Bicycle Wheel Sealed Bearing Removal/Install: No Bearing tool!

[@BicycleRestorationMan]

Here's another short you may like: kzbin.infomGNeYUmVFF8?feature=share

[@drownfish-mn5to]

What size of the bearing this please.many thanks for your response

[@epikbaconb9780]

Bro I felt that hammer hitting the finger

[@BicycleRestorationMan]

Not that bad! Thanks for the comment. 👍👊

[@Ali_moutab]

Thanks so helpful 👍👍

[@BicycleRestorationMan]

Glad it helped thanks for the comment! 👍👊

[@whitefeatherslinger8194]

Cheers just what i needed i pressed my bearings on bothsides and left no way for strengthening tube to fit in the middle of the axle thats on heavy duty ebikes cheers👍

[@BicycleRestorationMan]

Excellent! Glad it helped 👍👊

[@gabrielo03]

I would use a large nut and bolt to press the bearings back on.

[@BicycleRestorationMan]

Good suggestion, thanks for the comment. 👍👊

[@drownfish-mn5to]

Hello good day to you, just want to know what size of the bearing?

[@tamleny50]

Very smart man. Thanks

[@BicycleRestorationMan]

You're welcome! Glad it helped. 👊👍

[@Виталий-й6б3й]

Thank you friend, it's the best video from me

[@BicycleRestorationMan]

I'm glad you like it and thanks for the comment! 👍👊

[@KINGABSOLUT]

Pregunta: cualquier masa de rin se le pueden poner ese tipo de balero sellado? O tiene que cambiarse la masa ?

[@BicycleRestorationMan]

Depends on the hub

[@gerardoantonioarayadelabar820]

.Hey, you saw when he hammered his fingers.😅😅😅😂😂😂

[@BicycleRestorationMan]

Luckily, I missed my fingers! 😆👍👊

[@onexdron]

Спасибо! Вы просто гений!!! Спасибо!

[@BicycleRestorationMan]

Thanks for the comment, your welcome 👍👊

[@gokulvlogs491]

Is this bearing hub or converted from normal hub ?

[@BicycleRestorationMan]

This was not converted. It was always a sealed bearing hub. 👍👊

[@romnickpalana4585]

i have that same hub the question is how to remove the bearing cups?because i want to convert it to sealed bearings

[@BicycleRestorationMan]

Replied to your earlier request. Thank you. 👊👍

[@imrahulnain]

Can i convert it normal hub to berring hub?

[@BicycleRestorationMan]

Depends on the hub. If the race is shaped to handle the round bearings. You would also need a cone nut to hold the bearings in place and make adjustments. 👍👊

[@darts-multiverse]

How to insert the bearing to the right depth, only with a washer, you will not go deep enough ?

[@BicycleRestorationMan]

It actually places it even with outer edge of the hub.

[@venkateshshanbhag8310]

Is the size of bearing same or varies from bicycle to bicycle

[@BicycleRestorationMan]

It can but since the axel is standard in these vintage bicycles I would imagine they're pretty much the same. Always measure the inside diameter of the middle hole and the outside diameter as well. Also measure the thickness. 👊👍

[@venkateshshanbhag8310]

@@BicycleRestorationMan Thank you

[@BicycleRestorationMan]

@@venkateshshanbhag8310 anytime 👍👊

[@pridsi]

nie ma to jak na kanapie w salonie naprawy ;-)

[@BicycleRestorationMan]

Tak, to jedyny sposób! 👍

[@robertmcfadyen9156]

Good method for Novatec HB series hubs .

[@BicycleRestorationMan]

Thanks for the comment Robert! 👊👍

[@daleyprojects]

bearing size?

[@BicycleRestorationMan]

Sorry, don’t remember the size. The bike is in storage now.

[@savinhohan398]

Mulțumesc !

[@BicycleRestorationMan]

Your welcome. Thanks for the comment! 👊👍

[@KhunglungSaikia]

Bearing size

[@BicycleRestorationMan]

Sorry, made this a while ago and not sure of the bearing size.

[@robertperkins5952]

Bonkers!

[@BicycleRestorationMan]

Thanks for the comment Robert! 👍👊

[@JohnHardiman-d5t]

My sealed bearings on my bob trailer are not turning well. The problem is that the axel is not removable.

[@BicycleRestorationMan]

Can you at least change the bearings?

[@JohnHardiman-d5t]

I had thought remove axel , use a drift to knock out old bearing. The bearings must press in and trap the axil. So what's the trick?? I'm old and not as smart as I used to be. Woppes

[@Junior-fd8ux]

Put the bearings in the freezer and use a torch or even a heat gun to warm up the axle where the bearing goes and it will fit right in

[@michaelcincochannelmcj]

What is the number of bearing

[@BicycleRestorationMan]

These are sealed bearings so there are 2, one on each side. Thanks for inquiry Michael. 👊👍

[@John-mb7yl]

Use a socket better than a washer, or u hammer damage the bearings not the race

[@BicycleRestorationMan]

Thanks for the comment! 👍👊

[@mrsunnyk3300]

❤❤❤❤❤❤

[@BicycleRestorationMan]

Thanks for the like! 👍👊

[@gnjrastogi3085]

Bearing no?

[@BicycleRestorationMan]

Not sure what your asking.

[@gnjrastogi3085]

@@BicycleRestorationMan means bearing's size?

[@BicycleRestorationMan]

@@gnjrastogi3085not sure of the bearing size.

[@nithin.m7990]

The song ahhh 😻

[@BicycleRestorationMan]

Thanks for the like! 👍👊

[@nithin.m7990]

You're welcome

[@BalkarsinghBallu]

Bearing number

[@BicycleRestorationMan]

The bike is in storage and I do not have any of those bearings around. Sorry.

[@Gromitdog1]

Good way to flat spot the bearings.

[@BicycleRestorationMan]

There being replaced! 👍👊

[@fuzzylogic33]

If the bearings are made of tinfoil 😆

[@Алексей-ю8м9п]

А если ещё и подшипник с одной стороны разобрать и в него побольше смазки добавить, то это будет вечность.

[@BicycleRestorationMan]

That it would! 👍👊