WHALEN XAVIER 3-in-1 TV STAND from Walmart Model# XL-44E REVIEW

[@SheOnPurpose]

Great job!!! Thanks so much!!! I have a 65 inch and I was thinking about this one but I don’t want mine to overlap…. So thanks so much for the attention to detail in the explanation 👍🏽👍🏽👍🏽👍🏽👍🏽 God bless!! I’m here on Thanksgiving 2021 🍁🍁🍁

[@jace15076]

For those wondering, this stand is 50" wide. A 58" Samsung is 51" wide. You can mount up to a 55" Samsung without overlap. This is the best stand you can buy for $149.

[@truexreclaimer]

Thanks for an honest and straightforward review! Going to buy this for my 55' Samsung

[@JasonLee-t3b]

Mounted my 70” and it hangs over maybe 2” each side and very sturdy! 70” fits great listen to the manufacturer

[@diannewashington7517]

I just received mine today. Thank you much for the video, awesome job!!!!!!!!!!!

[@DarthVader964]

How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well

[@MRSEEK100]

@@DarthVader964 I know it's probably too late now, but I saw someone using a little bit of soap to slide them in easier

[@davidc3833]

I have a 65" I just purchased this tv stand! Only problem is! It's still in the box 😆 wish I could just pay to set it up lol

[@sniperghostshooter7161]

Lol same

[@angeljackson6475]

I know this is 2 years later but we’re you able to get it mounted. I’m having that same issue now

[@sarahskies3568]

Getting mine on monday, can't wait to get it!

[@Diana-uk8ql]

Good on you getting it set up Mines was just not working. The middle shelf was way off. Had to return. :(

[@supermanx8711]

That was because which of the 3 holes you use depends on which height of the middle shelf you chose to place it.

[@Confidential619]

2:08 good to know, because I wasn't sure if my particular tv would fit on that so incase it doesn't I'll just not use that.

[@jamescole1234]

Think u sir just got my today it looks awesome can wait to get together for my 58 in tv

[@shaydog9482]

Thanks I was lost tell I seen this got it all ❤ together

[@XxJuNiOrxX714]

Just finished assembling mine. It’s a really sturdy stand. I was really skeptical of how it would hold my 65” but it worked out well. Had a bit of trouble setting up the mounts to the tv since there aren’t really any videos specifying on how to do it plus the instructions aren’t really clear for that part. Overall it’s a really nice stand. Very satisfied. Just hope I assembled and mounted it correctly. Hopefully there aren’t any complications in the near future 😅

[@RealestKhalil]

How did you get the spine to stand up straight & not leaning? Mine spine arrived yesterday & was confused why it was leaning forward & the bottom part is tight.

[@XxJuNiOrxX714]

@@RealestKhalil just make sure everything is facing in the right direction, when I thought I had finished assembling mine I double checked everything and I still had to take a few things apart to make them face how they were supposed to. The spine was straight and sturdy when it was assembled I didn’t have any problems with it, if it is leaning im not sure why but like I said just double check everything and also make sure you add and tighten the hardware exactly how it is supposed to.

[@RealestKhalil]

@@XxJuNiOrxX714 wish I could take a pic & post it on here

[@ronaldhernandez6065]

@@RealestKhalil hey man did you find a solution to the leaning part just set mine up and having the same problem I have a 65 inch tv too and I’m having the leaning problem of the tv as well

[@Avazquez92]

@@ronaldhernandez6065 I’m having this same issue I had to redo it just in case I did something wrong but the spine still leaned forward

[@ozzieperez]

Would a 60” TV be the perfect edge to edge fit? Or is the 55” the perfect fit to not overlap?

[@BIGB347]

I recently bought this same stand last Saturday but in the "ash wood" finish it's a beast and sexy sleek and elegant in my place. surprising how light it is to move it around with ease. I didn't have exact screw driver you used in this video took me a 2 hours and 20 minutes alone to assemble it

[@DarthVader964]

How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well

[@BIGB347]

@@DarthVader964 there not difficult to pop em onto the slots press and hold each one until slide into shelf frame. It’s a bit of a workout popping them onto each shelf for placing each glass shelf

[@shahedimawal9365]

Please can you help how to hang it up

[@BIGB347]

@@shahedimawal9365 floating spine mount?

[@shahedimawal9365]

Yes sir

[@Unkn0wn450]

Thank you for this video! Very informative. I know this was posted couple months ago but if you see this.. Do you know the true dimensions? I plan to buy this but I want to make sure the height is tall enough and the width is wide enough for my needs.

[@vernebaptiste6040]

Good evening Sir....Do you have any video showing where you attached the two wooden end to the metal frame?

[@adriw9835]

LOVED this review!! thank you!!

[@shatterst0rm380]

Thanks for doing this!

[@sheilawhite7894]

Thankyou you are a big help.

[@destressfrlyf843]

This was absolutely handy

[@strasburgboy]

Thank you very much!! Great video!

[@weatherphobia]

We had this same design and one night at 3 AM we heard a sound like a cinder block dropped from 10 feet to the hardwood floor. When we looked, it was our LCD TV 36" laying face down onto the hardwood floor. The top glass shelf did not crack or break, but the metal brackets and sections gave way. It's not repairable, I tried, so we decided no more glass TV stands and no more TV stand type device for more than $150-$199.99. YMMV

[@PassportBrosBusinessClass]

You must’ve made some kind of mistake building it. My mothers stand is still going strong since I made this video building it.

[@kingeleven3820]

How much did your tv weight? Im thinking about getting one these for my 55 tv but it weights 60 lbs im afraid in the long run the glass will break or the tube holding all weight will break the glass from all the pressure

[@weatherphobia]

@@kingeleven3820 Mine weighed 23 pounds.

[@weatherphobia]

FORGOT TO ADD: Even during/after the shelf collapse, not a single piece of glass from any shelf broke. I found that to be impossible, but it was true. The metal parts failed.

[@IgnorantPrince]

My dude sounds like Keith Lee from WWE! Lol but good stuff bro..imma set mine up tonight

[@Hsw_wrestling]

Bask in his glory!

[@jeffhardybaybay2761]

Yo he kinde does

[@ms.bonillas1125]

The only part I'm struggling with is mounting the bracket to the TV helllppp

[@lowk518]

will this fit with a 32 inch tv? before i go out and buy a bigger tv just for this stand i want to make sure if i can just keep my 32 inch.

[@prxncevino8226]

Does it lift the TV up and down?

[@crimsonguardian341]

But how would you take off the angle bars if you want to change out your TV? Please help ?

[@phillipmedina9877]

Kinda nervous to let it lean forward without it being attached to a wall, I have a 65 in, any suggestions?

[@Stormmaniac]

Mine came but the middle shelf don't fit bolts properly did you have this issue? I had to buy a drill to make them fit..

[@Man0War_Loki]

Ok needed to see how much gap the tv was from the glass.. I have this stand but got a larger tv. I'll have to find a workaround. Like the stand too much to get another one

[@MoxOpal86]

I have a 65 inch on it an it does overlap a little but still looks amazing

[@PassportBrosBusinessClass]

Because of the black bezels, it’s acceptable I think.

[@MoxOpal86]

@@PassportBrosBusinessClass maybe but the overlapping really isn’t an issue at all the tv sits pretty far back on the stand so it almost looks mounted to the wall so the overlap isn’t really an issue the issue is the sturdiness of a stand that’s the only thing that needs to be looked at first wich this stand is very sturdy

[@DarthVader964]

How did you get the suction cups on? They're terribly hard to put in. I put in some with a lighter but it's not working well

[@MoxOpal86]

@@DarthVader964 some of them were easy but some were a pain but i got out a little screwdriver and kinda went around the part you push in the hole and pushed them in and worked just fine

[@shekilrose1077]

I have this exact tv stand you can adjust the tv stand too extend too come out some more I have a 65 inch tv

[@joshlayman7217]

I bought a 50 inch 4k Vizio Smart Cast tv at Walmart and the only tv stands they have is this one.

[@JC-bl9bo]

Hello I just watched your video, very informative. Even though I'm buying a 75 inch TV I think this will for the bill. The legs are only 25.9 inches apart. And it only weighs 79 pounds. I know it will overlap the sides but I'm ok with that. What do you think?

[@PassportBrosBusinessClass]

I don’t want too much overlap

[@JC-bl9bo]

@@PassportBrosBusinessClass Thanks for the reply. I would be ok with the overhang. How easy or hard was it to put together? I am not the best at building stuff but it looked somewhat easy to install. Thanks again for the reply.

[@shekilrose1077]

@@PassportBrosBusinessClass Whalen is a good tv stand for 65 inch tv or 50 inch TVs or 55 inch TVs I have two 65 inch TVs

[@lalow8949]

I just got a 75 inch tv but im having an issue with the tv tilting forward, is it to heavy? Did you have this issue

[@JC-bl9bo]

@@lalow8949 no, i did not have an issue with the TV leaning forward. What TV is this?

[@charlotteespenido-pledger6334]

What screw did u use to mount the tv

[@philiplopez4383]

I just got this a few days ago and when I tried setting up the middle part one of the screws wouldn't go in all the way even though it was the right one

[@iZack187]

The television looks pretty close to the top shelf... Is it possible to raise the TV even higher than that? I would assume a 65-70" TV would be larger in height

[@dbssanchez11]

yeah there are 4 mounting options for the height of the television, it looks like he has his on the lowest setting. I have my 55 inch on the second lowest setting and it fits a center channel speaker underneath it without issue. Source: I just set up mine.

[@AdamAnalytical]

Great video! In inches what is the highet for each of the two interior shelves?

[@mahoganywalker5122]

Dude I feel so cheated i paid 180 but it was worth it thanks for the vid

[@leahdavis9133]

I have the same model assembled myself struggling with a tilt issue tv falls forward …

[@thatssoe1269]

I’m glad that you upload this video, because I’m a woman. & I like to see videos that could help. I’m a visual person lol so thank you so much for this video.

[@boico123]

How many inch tv you put on?? Is fit good

[@joanimal_1]

Mine won’t tilt! How did you get yours to TILT? Mine will swivel but won’t tilt. Even when I loosen the twist knobs. Won’t tilt

[@CRE8LSM]

does anyone know where I would get a replacement for the wall mount? all the wall mounts online are only for well... walls. cannot find any that wrap around the pole of the tv stand... I really need one

[@JohnAranita]

The instructions say that if you have difficulty installing the suction cups to use the provided hex wrench. That took a long time. I used the side of a wrench to pressure the suction cups through the metal shelves. That worked super fast!!!

[@trishcook5002]

After struggling putting 1/2 of them in, I used my forehead sweat on the suction cup nubbings & they just popped in after that! 😆 Works great!

[@Vanessa47912]

I had to use one of the smallest screw drivers in my tool set to help guide the lip of the suction cup in....worked like a charm! I used the 2.5x40mm screw driver.

[@jessicafletcher6962]

What size bolts did you use for the brackets at the back of the tv? I’m having trouble mounting mine in the spine

[@PassportBrosBusinessClass]

Everything I used came in the package. I think I tested 2 sets till I came up with the right size.

[@MarienMarcus]

You skipped the whole presentation!

[@kuteshellz]

Same thing I said, did the work then video after🤦🏽‍♀️

[@PassportBrosBusinessClass]

I think you mistake a Set-up-guide for a REVIEW

[@cj24000]

Lol

[@LB-lx8iq]

Can you put a gaming monitor aoc 34 in g2 series on that mount?

[@johnnyseales8883]

You got that straight

[@GetSocialButterfly]

First started watching this review I was kind of skeptical. I definitely have to say, that is the most beautiful tv stand that I have ever seen.

[@PassportBrosBusinessClass]

If everything goes well, I may do another one with an 80" TV and stand.

[@GetSocialButterfly]

Great can’t wait to see the review on that one. Governor just said no more elective surgeries in Harris County Texas because of big spike in C-19 cases. They are starting to shut it all down again.

[@shekilrose1077]

@@PassportBrosBusinessClass I have 2 LG NanoCell 90 Series 2020 65 inch Class 4K Smart UHD NanoCell TVS w/ AI ThinQ® (64.5'' Diag) i also have 2 Whalen Xavier 3-in-1 TV Stand for TVs up to 70", with 3 Display Options for Flat Screens, Black with Silver Accents i both have them on the floater mount without any problems at all the floater mount is really good on 65 inch TVs.

[@mmartinez3619]

Good vid, thank you

[@y2k_cage8]

I have no clue if you will respond but did you have to put in the black fittings inside the tv? Or no? Because I have my 65” but the spacers that’s supposed to go inside out to big so wondering if you used them or just screwed in the bolt that fits

[@PassportBrosBusinessClass]

Different TV have different fitting requirements.

[@donnellgaither5189]

Good morning how do you get the bar to line up

[@kingeleven3820]

Can this hold a 60 lbs tv with the tv mount?

[@marquesterry3585]

I have no idea which screw to use to place on the back my TV to mount to the stand. Confused is not even the word lol

[@ifye2412]

Went out n got the same exact one

[@californiamade5608]

What do we do if we don’t have the washers

[@victoriapennington1661]

My problem is HOW to get the bottom screw in the brackets on TV. The hook covers the bottom hole for screw.Help!!!

[@rosrose6014]

Like ya video good one man

[@jennyjones9378]

U can adjusted the shelfs

[@simmikaur1800]

Can you tell me how to fix tv position up to down and down to up. My daughter changed the position. My tv is all the way down . I don’t know how to fix it

[@adejohn1937]

Hi do you think he can hold 70 inch TV?

[@truthtimetv4575]

Sounds like a sketch on key and peele. One of peele voices little bit lol

[@NICKMICKGames]

I'm having issues with screwing in the bottom part of the bracket pieces LR&LL on the back of my 50 inch tv. Are the spacers supposed to fit into the hole? The spacers I received don't fit into the hole.

[@misspink54321]

I’m super late to the party, but did you ever figure this out? Having the same issue right now.

[@Phoenix-Rising4]

I had my 55 in on it but upgraded to a 65 in,so I excited and scared to put it on there 🤣🤣 but why did you skip the part the part where you put the bracket on the tv?

[@brandenwatkins1988]

Did you mount it on the wall or stand?

[@user-dr5pe7gx9b]

I had to remove tv because I moved. How do I put it back on.

[@nicholegallo1090]

Just got this stand for my 65 inch, going to do a float mount

[@KevinP32270]

thanks.

[@Steviewonderwhy]

Did you use a restraint strap on tv? To prevent tip over? I don’t feel like using mine

[@PassportBrosBusinessClass]

The TV, as you can see sits away from the wall. a Restraint isn't necessary and we've had NO issues.

[@DarthVader964]

How did you put the suction cups in on the bars? It's literally impossible without melting the suction cups with a lighter

[@PassportBrosBusinessClass]

I pinched em. Didn't have a problem.

[@earlona]

It holds my 70 inch perfectly

[@Quayb24]

How did you get not to lean because mine leans forward and we don’t know what to do.

[@BuGu16]

@@Quayb24 me too it’s so annoying it kept leaning forward so I didn’t use it . I’m scare I’ll damage my tv

[@Quayb24]

@@BuGu16 mine still leans but it hasn’t fallen or anything so I guess we’re good. I think it’s just the weight of the TV

[@Itscjayjames]

My tv keeps leaning forward which I don’t like. Any help?

[@humbertogutierrez9300]

Does this work on a 43 inch tv

[@Quayb24]

Mine is tipping over and we have a 65 inch

[@DrAvery-lc6bs]

I actually prefer the TV wider than the stand - seems more proportional. but it's a good detail to know about the width. I'm mounting a 65, and hoping I can get away without the the wall anchor.

[@PassportBrosBusinessClass]

I don't like the idea of anything tipping over.

[@lalasimonee]

How did the 65 inch look on the stand

[@BoogieDownProduction]

@@PassportBrosBusinessClass no reason it would tip over, even a 75" would be fine if you don't mind how it looks

[@mmll25]

got it discounted at 77USD, couldnt say no to that price

[@RealestKhalil]

I brought mine yesterday for some reason the spine part keeps leaning forward I dont know you gotten it to stand up straight

[@PassportBrosBusinessClass]

That shouldn't happen. Are you sure you tightened it correctly?

[@RealestKhalil]

@@PassportBrosBusinessClass I'm pretty sure I did I spent all day yesterday trying to make the spine straight only thing it does just leans forward.

[@Diana-uk8ql]

Oh so it’s not just mines that does that. Ended up just taking it apart and requested a refund and return.

[@akyawilk11]

Is the spine supposed to lean forward? I don’t know 🤷🏾‍♀️ if mine is put together correctly bc the spine leans forward a bit.

[@PassportBrosBusinessClass]

No

[@kevoggtm9162]

where can i get the brackets i be tryin to find them for so long

[@Redsfreak19]

They're in a box within the box. My swivel joint was taped to the outside of the box.

[@vanessawingfield5791]

The screws are the short for my 55 inch

[@teezyfbaby252]

How do I get the actual tv onto the spine? I have everything put together but still having trouble figuring out how to place the tv

[@teezyfbaby252]

Nevermind figured it out! Thanks. I had the plate on backwards lol

[@jaymenplan4677]

How did you guys figure out what size screws to use for the brackets?

[@PassportBrosBusinessClass]

trial and error

[@RavenHutchens]

Yes but you skipped the whole process. We didn't get a book with ours.. I was looking for a step by step 😢

[@PassportBrosBusinessClass]

@@RavenHutchens Review is not the same thing as unboxing and assembly

[@ARMY14jm]

How long did it take to get it fully set up?

[@PassportBrosBusinessClass]

1 hour

[@skurgeI]

What are the measurements?

[@ms.rolltide256]

I bought this last nite for my new 65 inch I bought last nite to watch Alabama play and Bama beat Fury 🙄 saying all of this to say I put it together but had to watch my tv on my floor because the brackets wouldn’t mount to my tv the Vizio 65 inch ugh

[@DaRTHGTeR]

No help bro. The fact that you skipped over the actual mounting of the hooks to the tv just sucks.

[@PassportBrosBusinessClass]

Read the Goddamn manual

[@timi3402]

@@PassportBrosBusinessClass the attitude was so unnecessary. Would never subscribe to you

[@Petwayboy]

@@timi3402 on god

[@ashleyhaley6322]

What kind of screwdriver do I need? A particular size?

[@PassportBrosBusinessClass]

A standard Phillips, Flat, Hex screwdriver is enough

[@brandoncox494]

What did u use to screw the monitor brackets on

[@PassportBrosBusinessClass]

Brandon Cox I think I just used my torque screwdriver

[@desarae4128]

how do you tilt the tv forward? my stand isn’t tilting

[@PassportBrosBusinessClass]

loosen the tilt lever.

[@AlbireoOkami]

What Vesa standards does this stand work with? I can't find this info anywhere.

[@PassportBrosBusinessClass]

It’s pretty much universal.

[@AlbireoOkami]

@@PassportBrosBusinessClass any way you can confirm i can mount a 200 x 200 vesa standard? I'm worried there is not enough gap to mount the TV center. About 6.5 inches between mounting bars

[@FIGHTINGGAMER]

Does anyone know if you can remove middle shelf I need more room

[@PassportBrosBusinessClass]

No

[@ChrisM0D]

Do you know if this can support a 65in Curve TV??

[@Redsfreak19]

The instructions say that it can. Slightly different bracketing procedures though.

[@MagicChuckNorris]

Can Wires go thru the neck of the stand to hide the wires in cable management

[@PassportBrosBusinessClass]

yes I showed you

[@MagicChuckNorris]

Awesome !!!! Thank you

[@JoEs_Do9]

Personally, I think the TV should be up higher versus lower to the table

[@Bingas_]

I can’t get the suction cups into the holes for the shelves...any tips pls??

[@PassportBrosBusinessClass]

Push them with thumb force

[@trishcook5002]

Forehead sweat on the part that goes in the hole! Bam! They go right in.

[@darkinsanity98473]

Do you know what VESA Mounting patters this stand supports?

[@makavelithedon2369]

Hello, My tv keeps tilting. Any suggestions?

[@PassportBrosBusinessClass]

Tighten the swivel

[@ghettogunsmith7989]

Have you seen the side tables for the side?

[@PassportBrosBusinessClass]

They make a shelf. I haven’t seen side tables

[@mannygonzalez7987]

I have the same tv stand. But I lost the spine bolts to mount on on the spine. 😭

[@PassportBrosBusinessClass]

Hardware store