morning Sam. Merry Christmas from Sunshine Coast,BC 🇨🇦🎅🏻

[@stevewoodard527]

Happy Christmas Sam & family! Certainly enjoy your videos -- came over from Diesel Creek a year or so ago.

[@johndorazio3759]

That Dozer deserves a chrome stack and a new flapper😊

[@PatsPurposefulPutzing]

45 degree flare also used on refrigerant fittings

[@Jeremy-de2of]

The KT makes beautiful sounds it’s like bald eagles 🦅 lol she does sound good hopefully u get it all lined out n push some dirt r scrap have a merry Christmas

[@InsanePacoTaco]

28:40 Here you can see the Milwaukee impact in its native state: attempting to murder its battery. Its attempts are slowed by the shock absorbing mounts that hold the battery to the tool.

[@paulstaab1705]

If we don't see ya, Merry Christmas brother!!

[@grumpysgararge5860]

Bevel the end of the hose and the inner hose piece. Do not be afraid to use cordless tools to assemble them. Always carried JIC male to male union fitting for temp fix’s in the field….

[@jaygraham5407]

I hope the Desser/Cummins oil agrees with those CAT buckets

[@charleswalton5132]

I’m so envious of you and Matt. I was wondering if you guys have a D333 laying around for my D6c 74a ? I could come pick it up if you have a good one at a good price.

[@rongrose3746]

Sure does sound good !!

[@kylewilson9681]

When doing teflon seals wrap them with electrical tape and put a gear clamp over top let sit for 30 min and it will compress it makes install a lot easier

[@georgepeck-g4h]

did you fill the oil filter? mack sayes the turbo gets the oil first ,and a -10 fitting a 1/2 pipe fitting will thread into the hose fitting. saved my life more than once bypassing a drier .

[@GHOOGLEMALE]

"we'll swap engines if we have to, no big deal" 🤣

[@91rss]

put a lighter to the oil If it spits it has coolant in it. you can pinch the oil and if sticky ? its got a can or 2 of STP in it

[@nelsonmattoon150]

Sounds great

[@kenfrazier616]

score what a machine

[@tujuprojects]

You could put some cover under the hood to direct water away and it would not be visible.

[@Taxpayeroftherepublic]

The conveyer belting will trap water on the underside and rot out the hood. Can you add a lean too on the back of the building?

[@keepontruckinoutlawlife1248]

Great job driv,ah, your one smart dude!!! Happy holidays to you and your family 🎄⛄🎁☃️🎁❄🎅☃️🎅❄ oh who the hell is Jimmy?

[@grantensrud9185]

What no tools? You were ripped off. I used to hate pulling belly pans so much. I always made prior agreement with the owner. I kept all tools found 😂

[@markm1964]

crack the drain plug water will drain first then oil tighten plug keeps oil free of water only works befor start cranking merry christmas

[@jamessmith7691]

Now when you look for parts are they under the tractor name or what ? Figured you'd know if anybody would.

[@navahrnlaucke6194]

Fleetgaurd do filters for all equipment... cummins, cat, doosan, MAN, scanya, GMC, ford, all the above

[@kizerbread]

If u want to do a video on swapping a KT into my semi lol

[@09FLTRMM77]

MM77 Approved 👍🏼 👍🏼

[@tujuprojects]

You should drive that into sandblast drive-in.

[@localcrew]

This old girl is like a diamond in the not so rough.

[@johnwood346]

Had a steam geni do the same to me when I was 16 took all the skin and fat off three toes on my left foot by blowing steam through my Wellington boot while stood next to the failure point ouch much

[@Shockedbywater]

Good morning!

[@rmartin2763]

Do you stagger (off set) the split wear rings like you would rings on a car piston, or does it really matter?

[@prestonsousa5978]

Atleast Matt had his wife help him on Komatsu. Granted they did forget collar.

[@Greg_Gatsby]

Good content. 👍

[@tujuprojects]

Does oil molecules wear or does it only get contaminated with carbon etc particles? In latter case one could clean and use it indefinately.

[@ralphnorris-vk8ff]

It's hard to beat a Cummins unless you can find a Mack!

[@91rss]

friend in purchasing said you better be sitting down when you hear the price of Milwaukee repairs and parts

[@ozzyfranf]

Who makes that 1'' drive socket set you have?

[@ScrappyIndustries]

That’s a Sunex set I just got it not long ago I really like it

[@davidallinson2501]

When you were pushing in the first piston I think you might have sheared off a little bit of the Teflon seal ring on the right hand side. You were standing on the left and could not see it. Run the video and you can see just sliver appear. Hope I am wrong.

[@MostlyInteresting]

Watch Cutting Edge Engineering AU if you want to see HUGE hydraulics being rebuilt.

[@tujuprojects]

No wonder you always smile when you’re an Volvo owner. 😅

[@ScrappyIndustries]

The only Volvo I own is a loader lol

[@tujuprojects]

@@ScrappyIndustriesyeah, I wouldn’t get their car or truck either. But construction machines are good.

[@martinsrensen3297]

Try watching Cutting Edge Engineering australia. How he does rebuilt pistons rods he use the press for holding rod 😊

[@51ubetcha]

What is that rattling noise coming from your forklift?

[@ScrappyIndustries]

The exhaust is missing a bracket 😅 I need to fix that but it’s just her sound at this point

[@the59dog20]

I'm looking for a u blade for a TD15B I'm pretty sure one for a c would work know where I could find one?

[@rossnolan2883]

Cool 😎