Bicycle dynamo hub care and maintenance - Shimano Nexus overhaul

[@miljancvijetic6742]

The best bike maintenance video ever! THANKS

[@KGi4]

this is gold 🙌thank you so much for making this content . I actually have few bikes with this gear system that need maintenance and after watching it i can easily do it my self and save some money ;)

[@cyclemaintenanceacademy]

You're very welcome! I'm glad to hear that you found the content helpful and saved some money. It's great that you feel confident about maintaining your bikes now. If you ever have more questions or need assistance with anything else related to cycling, feel free to ask.🙂

[@piotrpakula3089]

This is dynamo 😎

[@jorgemosquerad6921]

Hello! Thank you for another helpful video. What kind of grease did you use for the bearings? Is it OK to use the same dark grease you used in your Nexus internal hub gear lubricating video? Kind regards.

[@piotrpakula3089]

Każdy smar jest lepszy niż jego brak 😉

[@cyclemaintenanceacademy]

Hi, and thanks for your comment. I'm pleased that you found the video halpful. I used a lithium grease but you can also use the internal hub gear grease. Hope this helps.🙂

[@nickwf70]

I have never attempted this job because i cannot see how you can be sure if the bearings are adjusted correctly as the hub does not turn freely because of the dynamo. Incorrect adjustment is going to kill the bearings very quickly. Having watched this video i might give it a try on one of my oldest hubs as grease is definitely dried out.

[@piotrpakula3089]

Trzeba sprawdzać luz koła

[@pabloarias1378]

Nice done video, thanks you

[@cyclemaintenanceacademy]

Thank you! I'm glad you enjoyed the video. If you have any questions or need further assistance, feel free to let me know.🙂

[@Vasily123100]

Great, does the axel spin smoother now?

[@cyclemaintenanceacademy]

Hi, and thanks for your comment. While maintaining the dynamo hub may not necessarily make it spin smoother due to the resistance, it certainly extends the lifespan of the dynamo hub, including its bearings, cups, and cones.

[@giuliospinelli6958]

I have a trough axle version of the dynamo. Have you any hint for that?

[@cyclemaintenanceacademy]

Hi Giulio, thank you for your question, and I apologise for the delayed response. I don’t have any updates at the moment, but once I get a dynamo wheel with a thru axle, I’ll be sure to make a video on that as well.🙂

[@Viagembikevlog]

Thank you bro ❤❤❤❤

[@onderbudak50]

Çok teşekkür ederim bu videoyu hazırladığınız için. Aynı üründen bende de bulunmakta artık kendim rahatlıkla bakımını yapsbilirim. Türkiyeden selamlar 🫡

[@cyclemaintenanceacademy]

You're welcome! I'm glad the video was helpful for you. It's great to hear that you can now handle the maintenance yourself. Greetings from Manchester, UK! 🫡 If you have any questions or need further assistance, feel free to ask.🙂

[@solarheat9016]

What? No replacement of the glue?

[@cyclemaintenanceacademy]

Hey, thanks for the comment. While replacing the glue could be a good practice it is not essential to do so.

[@rangerstormlucky9862]

It is better to hold the cone on the power side to adjust the bearing play with the 17 mm flat key, otherwise it can happen that the cone rotates when counteracting and the power wire breaks off. That is the unpleasant experience I had at work have.🙄

[@cyclemaintenanceacademy]

Hi, thanks for sharing your tip with other viewers.🙂

[@rangerstormlucky9862]

The cones are defective🙄

[@cyclemaintenanceacademy]

Hi, and thanks for pointing this out.

[@piotrpakula3089]

Dotrą się 😉 to nie jest rower wyscigowy