Big Block Chevy Cam Removal

  Рет қаралды 9,106

Justin Zimmerman (JZIM69)

Justin Zimmerman (JZIM69)

Күн бұрын

Time Lapse of us removing the Cam from our 1978 Sidestep Chevy. Just shows what goes into removing a cam from your big block Chevrolet.

Пікірлер: 10
@DesmoProfundis
@DesmoProfundis 4 жыл бұрын
I didn't mind the music and didn't notice any symbols. Great vid. A couple of things I would have done differently are: Radiators are the absolute first thing I pull, this is after I put a screwdriver through one as I was trying to be careful around it. I have to learn stuff the hard way so now I pull the radiator first and foremost. Next is the carb. I'm not sure why you pulled the carb when the whole intake has to come out anyway. If I'm missing something please let me know but this step seems redundant... unless you were planning to do something other than just swap out the cam. The harmonic balancer is the same deal. As far as I know that doesn't need to be pulled to get the cam out. But, again you may have been planning on doing other stuff as well, maybe a front main seal, who knows? Also... the kid... I know too well how kids start something with ya and miraculously disappear a quarter of the way into the job. Yours there seemed no different. "Hey, I'm gonna run inside for something real quick. Ya need anything?" Just for your ass to come back sometime before I turn 90 years old and can no longer work on your Shit! Lol! I don't know, I may be misjudging him completely. Just saying, your not the only one who's found themselves wrenching alone. Again, good vid. Thanks!
@joseguzman5970
@joseguzman5970 7 жыл бұрын
Nice like the idea of the foam black
@planedr
@planedr 7 жыл бұрын
Thank god for mute.
@Thran69
@Thran69 7 жыл бұрын
planedr Hard to find music that won't get the video taken down. Just trying not to have awkward silence.
@purewhite84
@purewhite84 5 жыл бұрын
Good video if it wasn't for that annoying music
@andy347495
@andy347495 5 жыл бұрын
I had to stop watching, the music was horrible.
@Thran69
@Thran69 5 жыл бұрын
Your right, as many other people have said this aswell. The problem is that we talking about sensitive stuff, family, money, this and that. I don't feel that this should be "seen" on the internet. Having an entire video with random moments of sound I knew would of been a nightmare. This was an attempt to make it enjoyable to watch, but also censoring the loud and personal moments. I'll try better next time and thanks for the comment. Sorry it was rough. It doesn't help I don't have an audio engineer and have to use "generic" sounds to avoid copyright. Ideas?
@andy347495
@andy347495 5 жыл бұрын
@@Thran69 it wasn't that big of a deal, just annoying. I think the symbol is what drove me nuts the most. I ended up watching it and turning the sound down. Thanks for the video though.
@Thran69
@Thran69 5 жыл бұрын
@@andy347495 So maybe next time, a better music choice with less symbols, at a significantly lower volume. I will remember this when making my next. Check out my other videos. I got one everyone will love. Thanks for the feedback 👍
Finally! Installing the cam in the BBC.
8:19
Olsons SpeedShop
Рет қаралды 12 М.
Why Used Toyotas And Hondas Are So Expensive
13:45
CNBC
Рет қаралды 827 М.
風船をキャッチしろ!🎈 Balloon catch Challenges
00:57
はじめしゃちょー(hajime)
Рет қаралды 26 МЛН
黑的奸计得逞 #古风
00:24
Black and white double fury
Рет қаралды 30 МЛН
How They Build the Legendary Corvettes in the US
17:26
FRAME
Рет қаралды 18 М.
How To - Install A Camshaft And Lifters
8:43
Tom Miller (Tom's Auto Repair)
Рет қаралды 206 М.
Ep. 13 How To Build A Big Block High Rise L88 Hood pt. 1
10:14
Justin Zimmerman (JZIM69)
Рет қаралды 3,9 М.
DID WE WASTE £10K BUYING A CAR AT COPART SALVAGE AUCTION?
23:41
salvage rebuilds uk
Рет қаралды 18 М.
I Don't Want To Call My Dad...
14:41
Matt's Off Road Recovery
Рет қаралды 135 М.
Stop Buying Vehicles Made in This Country or You'll Be Sorry
19:41
Scotty Kilmer
Рет қаралды 227 М.
Turbo Rebuild: How rusted engine turbo repair by The Mechanic
20:25
Corvette Carpet Install Tips and Tricks
8:55
Justin Zimmerman (JZIM69)
Рет қаралды 24 М.
Full Tube Chassis E30 w/ C6 Suspension and 750hp 427 LS
27:35
Larry Chen
Рет қаралды 3,4 М.
Monster Cane Mill Restoration: Pouring Babbitt Bearings on the Top Half of the Main Roller
30:45
Keith Rucker - VintageMachinery.org
Рет қаралды 8 М.