Bihari Fader Box PT01S

Installation guide for Bihari Fader Box PT01S.
webshop: bihari.bigcartel.com
Beats by Lord Lorenz, Hanzee
Introducing Bihari Fader Box PT01
Works with PT01 Scratch and most portable faders on market!
Tested with
- JDDX2RS-A (contactless)
- JDDX2RS
- MAGNETO NCF V2.1 (contactless)
- Original PT01 Scratch Switch
Features
No need to cut or solder a single wire to install.
Left fader hand DJs, forget the awkwardly angled turntable!
Not just for left fader hand DJs, you can use your favorite fader as an external fader and place a Start Stop Button into original fader hole.
No need to charge, no batteries needed!
Use with a single audio cable (included)
Rotate the fader 0°, 45° and 90° degrees on both sides.
Use on the left or right side of turntable.
You can still play 12” records.
You can still use the stereo inputs and outputs on your PT01S.
Practice with your opposite hand.
Durable 300g, black anodised aluminium design.
1/4”-20 threads, so you can attach to any camera or tripod mount (gopro, etc)
Super stable, non-slip rubber feets.
You can keep your eyes on the fader trough the transparent red bottom plate.
At last but not least, use the super dope shockproof packaging as a case!
Whats in the box
Bihari Fader Box PT01S
Black aluminium faderplate
Easy install cable
4 poles 0.5m audio cable.
(Use the fader box only with 4 poles audio cable)
Original Bihari Sticker
Accessories (sold separately)
- Color aluminimum faderplates
- BFB Side Mount for PT01S
(You need this if you want to attach the Fader Box onto your PT01 Scratch turntable)
- BFB Y-cable for PT01S
(use two faders at the same time)
- Start Stop Button
(replace the original fader with a dope 30mm arcade button)
- Blank fader plate
(You need this if you want to hide the original fader hole)

[@okeefo]

How to set up a dual fader box, left and right as shown ?

[@okeefo]

Ahh I see there is y cable included. BFB Y-cable for PT01S

[@BihariDesigns]

You need the BFB y-cable from the shop. You can use two faders at ths same time! Killer Combo!

[@pedroewert143]

Can i use this fader with another turntable? I would want to go Phono Out->Phono Preamp->RCA Out in to this Fader Box->to Speakers/recording device

[@BihariDesigns]

Nope, this is only for built in faders. Needs a VC+ also. PT01 Scratch or SPiN, you need to add power for the faders.

[@JKtheDJDJJK]

How much for the fader? Also I didn't see any wiring to the stop and start button, did I miss something?

[@BihariDesigns]

Fader is $69. Bihari Start Stop mod here: kzbin.info/www/bejne/gWm8opR3lMekfpo

[@rhyskrause7178]

Hi, does the sound cut off at both ends of the fader ?

[@BihariDesigns]

you can choose from 3 options: both sides, regular or hamster.