Big Frank: How to bond glass simply and safely | UV-Verklebung sicher und leicht gemacht

Big Frank: How to bond glass simply and safely
This video provides directions for how to bond glass simply and safely with Bohle UV-Bonding Technology.
The directions are provided by master glazier Frank Ruzicka, more popularly known as "Big Frank".
UV-Verklebung, Glaskleben, Verklebung von Glas, Kleben, UV-Kleben

[@seriphone]

You're the man Big Frank! Hopefully I can get your products in Australia

[@gcs1903]

GLAZING AND CONSTRUCTION SUPPLIES STOCK THE BOHLE RANGE OF UV PRODUCTS.

[@calvada1]

Prepare to pay $$$$$$$$$$$$$.

[@CyberChrist]

The Chuck Norris of glass bonding :)

[@cozyhappy]

It's very string bond👍👍thank you very much for uploading this video

[@Lechovux]

woah, that burner is so cool

[@jayc2469]

6:56 No wonder Big Frank looks a bit knackered after 24hrs of standing up holding the UV lamp

[@baldanddangerous1572]

lol lol lol

[@ak47nme]

and does this work on starfire glass as well?

[@TheOpelkoenjas]

Kinda overdoing it if you only want to make a terrarium (for example) from to time. I think this is more suitable for someone who sells glass articles as a source of income. Never the less: the instructions are excellent and very well detailed. Sadly enough, it doesn't tell how much weight it can take before it snaps, for example if you would fill it with water. And if the products are environment friendly (fish, plants,...).

[@Kabodanki]

+TheOpelkoenjas no shit sherlock, it's pretty obvious for me

[@starprring6642]

lololol .. knackered but a beautifull smile.. great video thanks!

[@MrTCereal69]

could i essentially use this bond method to cleanly make a glass vessel that houses water correctly?

[@mycool8980]

Is it aquarium safe? Could it hold water?

[@gelakhintibidze3535]

I like your technology, where to buy ... glue, lamp holders,., Everything Included

[@ryanbarker5217]

not sure why so many of y'all thinks there are so many steps when they're just being very careful to make sure the bonding surfaces are absolutely clean. sure, this is fancy equipment that you can DIY, but beyond that it's cleaning, burning off what you can't see (maybe a bit overkill, idk), heating up the area for primer, and just like for acrylic add the bonding stuff. it's UV bonded, so a UV light is needed, which are probably expensive based on the ex's tanning bed bulbs, or take it outside and let it set under the sun like you can do for curing emulsion on screenprinting screens (not the best process, but possible). sure, i'm guessing most are just making jokes about the steps, but for those who aren't joking apparently have never built anything before! lol. not sure what other methods/equipment/materials there are for this stuff, but i wonder if they are any better than this one?

[@friendinpakistan]

Are the bonds are acid resistant?

[@torymartinez2439]

awesome

[@sarangshirsat6995]

Nice any aquarium special tools/glue?

[@AhmadMabruriBBeruri]

Hmmm.. I thought it will be very simple.. Because the word "simply" attracted me..

[@WOLF2JAK]

Wow all i know to Bond glass is using silicone sealent 👍

[@woshigepro2]

But... I just wanted to make photo frame..

[@mianatifhussain2381]

Silicon inventer just died again while watching this 😀

[@emadaledn8880]

السلام عليكم ورحمه الله وبركاته هذا الرجل نازيه جدا جدا وحساس جدا جدا ابلغ تحياتي وشكري الكبير ياريت يكون في فيديوهات بنفس الطريقه او بي طريقه احدث وياريت يحدثونه او مترجم باللغه العربيه شكرا:-)

[@sherawillium7046]

Super

[@snagcrew9841]

How does he lift the pump angle suction cup for the glue to go under glass.

[@hamidrezaashrafi9399]

That is fantastic

[@ak47nme]

will this work for an aquarium? how strong is the glue?

[@BotanAbdullah]

I want this for aquarium as well.

[@TheMILESACUBURE]

is that glue water proof, and is it healthy if i put alcohol in bottle after gluing ? please answer to me. thnks

[@sharzanco]

Hi do you have for Clear acrylic? Acrylic to acrylic and acrylic to metal?

[@pocholomanalac9561]

Is this stronger than bonding with silicone? Can this be used in aquariums?

[@antayudi5428]

How to bond it side by side to become single piece of glass without seam?

[@mdkawsur6631]

Can you find glue for attaching cracked glass to cars .. ??

[@freedomHK1]

Yessss « SIMPLY » 😂🤣😂🤣😂🤣 But ............... why iam here ?!!!!!!! 🤔😎

[@brookskioschos6494]

Wh what

[@brookskioschos6494]

I'm here cuz my bong broke:(

[@Andre_Gouveia]

touch you finger with this flame and this glove and you will see how beatiful it turns!

[@Z-add]

Can this create a water tight fish aquarium

[@satishmalhotra2726]

Good

[@user-qi4vw6gb2n]

رائع جدا

[@atles7946]

Reptillary 4 gulog 2016

[@danpassisnik2151]

Very SIMPLE!!!!!!!!!just 1267878 steps!!!!!

[@faidularcs]

What's the name of special cleaner

[@jonathond1982]

I'm just going to go out on a limb here and boldly say "Theres nothing "simple" about what is demonstrated in this video". Additionally it doesn't appear to be cost effective either.

[@chrismiseur2955]

Glasverlijmen

[@manlymcstud8588]

i'm going to go out on another limb and say most of this kit is stuff you can DIY, and 'special cleaner' is probably watered down white vinegar that hardly 'specially formulated' for glass. i mean, you're hitting it with a heat gun *then* a torch, so i dare say whatever contaminates are they are burned away.

[@jbsoul4575]

This is how you make a $200.00 glass table for $1800.00

[@Pervatory]

Haha. He said loads.

[@shivamdhiman9264]

Where market i purchase glss cuting kit

[@cryora]

Is it vacuum compatible?

[@MarcioCastro1]

Simply???

[@tisoy909]

is that the man in the ikea factory?

[@lucanhtu9764]

I have 5 years experience in cut glass. Can I work for you?

[@fbussier80]

How much load can the bond hold? Is there a formula, using bonded surface area, to calculate such loads? The product greatly interrest me, for use in my business, but i would like to access such details...

[@Hellsong89]

This would be good information for regular user too and should have been included to video. I'm guessing its not worth waiting a reply from them, but to directly contact the company.

[@dineshsoundararajan3274]

Did you by any chance find the answer?

[@edmundooliver7584]

it is simple he's just showing different clamps you could use you don't have to use every tool you could just use super glue.

[@mohamedhaneefa4429]

namaste

[@Pmz604]

is the adhesive waterproof ?

[@giorgiopradella]

no!

[@Mark_Nadams]

Bohle UV Adhesive Verifix® B 665-0 UV curing · thin and crystal clear · good capillary action · for bonding glass to glass · low viscosity · time-saving · not waterproof over time. So not for aquarium or terrarium. Well suited for glass tables, bookshelves, and vanities.

[@apivaping5476]

Let someone with a tie show you a lot of bottles and "interesting stuff" and it looks already really a lot.. LOL

[@1618mm]

Check another options this is expensive and the equipment make it non suitable.

[@andrewgervais3039]

3:28 Careful of that tie.

[@Tanks124]

good afternoon, my question is this. this type of adhesive withstands high pressures? for example, the use of tanks 200 and 400 ltrs? thx

darito124 That´s adhesive is not for water tanks

[@ScooterFXRS]

They give a damn so much they never bothered to up date the link.

[@TEMUCHINYONGA]

Just fucking go and buy a Loctice, clean it, apply the glue, and that's fucking it for fuck's sake... He's literally making a surgical fucking operation and I'm watching it like 5 fucking straight minutes to wait and see what the fuck will actually happen...

[@andrewaway]

And fuckin fuckin.

[@jess60901]

Fuckin' A.

[@valken666]

The instruction in the video can be used for a wider range of applications.

[@robertw.1499]

Fuck the Fuckin Fuker, Fuck head 😂

[@madderall_dot_com]

The F*** bombs were appropriate. I was lead to believe this was an instructional, not a promo. This was the latter. He sure knows how handle glass, but it's really unnecessary for a table. Would've liked a real-world example, not a "lab" example.

[@romaineathey6512]

I am so sure that you will find good way to make it on woodprix.

[@robertkattner1997]

Use clear clear silicone, the one that is used to make aquariums, 10 gal -200 gallons, the glass does not come apart when filled with water. Cost - $ 20.00.

[@rabwoody264]

Now you can see why all the top end bathrooms costs mega bucks .. good information, but rarther like watching paint dry.

[@RobertSeviour1]

More like watching glue dry actually.

[@abrhamagizaw825]

DEAR pls Iwant this material taping i am glass workers

[@haywardglazing3522]

it is a video of HOW its done ....and customers still say ....How much !!!!!!!......and this is why

[@philouw2633]

quel bazar pour fabriquer un bac vive le silicone !

[@mariamnashat6399]

Wederfull

[@poppy3879]

The whole video i thought it was about bending glass

[@haywardglazing3522]

and still should remove the tie........

[@cakonemicke2198]

epoxy

[@omarfarouq1890]

007

[@jhonpaulbalicat7620]

what if i use silicone selant.,. what is the deference?

[@RobertSeviour1]

Yes, what is the deference? I prefer to refer to defer, if that''s what you infer. Shall we confer or are you outfer lunch?

[@nikoligogle3153]

"Two Roonies" eh! :D

[@myrthenboermann5979]

this isn't the easiest way for bonding glass..

[@clintparsons3989]

Steel wool? On glass? I would have thought that steel wool would scratch the hell out of glass.

[@edmundooliver7584]

0000 aught is super fine like cotton.

[@DilipKumar-ne8oc]

Dilip Kumar

[@DilipKumar-ne8oc]

very nice

[@ocota831]

@6:43 imagine it breaks lol

[@princemari_4047]

Simply they say.... I just broke my mother's glass cabinet smh😢😢😢😭 I'm gonna DIE

[@tulius01]

If Bohle is such big player in this field, I would have expected a much more professional commercial at least with a native speaker and not something on a home made video level.

[@RobertSeviour1]

Zey are Tescherman, zat ees the reason.

[@charlesmcboy445]

do you care for a beer?

[@tifu678]

This is a rip off from DIY Joey. He did his version with plywood though!

[@haywardglazing3522]

its not glass then.....dick

[@alexanderokak5112]

Or you could save £1000 and 30 hours of your time by just applying some super glue and holding it. -_-

[@eugenebrink4410]

Alexander Okak Super glue will pull loose after a short time period....this method holds for many years

[@marks99999]

I bet Big Frank could make it work with super glue.

[@xxrgxxcasco]

If not super glue, Lock Tite.

[@niteshsah4966]

Fetug

[@pobrengit2642]

That is nowhere near simple.

[@adrienperie6119]

Pure asmr shit

[@rashellgabiana496]

"Simply" But too much. Talking and steps😂

[@ionpopescu4303]

What a horrible Clip ! Is it waterproof ???? 7.55 Minutes for nothing. Just talking