Surveying~Lec 05~U2~ Linear Measurement & Chain Survey Part B3 Corrections in Tape & Chain by BKM

[@missssssssssssssssssss]

Sir please solve this question A steel tape 30m long between end graduations at a temperature of 27 degree celsius under a pull of 45 newton when lying on the flat. The tape is stretched over two supports between which it records 30,000m and is supported at two intermediate supports equally spaced. All the supports are at same level and the tape is allowed to sag freely between the supports. If the temperature of field is 32degree celsius and the pull on the tape is 75newton calculate the actual length between end graduations and the actual total length measured by the tape. Area of cross section is 7.00mm sq Mass of tape is 1.60kg Coefficient of exp is 1.1*10^-5 degree celsisus Young's modulus is 2*10^-5 nper mm sq

[@amitkumarsahu2729]

the length of a line measured by means of 20m chain was found to be 610.2m known to be 608.0m . what is the actual length of the chain ???????? plzz reply

[@ankitverma8882]

sir pls make video of environmental engg

[@KillBill-tq6fu]

Hi sir i m sameer from mumbai, Sir muze ek doubt hai 'S' is the no. Of smallest devision on main scale Lecture no.5 me ek problem hai jisme apne s ki value 1200 li hai But Lecture no.2 me apne ek problem me S ki value just 1mm li hai jab ki mere hisab se uski value 10mm honi chahiye. Pls ye kya aap is confusion ko dur karenge.

[@froudee_fundas9720]

Sir explain how formula has came, don't just say to memorise it

[@AshutoshKumar-nf5sh]

Slope correction ka kyshe bne ga ager L=30m and 1in20 ho to

[@nickblaze5753]

Pls sir complete the remaining subjects!

[@paripoornaraj7883]

sir correction in alignment me thora mistake hai

[@gsmusic7281]

Nice

[@er.mukeshmeghwalmakrana4724]

sr bmc ka lecture add kro

[@cutegirls4262]

I required full note of sarveing

[@RajPatel-rp2jf]

Thanks sir

[@rishabh3127]

Pm and po ko Newtown me kyu nhi liye jabki aap isse weight consider kr rhe

[@chen6406]

Here weight is same as force .. and SI unit of force is Newton so weight is taken in Newton

[@deepikasharma7571]

you must provide pdf of your notes in description

[@risky_world5692]

Atleast he is giving knowledge free of cost....and you want notes also. Make your own notes brother

[@gurudutt8838]

sir notes bnane me bhut time lag raha hai. kripaya apana notes share kare.

[@sh_one8]

Reply kyo nahi de rahe ho G...Bachhe pooch rahe hai kuch....

[@amarprakashnayak1193]

Shubham Thakur hi beta kaisa hai dudh pi liya

[@kndroidzone]

sir provide there pdf files

[@navdeepvyas2672]

or kuch baki ho ad k liye toh kero bhout kam ad h

[@Tunchitrades]

Speak English