BIG CHANGES COMING FOR THIS OBS, FULL DAMAGE REPORT!

[@TNT-Racers]

Look up Gatsby trucks they have kits for like 350$ and there a grate kit I have the company phone number if you need it and if you want it I can send you the phone number

[@senditsteve8206]

Yes please

[@TNT-Racers]

[phone] is the kit. Mine is 1 [phone] if you want pictures of the kit text me

[@TNT-Racers]

SendIt Steve ☝🏻☝🏻

[@jimmywoo7875]

@@TNT-Racers where at in Michigan are you from? Im(517)

[@geopioneergsxr5357]

Are they made out of cheese graters or something?😂

[@StreetSpeed717]

Can't wait to see it road worthy! She was a good truck, and she will be again-

[@timmyminton7774]

Street Speed 717 your channel sucks

[@RustyWells2]

You suck

[@BassManBobBassCovers]

Stoked!

[@josephwallace7489]

Street Speed 717 your channel rocks. And I can’t wait to see how it’s gonna turn out as well.

[@josephwallace7489]

Timmy Minton you wouldn’t know the half of running a awesome channel.

[@carl3766]

Spray can job, cheap stock style fender flares off amazon, and new lights. It will look frikin decent.

[@penderpartyof2700]

Does his intro halfway through the video. 😂 the realest dude on the internet.

[@vontw33zy]

😕

[@lucaslobmeyer8312]

I like Mike and his Channel but the obs is in better hands

[@scioli700]

6:30 to 6:45 Mike never mentioned his wheels and tires setup for the OBS was *sponsored* 🤷‍♂️🤔

[@jake-rx9rs]

Are you nuts ! Lmao i feel bad for that truck now..

[@scioli700]

Twice on this channel.

[@jaydenreynolds9829]

Nobody: Steve halfway through the video:Good morning guys and welcome to the channel

[@armandogonzalez6822]

Hey you stole my comment I commented that an hour before you

[@armandogonzalez6822]

Actually never mind I don’t care

[@spencerd3696]

100% the perfect candidate for a Solid axle. Especially with the damaged mount points for the stock stuff, might as well change it over.

[@Slo6.7]

Spencer D agree.

[@justinsweeney2629]

Clearly the wisest solution along with suspension revamp/overhaul and cant forget the H/D style oem fender flares

[@Tyou57]

I love that you are going to save it something about give something life nobody’s else’s would and you feel more pride for the the project and means more to you than something new

[@gd1996]

I love projects, they seem to multiply on their own and they never get finished... I finish 1 vehicle and buy 2 more lol

[@scioli700]

6:30 to 6:45 Mike StreetSpeed717 never mentioned to viewers his wheels and tires for the OBS were *SPONSORED* 🤷‍♂️🤔

[@StreetSpeed717]

Yes I did lol. Pro comp gives me tires since I've bought so many sets with them. I buy the wheels. I announced this in a video when I first partnered with them because I was very excited about it. It was right after I got the Jeep. SPONSORED

[@Beandiptheredneck]

Damn dude I can’t wait to see that! Knew you’d find something to do with that truck. Only shame is mike wrecked the paint but I always liked that truck

[@eeller9350]

The obs looks really good on the 37's I know you will make it even better looking when your done with it keep up the good work and content love the channel and the Projects keep pluggin an chuggin

[@mikepoint4983]

Just like the comment Carlton said , spray can paint job , cheap flares etc call it done . But the straight axle swap would be sick . Then FULL SEND .

[@fatbuddycat]

This is already more promising than The Bruce. Do that truck some justice and build it tough Steve! Think leafs, solid axle, lockers, engine, trans, transfer..... Hammer down on it where it counts, this could be a real nice personal truck.

[@adammealey6721]

I like how Mike backed it off the trailer better 🤣 nice looking wheel and tire combo !

[@eddie3white]

Could you do the detailed install for the suburban please

[@airsami28]

This is what you are needing to grow the channel everyone loves watching shit get rebuilt I hope you do whatever it takes to make it right again

[@richardhartley1426]

I cant wait to see how this project turns out

[@darkpassenger7064]

Probably like everything else, half assed and half done.

[@mikedeotis526]

The truck aspect of the channel really suits you. Love the new obs build lookin tough. Liked it on 717's channel as well but i feel its better off with someone like you who isn't afraid to get dirty. No offense to Mike he has stated even recently he doesnt care to work on vehicles but to me it means more to work on your own stuff cuz you appreciate it more when its done. Im a mechanic myself i really only allow one other person to touch my vehicle period so i relate to your channel and you more but i do like the content mike puts out its just with more revenue he can afford more crazy stuff like McLaren and gt350's and thats cool an all but not attainable for us average folks who dont make 6 figures a year. Been watching since the day you sold mike the corvette. Never missed a video. You do have alot of projects but that just means there wont be a lapse in content ever just keep plugging and chugging bud your doing great and glad to see your fully recovered from your heart attack that had to have been scary. #1 fan

[@LupeSmasher]

Thank you for everything you do for us. Great content even though I haven’t watched the video

[@jpirelli1848]

Awesome. I've been thinking about solid axle swap for my obs Tahoe but I've also been thinking about going back to a 3/4 Square body Burb. I think I'll stick with the Tahoe now. Keep pluggin N chuggin Steve

[@Red_Beard_Builds]

that truck is gonna look sexy with a sas! But like you said a sas on a tacoma is a dream truck of mine! cant wait for the videos :D

[@BigC21124]

I’m going to buy another knife just because I’m thankful for the obs content 😆 been hoping you would get it and do obs stuff with mike and the blazer

[@4literfandaniel373]

pighater951 if you’re going to troll, learn proper grammar 🤔.

[@kadent7320]

You should paint the obs orange, great content.👍🏻

[@raywalters1109]

I've done a few SAS obs trucks and hands down the company I had the best service and quality from is sky manufacturing. Look em up.

[@juliuscullum6596]

Awesome I always wanted to straight axle a 90 model Chevy. I can't wait for the content.

[@tylerkristoff3888]

I’m very excited for this project

[@ernestovalencia1196]

Se ve bien con esa llanta Qué tipo de llantas son

[@GoodOlBoy1976]

I wish I could find Chevy rims like the ones that started on it in a 5 lug. I have the OG rally steallys and hate the way they look. I found some but they act like their made of gold. If you know anyone around NW Arkansas close to Gravette get back with me and we can work out some kind of deal.

[@braaapboys6683]

I’m so glad u got the obs ur going to make that truck badass

[@michaelgalvez8300]

I made a comment to Mike for him to Straight axle swap that truck I'm glad to see that's what you're going to do

[@stacyreid5077]

I've got an older 94 model GMC dually with 6.5 turbo an auto. It's 2wd and always wanted to do something special with it since it was my dads favorite truck. Kinda thought of making it a low budget drag truck. What do you think Steve.

[@sugybooks]

So did the truck not have the emergency brake hooked up when it was wrecked?

[@kevinmeharry4425]

Deserves to stay lifted, the truck looks better with the lift than it does at stock height

[@mrgmc6314]

Just a short list ... the 450 the bruce the obs the burban the dodge the 53 the gta the corvette am i missing any of his current trucks n cars ??

[@landyacht_7.317]

Sendit steve:addicted to projects

[@EASTSIDE-313]

Makes for great content

[@armandogonzalez6822]

Half way in the video Steve: good morning guys and welcome to the channel

[@funguy7979]

Love those back wheels. Hoping to find that style in a 17x10 and a big negative offset.

[@CRAPO2011]

These old chevys are tough as nails

[@shadowstang1833]

CRAPO2011 nails ain’t that tuff 😂

[@dannewton5363]

I think those rear lines should’ve been replaced when the lift was done🤷🏻‍♂️I’m sure you’ll get it squared away Steve, I’m glad to see this solid axle swap, I’ll be following this for sure 👍

[@Johnnytahoe19]

I like the new wheels more than the old ones

[@toddgirard391]

The OBS looks sick. Nice wheels.

[@lowlifemedusaxd3573]

What are the 37s? Super Swampers TSL Radials?

[@braaaaapp2464]

Sweet super excited for the sas kit right on

[@Gender1979]

love that comment, cute little tires this trucks getting while im sitting on 16 inch stock tires on my truck :P

[@chrismooney5737]

Can’t wait till I see you solid axle swap I been wanting to know what all you have to do can’t find good videos on here but I have a 94 Chevy truck 2 wheel drive I’m gonna sell it and buy 90 modal Z71

[@theanonymous3048]

Keep the green truck please KEEP IT

[@landyacht_7.317]

The lift on the truck is a 6inch lift

[@nickpraster8974]

Called it in the last vid ! Straight axle swap !

[@robertfoley6430]

Why didn’t whoever did the lift notice how bad the brake lines were???

[@senditsteve8206]

He made a bunch of new lines in the front plus it’s hard to know if it would blow or last forever.

[@EASTSIDE-313]

Why fix something that's not broke?

[@kelliegrase4658]

Sounds like you have a cold bro. Hope you feel better soon

[@merkurrz]

Thanks for another great Video Steve

[@danieljohnson3453]

Got that same set of wheels on my 92 full size blazer with 33's

[@WhiteBoyChevy]

YESSSSSSSSS LOL THATS GOING TO BE A BAD ASS PROJECT IM EXCITED TO WATCH IT

[@tylerfugate1992]

Wheels and tires makes it look even better

[@travismcginnis2745]

With as much towing as you do you should get a 24" gooseneck lowdeck with added neck for lifted truck. I had one built a year ago and love it. With drive over fenders so u don't have worry about swapping front tires just to trailer these projects

[@aslamb6489]

Steve you need to align that passenger side wheel a little TOE IN TOE OUT because you will eat that Tire up faster than you think it needs to be adjusted a little more in me personally I would not drive it very far like that not with that good Tire on it yes put it on there when you get it aligned

[@TheBiggestRedneck]

Hellz Yeah Steve It’s Definitely Gonna Be Better Strait Axled

[@jamesparker2613]

The obs looks nice.👍👍

[@fishingandcampingchannel8682]

I love Your videos so much keep up the great work

[@salvatorebaleno9807]

Nice shirt. Yuengling is so good!

[@matthewobrien4112]

I knew you were going to sas the green truck

[@STREETRACEN4U]

i knew right when i heard him say "do what i want with it" when talking about the front end thats what he was gonna do lol

[@tony45292]

I can't wait for the sas maybe it'll make me sas my obs chevrilac (I call it that because it's a 95 chevy c1500 with a Cadillac Escalade front clip....and its orange)

[@gregorycarter9352]

That’s one sharp knife

[@stevenreynolds2327]

Love those tires

[@rocasio3]

The garbage truck came to pick up your garbage lmao sorry bro had to ... keep up the good work.

[@simonorr594]

Jesus, Steve, no wonder you had a heart attack! Are you powered by Duracell?

[@senditsteve8206]

Just got to keep on keepin on

[@jaysonburns4423]

You need a back up truck ..the Bruce is already a straight axel k 5 basically..just replace the broken parts on it and put a new fender and hood and grill on it...I would love to see that truck he a lifted partial restoration...sell it to me for if you gonna tear it apart man.. I'm telling you lifted and replace broken parts is the way to go .you already got the lift so just make it nice now and reliable

[@mikescott6647]

Can't wait to see it sas

[@chasimerefarrar1057]

I love the obs blue truck

[@josephwallace7489]

I kinda wanna know what’s all gonna happen. You should check on getting it painted.

[@camdendewitt5882]

Hey Steve when is there going to be a Fred update?

[@senditsteve8206]

Tomorrow

[@db00crash]

Wanna get rid of the spacers that were on it?

[@Kingdom_Kid]

SENDIT STEVEE

[@Father_Nature88]

Can I please buy these wheels and tires for my Jeep Wrangler if you ever get new ones? I don’t know how to dm on KZbin.

[@imtonedeaf1]

perfect stock class mud truck

[@matthewzemble4456]

Sky manufacturing has SAS kits for obs chevys for a good price

[@Kingcadillac816]

I know these ones replace above tank but every one intrested in these should check above fuel tank also there horble about rusting out above the tank

[@randybryant9936]

I had those rims on my truck

[@connersigstad8224]

Randy Bryant what brand are they

[@randybryant9936]

@@connersigstad8224 helio

[@connersigstad8224]

What brand

[@randybryant9936]

@@connersigstad8224 i believe they are helios

[@erico4339]

Urban bourbon for the win!

[@danbrown7224]

Just what the channel needed another project

[@senditsteve8206]

I’ve been thinking I don’t have enough why not have more 🤷🏻‍♂️

[@thatsilverxj7874]

I personally would like to see D60/14 bolt swap... just my two pennies though

[@lighostygaming9645]

Kinda feel like flat bedding it would be nicer then the rusted truck bed or trim it rally truck style 💪

[@jacobsearle5654]

i would leave it the way it is it looks great the way it is

[@LupeSmasher]

We love you Steve

[@shunsato6621]

Sorry Steve what does OBS stand for again?

[@jmorginski]

Believe its "old body style"

[@shunsato6621]

jmorginski thanks dude!!

[@jasonhollander1170]

Steve make longer videos please !!!

[@BassManBobBassCovers]

SEND IT!

[@jeromeburrasca6710]

You're crazy if you don't do a long travel 4x4 Prerunner out of that truck!! ;)

[@TheCarEMT]

Do you and mike call each so you guys can upload at the same time both of you upload the same time always

[@millennialtrucker8234]

Y don't you put that 7" lift on the burban??? That would look sick as shit!!!!

[@travisreising3972]

Nice wheel choose Steve they look amazing way better then mikes steel wheels

[@funguy7979]

2 or 4wd?

[@jonathanward246]

Awesome!!!

[@dantheman9395]

I knew it. Can’t wait to see it

[@darkpassenger7064]

Actually for a straight axle swap it's better to start with a 2wd frame.

[@EASTSIDE-313]

So what? This is still a perfect candidate.

[@tacticalbreadman7409]

SHITBOX STEVE!!!!

[@ajpena8332]

Fuck yea bro I got a obs and been wanting to do this

[@tylerparrish5754]

Keep the rough country lift please,put it on the straight axle

[@brandonparrott890]

How is he going to use a ifs lift kit on a sas swap?

[@connersigstad8224]

What brand rims