BIG SHIP STERN TUBE AFT SEAL - INSTALLATION AT OMAN DRYDOCK -

A stern tube with bearings radially supports the propeller shaft from the main engine. The stern tube is a hollow tube which accommodates the bearings, the seal boxes and the propeller shaft.
The stern tube is filled with oil, grease or water and forms a barrier between the water outside and the engine room inside the vessel.
The main advantages of stern tube aft seal’ are:
Short built-in lengths due to integrated guard.
Very good protection of the propeller shaft system against sand, debris, (sea)water, etc.
Aft seal is applicable within oil lubricated, grease lubricated and closed - l
CLASS type approved.

[@1mw4tch1ng]

I know they are professionals but sliding the outer seal of the main ship bore shaft on the prop shaft can be nicked and scratch. any seals installed between the damage shaft 5:22 can fail and leak. While hammering the out seal in place for nut insertion the hammer can accidentally hit the prop shaft and damage

[@MarhumahAlip-p1r]

Hllo poh ser powedi ba mag tanong

[@abdulkhakiqkrishnan3235]

Chief Joel - That was me in the video, thank you, Hope you can visit us again here in Oman Drydock.

[@carleighocampo216]

Life's of a Seafarer no normal working schedules, needed to sacrifice to work away from their families

[@kirstenbelleocampo5604]

it's big stern tube seal

[@marinerongfilipino5812]

This is huge propeller

[@xavierusgamilde]

Interesting

[@vipulkushe6208]

Good video

[@aieshazuleyma8563]

That was huge, so happened to glimpse also on the propeller below it was so big, your job chief is really complex and interesting.

[@quantumstorm4531]

There is no such regular hours of work in your Job men! Keep uploading interesting video with regards to Ship

[@arnulfosumawekwek]

Seafarers is jack of all trade and regular hours is always broken.

[@mayumisibulo1772]

Woah!

[@exceedmanpowerservices6537]

Thank you for sharing

[@samirmalik2676]

Wow thanks for including us on your video - hope to spread knowledge in Marine Engineering

[@jackstewart417]

This video does not show the engineers replacing or putting in the new Seal Material. It just shows them pushing the Seal housing up to the shaft housing.

[@luzzcess7358]

Really amazing how seafarer conduct their job

[@JoshuaDavidLacsib]

So that's seal the water going inside the Ship

[@tomahawkhans1686]

The wonder of engineering with this special sealed.

[@dodongdakotv689]

Thanks for sharing your knowledge sir.👏

[@ashleyjeon3873]

Learning so much with your videos with regard to ship

[@arnulfosumawekwek]

Interesting job you have

[@asiaruby4167]

Learning a few about ship parts with your upload

[@hassimabdulah5993]

Hi Chief that is our team taking care of your Ship

[@uwekpalasak8893]

First time to saw stern tube seal being installed

[@JollibeeMcDonald]

This is very interesting job, engineering at its best.

[@vergarasibulo8436]

Oh no, that is a huge piston

[@aliyousof5791]

This is really good Chief

[@ChrisvinTambatoy]

Good information mate

[@woodypioneer]

Very informative

[@kristen7378]

Your ads are amazing

[@andrekasim6461]

Good job bro

[@woodypioneer]

Nice experienced

[@KCdelicaciesLacsib]

Keep posting.

[@SherlilouAlbandonate]

Good job guys

[@LouiseArchery]

Good info.

[@mayumisibulo1772]

Good info

[@realistn9343]

The brand seemed to be Lagersmit, Holland....

[@jobsseaman477]

Wow, so that is how it's assembled.

[@JesiccaDaculcol]

Great Job