Billy Vs Beater Bomb Grudge Race GONE WRONG, CRASHED My Nova

--------------------------------------------------------------------------------------------------------------------------
Shop SRC Merchandise:
www.streetraci...
Instagram: @streetracingchannel
Support the Channel: / @streetracingchannel
---------------------------------------------------------------------------------------------------------------------------
Check Out Our Sponsors:
Stripper Glitter Traction Compound
www.strippergl...
Stinger Race Fuels:
www.stingerrace...
Click Find a Dealer, Then Check the Stinger Race Fuel Box, Check the Street Racing Channel Box when asked how did you hear about us!
Weld Tables:
weldtables.com
Hot Shot's Secret:
www.hotshotsec...
Vickers Performance Transmissions:
[phone]
11152 Bandy Rd, Alliance, OH 44601
Optic Armor:
www.opticarmorw...
Hughes Performance:
www.hughesperfo...

[@StreetRacingChannel]

Make sure y’all watch the entire video or at least see what happened at the end. It’s not what you would expect to cause a hole in the oil pan!

[@mikemaccracken3112]

That would have never happened if they welded the mallory into place. So glad you are ok Billy.

[@FarmsVilla]

I always watch to the end. 🤷🏻‍♂️ who doesn’t? 🙄👍🏻

[@kevinAuman1]

Damn brother, glad you're okay! You nailed it when you said that this very well could have cost you your life and nobody is going to man up and take responsibility for the cause of the damage internally it seems so best to just put it behind you and chalk it up as a learning experience so that next time you will know better and remember this is racing like Tommy said shit does happen but it's how you recover from it and learn from that makes a great racer!

[@chrisvercher4325]

Friday nights last pass was insanely Fast....... I watched every pass Friday night and only Brent Self was running as fast as you where.... Man the car was freaking amazing with that 29 on it...... Can't wait to see you get it all fixed and back out, but you have a winner in the back up position as well... Bring out the S10!!!!!! Hopefully the Nova is fixed by Oct 8th..... That's a tall order, but if anyone can get it done its the SRC Team...... Hope Big Rob and Kenny make it to I29......

[@jimmythomas611]

I'm glad your not going back to box performance,and appreciate how you stated they could have taken your life with that mess they sold you,uncle Bob will fix it I suspect..

[@AdamHolder007]

I almost cried when the old man said I love you no matter what I’m proud of you son I’m 31 and I lost my dad 4 months ago to cancer and I would give anything to hear him say that to me y’all are great and enjoy every minute you have with ur old man I wish y’all the best of luck

[@jeremiahsilver9483]

I am also 31 and also lost my dad to liver cancer. And i dearly miss him. But I think that's why I like this channel so much is the family relationship.

[@frankkatsenis3812]

@@jeremiahsilver9483 yea, my dad gave me his car and he used to say I love your to all the time before I made a pass. He died couple years back. I love watching them drive to the track and prepare it reminds me of those times.

[@Slicpimp420]

❤️

[@creeker219]

Facts I get emotional sometimes watching these guys because I lost my dad at 23 to cancer. I’m 33 now and never gets easier imo. I love this channel because my dad and I were tight and used to race and do everything together.

[@hotrod500hp]

sorry for the loss. keep memories alive to get through it.

[@CICWSfirearms]

A lot of the old school guys I hang out with complain about all the no-prep racers, but let me say I have never seen more stand-up people than your family and now Mr. BeaterBomb has gained a new fan as well. You will bounce back better.

[@najiasobaai4300]

Hello, Bonjour. I'm agree with you, & when I saw All People at the stand, there were Vibes on my body. Very Good Sensation. And Yes, Billy is Billy with positive attitude. Your Comment is Very Good. Farid F²oCarré74 🇨🇵 🇲🇦 From France Peace ✌🏽. Good Continuation

[@calvincandie5344]

Why do they complain about no prep racing?

[@donaldgminski8621]

@@calvincandie5344 because old people have always bitched about whatever the new thing is.

[@jarredtmiller]

So I’m Guessing beater bomb jumped or red lite technically or what made him not take off was just curious either way good thing he didn’t take off that could have been way worse two genuine dudes that know the game you will get er back to prime Billy glad your ok

[@micaharies]

@@calvincandie5344 i have no idea, they tend to literally just say it’s ruining drag racing and call it gay lol. it’s almost always older bracket racers.

[@rast4man]

Damn, when your dad said "Win or lose I'm proud of you son", that was a moment. Envious of your dad's support but so glad you have it. Good job dad.

[@rollandsaxton]

That hit me in the feels. I remember when my son used to race bmx I always hugged him and told him how proud of him I was win or lose before every race.

[@rast4man]

@@rollandsaxton Good dad you are! Be proud of yourself, also.

[@johnunruh1086]

From Steve Morris article If we have to add weight, we don’t simply add on metal or weld pieces on - that’s a lower-end way of doing things. What we always do is we simulate what weight needs to be added to the crank using a bolt at first.” When adding weight to the crankshaft, you use what is called mallory metal, which is quite a bit heavier than the steel of the counterweights. When adding mallory, you should always press it into the side of the crankshaft counterweight rather than the top.  “Pressing it into the side makes it impossible for any weight to come out as the crankshaft is rotating around,” Morris says. “If someone were to weld mallory into a hole on the top of the counterweight, a lot times what can happen is it can fly off the crank and shoot through your oil pan, causing oil to drain onto the track and likely sending you into the wall. That’s why if you need to add weight, we always add mallory metal into the side. We even add a little bit of weld to ensure that it will never slide back and forth.”

[@PaulRhodes420]

You could tell Billy was pissed, & rightfully so!! Someone lying could've lead to a devastating ending!! I didn't realize how much I've grown attached to y'all! This really got to me as if it were one of my own kids!! Billy & Tommy are great brothers! I'm proud to be a true fan! Hope to meet someday soon!! Love y'all! Take care!! ✌😎

[@donaldhaire1502]

Paul what part of n.c are you in

[@oldbones9205]

I feel the same; I subbed to the SRC when Billy had 28,000 subscribers and haven't missed an episode since; when I saw the crash, I was more upset than I'd have ever thought possible for a young man whose hand I've never even had the pleasure to shake; you honestly do feel like part of the family. I'm darn near (closer than I want to say) old enough to be the Old Man's, Old man, but every time I queue up an SRC or Old Man's Garge video, I feel like a kid inside once again.

[@BB-rn6so]

There's a bunch of us who have grown close to Billy and his family.

[@moodybluemotorsportsDwneKnos]

Paul I see ya here as well as I am on every episode, on all 3 channels and bros your all correct, he and his family is our family that many of us have always needed in our lives, many ask me how and why I am so attached to this racing family and I do the same very thing all my life and I simply reply, Guys It's just an SRC Thang if I've gotta explain further you'll never understand or know ,,,,, haha

[@glenncase3659]

@@BB-rn6so Yep, I'm part of their Canadian Crew.

[@smjhobbies4527]

I like the way you're handling this situation Billy with a positive attitude. That's very good that shows that you're a really smart and well put together young man

[@marvincox1712]

My thoughts also 😏

[@mikeoxlong9537]

Bill hasnt blown up lately Should be due for one before too long

[@Gbodyshuffle]

I’m just gonna go ahead and say this I watch all 3 channels the bond of bill and billy is amazing .. to hear his dad say no matter what happens he proud of his son jus hits me right in the feels

[@LucoreAuto]

So glad you are ok. Heart breaking what happened but the car will be fixable and you'll be back in the saddle of that monster once again. We're just very very glad you are ok. Let us know how we can help! That shot of you backing up the truck and trailer at the end to leave the track... oh that got us in the feels :(

[@chetseliga1737]

Same here... make a great poster...I'd buy one or 2

[@LucoreAuto]

@@chetseliga1737 very much so. Or a shirt

[@hotrod500hp]

it was a strong ending of the outcome. lonely, solemn, yet hopeful. the money raised from auction will raise more money then what a few flashy pieces of steel and chrome cost. keep us posted on the Charity

[@Mightyant-tp3ko]

Lucore top notch bunch

[@Not_Built-Right]

Seeing this was heartbreaking, yet it was also one of the nicest moments I have seen . When Joey aka ( Beater Bomb) came to commiserate Billy not only did he just say how bad he felt about the crash but he provided us with yet another demonstration of how humble that man is by him handing Billy his winnings. This shows us all that there's some absolute giants in the racing game of which he is outstanding in his moral compass others need to take note of Joey. Hopefully Billy will be back real soon providing us fankids old and young with much more entertainment keep kicking huge goals guys much respect to all the SRC critters .

[@Mightyant-tp3ko]

Joey Great Dude without a doubt!!! But he did lose those a bets a bet bumped thru n red light

[@glenclarkchidley3637]

I can’t believe he collected the bet!!! Didn’t make a pass! Pretty classless in my opinion! ( Yes “My Opinion”! )

[@Mightyant-tp3ko]

Billy didn't need to make unfortunately beater bomb redlight n a wins a win n Billy's mind was going a mile a minute he just crashed his car i think if joey didnt go over and pay Billy wouldn't have went looking for him IMO

[@sabre-ub3op]

@@glenclarkchidley3637 he won the bet why wouldn't he collect the winnings...they have their rules and most people stick by them, at the end of the day it's à business their not just doing this for fun

[@glenclarkchidley3637]

@@sabre-ub3op It’s classless in my racing circles! The DQ only counts if you complete the free pass. That race ain’t over!

[@saturndeathsquad]

I love how Billy’s dad says “I love you” and that he’s proud of you no matter what.. That was probably the most wonderful part of the video. It’s just something that I always longed for as a kid. A relationship with my dad. Sorry guys, you’ll bounce back stronger than ever.. 💪🏼

[@cristianbustos4918]

us a father you never stop loving you kids no matter what !!!!!!!!!!!!!!!!

[@johnhornback4698]

I also feel like he holds the spoiler and says a quick prayers as they're getting up on boost? Either way... You have to LOVE Old Man!!!

[@cristianbustos4918]

@@johnhornback4698 bill Prays on every pass ,Parents we need to pray for are kids ,every Day ,and bles are kids every Day

[@johnhornback4698]

@@cristianbustos4918 Absolutely love it.

[@WarJakEnterprises]

1 of the best families I have ever encountered, God bless you always guys!

[@Bobthebuilder.69]

Take the big block to Uncle Bobs!!!! You've had nothing but issues with that motor since it was built and they seemed shady af from the beginning tbh. Glad the nova is ok, looking forward to seeing it soon. Glad you're ok as well BTK

[@brosselot1]

Billy I've been racing for a long time and I sent this video to my old engine builder and he said that no engine builder worth their salt would never balance a crank like that and it's criminal because that could have turned out bad for you. I'm glade your ok.

[@e-racer4673]

Engine builders do it like that all the time. Now I don’t know of anyone who puts it straight up & down in the crank and I’m not sure if that’s how they done it. If they did then that’s stupid as fk! I’ve always balanced mine by drilling through the throw of the crank from front to back or vice versa never up and down because centrifugal force will definitely sling it out.

[@brosselot1]

@@e-racer4673 Yes balancing a crank goes back 100 plus years but you do not add weight to the crank lobe on the edge, you always add it front to back in the lobe. if you watch the video to the end you will see they added weight right next to the hole they drilled to take weight out.

[@mattdehnert67]

Absolutely wild guys. #1: glad you’re safe #2: your whole crew are just class acts and really embody what racers should aspire to be. #3: I gotta say, you carry yourself more professionally and with more character than people twice your age.

[@oscar2b913]

That new camera is amazing! The sound quality is SO much better! So sorry about the car Billy. Glad everyone is ok, that car can be fixed.

[@allanlee5196]

I think I speak for all of us SRC fans, we're thankful you wasn't injured and we'll be here watching,cheering and supporting you. You guys never disappoint making these videos !!! They're awesome !!!

[@Dave_9547]

That is why you TIG weld in the Mallory metal, instead of pressing it in. Balanced a lot of cranks and always welded them in, fail safe.

[@carguy3504]

That big slug should have been in horizontal in the crank not vertical little harder to do but fail safe

[@wormkillerdan6486]

Glad you didn't get hurt Billy! Mallory flying off of crankshafts has been a problem for years with folks that don't know how to properly install it. Kind of knew something was fishy when the car was running after the crash and it still sounded good. I wonder if you could find a reputable frame shop and get a base line check for the car. They could pull the horns back in shape. Can't wait to see that Nova back, its one bad Hot rod. You both need to get some roll bar padding in your cars! Hans device or a horse collar. And get those seatbelts pulled tight....Tommy was pretty loose in that seat! We can replace racecars...... ❤

[@yarrdayarrdayarrda]

It's actually lucky a spectator didn't get beaned with that mallory. BTW an engine diaper or catch tray might have prevented the wreak.

[@54raceman]

Don’t forget the stupid helmet mounted gopro inside a funny car cage

[@billz5780]

Diaper is an absolute must. Surprised they don’t require these guys to have one.

[@Cradletothegrave67]

Glad you guys came out safe !! I’ve been racing and around the drag strip my entire life. Nothing bothers me more than seeing someone hurt, doing what we love. Now you can show the world what “Build back Better” really means !! You guys rock 👍🏻😎

[@procharged67]

At First several months ago I looked at the nova like its a red headed stepchild .. The truck is what sucked us all in ... HOWEVER NOW WE ARE ALL ROOTING FOR THE NOVA ! You will face many defeats in your life Billy ...Never let yourself be defeated brother !

[@joshuarisley8091]

Take her to Bob McVeigh, he always does you guys right, the oil psi situation had me wondering, but im glad you're alright, and great driving billy! Nothing you could do, but you definitely put in valiant effort! You guys will have her back up in no time!

[@davidbacon4115]

Agree 100%! Stick to what you know works and have zero issues with the motor. Bob is the man!

[@THUNDERSTRUCKRACING70]

I've been building racings motors for more than 30 years. When I balance a crank, put Mallory in it, I always tig weld them in on both sides, so this does not happen, in short you need to find a new engine builder.

[@hankclingingsmith8707]

ABSOLUTELY

[@FarmsVilla]

Nothing less than a Steve Morris engine for Billy at this stage. 😁 in for a penny in for a pound is an old saying that springs to mind. He will soon win back the cost of the motor. 👍🏻😊

[@Cent51]

@@FarmsVilla I second that thought, it just one big outlay but it would be a game changer..

[@dolfan1318]

Yep, Mallory in the side of the crankshaft, tig weld on both sides.

[@Sercumference]

Yeah sm would be ideal but that's a tall order

[@robertspears6718]

Box is definitely going to feel this after the number of fans and racers that see and hear about this. Wouldn't have been so bad if they hadn't tried to lie and shun responsibility. Their fault or not should have just said we got you 🤷

[@Mr5speed]

💯 !!!!!

[@MrAlcline]

What were they gonna do, send him a new oil pan?? The damage is done.

[@VTX1029]

Their stupidity could have killed people.

[@karenwall6834]

@@MrAlcline So the engine builders lying about it doesn't concern you at all. News flash they could have offered to fix it at no cost to Billy! They will wish they had before this is over!

[@robertspears6718]

@@MrAlcline For one that crank now has to come out and be rebalanced which is gonna be costly. And yes replace all damaged parts. The amount of business they are gonna lose is going to be a helluva lot more money than the cost of fixing that car.

[@silverback8183]

I'm not kidding,this really makes me wanna cry. All the blood sweet and tears that went into building that! I'm happy you are OK Billy but this is so heartbreaking! I've been watching for years...I'm so sorry your having to deal with this

[@thevintagestitcher2022]

As a Mom of all boys....everything in my being wanted to run down that track to make sure you were OK. So happy you are safe. The car can be fixed. We love the channel not only for the car content, but to watch what amazing men you and Tommy are growing into. God bless.

[@dakotaelms6436]

Broke my heart to see that happen to the src family I’m so glad you’re good and alive billy. The situation with the engine builder is not at all right and definitely shows the company’s true colors. Can’t wait for the re build and can’t wait to see it out again.

[@captjack2112]

Part of all racing and always hate to see it happen.Main thing is no injuries as car can always be fixed. Cheers to you all and best wishes for easy repairs

[@stjoejoe]

Billy put a starter button on each side of the firewall to make setting lash a easy one man job,cheap project to make things easier.🇺🇸

[@wscott238]

Billy, thank God you wasn't hurt first of all. This is an amazing video Tommy is killing it on the editing. I am so impressed with how you handled this entire situation. 💯

[@VetteJunkee]

Despite the unfortunate events. Yall made the best of it and this was one of the best videos. The editing, fan interaction, and moments captured were absolutely awesome.

[@DAVIDMARTIN-tm7nn]

I agree with you billy, I wouldn’t take the engine back either Them trying to pass the buck off to someone else for something that happened in house doesn’t say a whole lot for the company

[@chrisvercher4325]

The other thing with them wanting it back to fix it is so they can cover up anything else that's not correct, and get it fixed before anyone else sees it. I bet Unvle Bob will find more issues as well, it shouldn't be wearing the Rod Bearings again, that's an issue right there that isn't right....

[@yarrdayarrdayarrda]

@@chrisvercher4325 Big power with boost and steel rods is a bad idea as it pounds out the bearings. This is one situation where aluminum rods are the correct part, they act as shock absorbers (still destructible with a bad tune) and won't work the bearings nearly as much. The shitty thing here is the size of the mallory he was holding wouldn't have been necessary if they had installed aluminum rods in the engine from the get go. (rods are much lighter, need less weight in the crank counterweights)

[@uncleremis69]

Not to mention the oil pressure issues from the start. Sorry to say, but I’m sure more engine issues will be found

[@danielgalbraith144]

@@bigboreracing356 there's a lot to be said about your comment but opinions are like a$$holes, everyone has one. When Mallory is installed right it doesn't come out, it's expensive and I'm sure Billy paid for it to be done right. As for the oil pressure issue I'm certain a call was made from the engine builder to run it before he made the decision. On the other hand the decision not to run a diaper is in my opinion neglectful. He's more upset and well within the right to say what he said.

[@freedomfox8183]

@@yarrdayarrdayarrda bs if it's built right... They probably have way too big of a gap in his bearings throughout the engine probably why he has oil issues when it's not brand brand new oil I have a very similar setup that's been in my car for years with just routine maintenance for how much he is pushing it steel rods shouldnt do that.. 17lbs is not alot lmao I run 35-50 lbs depending on track my bearings have 180+ passes at this point still great oil pressure..

[@mitchellracingchannel]

The counter weight problem could have been avoided by some welding by the engine builder. They obviously didn't do a quality check before building the engine

[@DiehardDawgs]

I agree! The engine builder making the situation worse by lying about who balanced the crank instead of taking responsability and keeping a good customer is ignorant and def shows what kinda ppl they really are!!

[@jeffvanhorn69]

I'm certainly sorry this happened at all but, someone was definitely watching out for you and Joey both. I'm so happy no one was hurt and the damage isn't worse. Can't believe everyone is denying responsibility with what caused the wreck. I could see the frustration in the video at the end, understandably! God Bless and stay safe.

[@weaverfromtha913]

When mama hugged billy as he got back to the pits I’d be lying if I didn’t tell y’all I teared up ❤️ super glad your well billy! We stand behind SRC no matter what!!

[@artgregory]

Killer freakn video fellas, I am very impressed with how calm you were Billy after the crash! You definitely know what you are doing and definitely were you are supposed to be in life my friend! Keep up the great work! Much love from Ky!

[@freedomfox8183]

After seeing all that oil it dumped on your tires I'm glad you saved it the best you could .. at least you didn't have a $5,000 paint job wiped out as well

[@dirtracingfan8742]

And the hood wasn’t on as well so a little bit more money saved

[@freedomfox8183]

@SNAKE RADIO CUSTOMS yes really surprised box performance didn't step up . Thought they had better business than that.. there's no way around it that's their screw up..if it was someone else they would have pointed the finger there .. they tried blaming Callie's but unfortunately for them Callie's keeps great record on good parts and it was an unweighted crank and than saying maybe it was a different guy and hes dead now is the ultimate cop out and bad business practices... They should have tried to save face and made it right.. imagine if billy was in a totally different situation like you said on the big end

[@hotrod500hp]

unbelievable the fuel cell didnt puke. I may have missed it, does Billy have fire suppression? look at the mercury, He had a much worse day, and all that burned grass. Was the driver ok?

[@freedomfox8183]

@@hotrod500hp he said he was ok

[@orb8176]

Out of everything you gotta really respect what Billy has accomplished for himself, pretty amazing

[@InfamousTactical]

Tough times build tough people. You showed amazing grace and restraint during what you could see was your most devastating moment. Very mature of you. Good job.

[@bigkenny93]

Billy you got ice in your veins, you wrecked and didn't appear shook at all! That's why you're such a good racer, no fear! Good luck getting it put back together!

[@leftlanetrain0289]

BTW broke my heart seeing Billy’s face after the wreck guy put his heart and soul into these cars !! You got this bro keep grinding

[@RealHoosier]

Was awesome being pitted next to y’all this weekend, and see you doing work with that nova! Definitely not how anyone wanted this to turn out. Glad you were safe though man!

[@davidblain2714]

Flat Out Straight Up best video you have ever made! You didn't wreck it buddy, you banged it.... No points for second place!

[@barrybaker6233]

Engine builders recked the Nova

[@davidblain2714]

@@barrybaker6233 Smell that? I'm sure there's a fight coming.... A Life was put in danger due to malice.

[@barrybaker6233]

Your absolutely right. I can't wait to hear from the Old Man. Bet he's got a month full.

[@barrybaker6233]

Mouth full.

[@augie-dawgiewright3798]

He didn't "wreck it" -- He didn't6 "bump it" -- He just slightly "scuffed it a tiny bit", that's all....

[@poppasmurf1969]

Best thing is you came through. Anything material can be replaced and I think I speak for many that have followed you for years doesn't matter what your in we subscribe for you and your family. The drive and effort y'all put in everything, accepting defeat and charge back harder next time are values that seem to be fading away these days. Keep up the good work and as usual can't wait for the next great video.

[@mattbowden1139]

I always stay for the B roll at the end. Outstanding editing as always. Look forward to yall taking us through repairs and steps to improve the next iteration.

[@esotericgarage8091]

You handled that like a man. You stayed positive and it will only lead to great things. I’m glad you are ok. The car will be even better once completed again. 💪🏻💪🏻💪🏻

[@chrislovett1637]

My heart breaks for you Billy, seeing that car hit the wall sucks. I’m glad it wasn’t any worse. I can’t believe Box Performance would lie like that. In a business like that it sure won’t sit well. Shame on them. Also who’s ever idea it was to take the shot of the truck and trailer pulling away with the busted up front end sitting there was an amazing yet somber shot. Nice job.

[@WarJakEnterprises]

Several people have dumped bad reviews on their Google page.

[@carguycarson]

Billy handled the wreck way better than I would have. I probably would've tried to send my helmet through the windshield or across the track. Glad you guys are alright. Hope to see it up and running soonish

[@jimdriscoll5146]

Thank God it wasn't worse than it was. Billy, you showed a lot of class in the way you handled the whole situation. You are a winner.

[@FnGbodyJeff]

Keep diggin brother. Your gonna have some bad luck along the way. Y’all and a few other car folks are what keep me pushing with my stuff. Thank you for everything y’all do. Looking forward to all the content.

[@jeffmonroe9766]

Thank God for red lights !!! Beaters mistake saved both of you. Could've been a lot worse . The tins can be replaced. But you can't. Love this channel!!!!

[@mkgarage510]

Good by to that engine builder for sure. That is a amazing camera shot of the oil pan and oil spray. God job to whoever it was

[@gulfcoastedc7803]

I wanted to cry for you bud. We all know how much work and love went into this car. Glad you're ok you just gotta "Build Back Better" lmao. Sorry, had to do it FJB

[@Rockyxplore]

FJB for sure!!!!... but gotta say that was a good quip!

[@316automotive]

McVey ftw.... never seen an engine he built do anything like this. He'll you and the old man can do it too. Rally up!!!!!!! Heads up. Be safe and fast!!!!! Great edit Tommy and Allison.

[@brett7418]

You’ve come along way Billy and the whole src family and team!!! Who would’ve thought Billy and beater bomb would’ve raced 2-3 years ago hahah goals

[@1clean55]

Man thru the chaos .It’s truly amazing to see the support that you have from all the fans !! Minor setback for a major comeback brother!!

[@jonathoncouchey7151]

For the highest performance engines have the Mallory put into the side. Or have the crank lathe balanced, much more precise, and you won't have to worry about crank Mallory issues.

[@teemukuikka7100]

Mallory is ok as long as it is TIG brazed and not going anywhere.

[@crankshaftsfuels6445]

Box performance should be paying for the damage hands down

[@bobmcalister2131]

BINGO Glad you are doing well!!! When you picked the engine up and they told you that you adjust the valves different on a big block than a small block lol I was worried about the rest of the engine !

[@tonyroddenberry5521]

I just really effin love your channel and all the love of the family and fans .. it’s truly inspiring and it’s motivating me to do what I love to do .. I know youll get it back right again .. keep up the good work and positive vibes .

[@alvaradotowing23]

Beater Bomb…”I do dumb shit all the time”Billy…”me too” glad you’re ok bro, can’t wait to see your come back with the Nova.

[@civicbattlefieldgaming1501]

Glad you’re safe even though it sucks to wreck your car over a malfunction or over someone’s poor mistakes of building a engine keep the videos coming try to stay positive keep the Lord at your heart and keep what you love to do and never give up

[@jonathanlawson4667]

Engine had oil pressure issues from day 1 that should've been the first sign that a 30k Engine shouldn't have those issues

[@bradcleveland1815]

@@jonathanlawson4667 Cleetus McFarland high dollar Steve Morris engine had oil pressure issues too. Difference was a Steve come out and fixed the problem. That’s one of the things that separates a good builder from a parts assembler.

[@bradcleveland1815]

@@bigboreracing356 that I can agree with. If it was mine I wouldn’t run it like that it would go back. With that being said the balancing weight had nothing to do with the oil pressure issue. Even if the engine would have been returned and fixed most likely he would have used the same crank and that Mallory bomb would have still been sitting there waiting. Whoever done that crank screwed up, the fact the builder lied about it is not justifiable.

[@ronvogt]

@@bigboreracing356 they lied so why are you sticking up for them

[@dougbradley1568]

Tommy and Allison are killing it, great video, like to see Billy smiling.great family, great video 😎

[@geebeaux]

Billy took that like a MAN. Much respect for rolling with the punches, build the Nova back with upgrades.

[@johnbean1994]

True sportsmanship by beater bomb! He paid the bet as promised! Glad you are ok the motor can be replaced and the car can be fixed! You got this! The good lord was watching over both of you!!!

[@richardtisdale3245]

Wow the engine builder should foot the cost.. if those weights are installed properly it is impossible for that to happen bud... Steve Morris shows how it's done on one of his Steve tech vidoes.... you should think about letting him build you a 540 or at least let him go over that one to make sure it's all as it should be and maybe letting him do his cam package... I'm speaking from experience brother

[@hankclingingsmith8707]

His motors are well past 100k

[@dolfan1318]

Fact. I just watched the Steve Tech video where he goes over crankshaft balancing. Explains what happened to Billy's car practically verbatim, and that video is over seven months old! The guy's amazing.

[@kageworx]

@@dolfan1318 Great spot! Here's the clip from Steve Morris Engines - kzbin.info/www/bejne/npvQmp16jbuBi7c

[@josephperkins5616]

You guys got so good at editing the videos. Good job Tommy Allison Billy. The whole SRC crew

[@sabre-ub3op]

That was hard to see I can't imagine how Billy must feel and especially when it could have been avoided

[@MeandmyXJ99]

This video shows exactly how much self control billy has and shows just how much he and all of SRC has learned!! I love every one of u guys in the SRC family- u guys are the dream family to so many of us, thank u for all the content from all the SRC channels, and we will see billy back in the nova real soon!!! With a engine he can know and trust!!!!!

[@mctoads8230]

Handled that like a true role model. Happy you walk away safe. The fans got your back. Ride or Die with SRC

[@jamesglenn2006]

Crazy stuff SRC, glad everyone was alright. Hopefully the oiling gets solved with another set of eyes looking at the bottom end. Good luck guys. Awesome video 👌👍

[@RonSales]

1. BOXED PERFORMANCE Should man up and put some dollars towards helping you put the car back together since they lied about them not balancing the shaft even though the person passed away it was done in there shop. 2. Yes it could of have been worse if it had of happened further down the track. 3. box the engine up and hold it for a lawsuit if it comes down to it and request a brand new motor from them with the reguards that this one is yours to keep .

[@larrycrocker6165]

Would you really trust another motor from them?

[@kcav5374]

What a Shame! Just when I expected big things form the Nova.... Glad you're okay PS: It was extremely nice gesture from Beater Bomb, just to see that giving a hand to a fellow racer from the competition is what it's really all about!

[@zacwilliams9849]

Damn a crazy series of unfortunate events but was glad to see y’all still enjoyed your weekend and that’s what the sport is all about! First time viewer but I’m here to stay can’t wait to see the rebuild and hopefully the process! Keep your heads up 💪

[@racer193wr]

Good to see a neck brace on Tommy at least.. as you guys get faster maybe consider a hans device. It could save your neck.. Car took a good wack and the tin hides the damage well hopefully its a quick fix and the nova is back at it in quick succession. Fixing it will make awesome content.

[@flakesinyershoe8137]

The whole crowd all sort of moaned in unison and went silent when you wrecked.

[@matthewjackson8707]

You turned a bad situation into an awesome video best wishes to your comeback Billy!!!!!

[@heathcox4944]

Glad your okay, material is replaceable. The ole man has gotta be proud of the composure ya shown considering, I was impressed with how ya handled it. If i've learned anything following you and the family, you'll definitely be back and stronger.

[@johnwilson1794]

It's refreshing to see the genuine respect Joey and Billy have for each other. I hope Billy gets it fixed soon and is back out there.

[@apsfst69]

Amazing Video! I spent 5 years building my 69 nova, I always worried about wrecking it at the track. It was a sbc nitrous car. I recently sold it. I’m living my dream thru your family now. Keep on racing, never give up!

[@andrewreese6257]

You got alot of fans that care about you and your family. This occasion unfortunately didn't work out. But like everyone else has I'm glad you're okay Billy! Glad that the Nova is fixable aswell. Keep your head held high we are all rooting for you and the SRC family, great video Tommy! Also you've got the dream team!

[@jo16ka52]

I think you and Tommy both should think about getting a Hans safety device.

[@432htz3]

Totally agree.

[@theoldbigmoose]

Yes, it is past time.

[@melloyellow9958]

It was so cool to see you guys and even better at the home track! That pass billy made Friday was fast as hell, so cool to see from the big end! Y’all are gonna be on top shortly, keep digging!

[@johnunruh1086]

The quality of your video' s keeps getting better!! Glad you didn't get hurt. Sorry about the engine builder. That's the end of what could have been a successful business, all for lying and not standing behind his work! Just remember you guys are fast! Love you guys!

[@godzilla7148]

The cinematography is getting outstanding! You two could be making some big bucks doing stuff for TV or cinema! The only thing that beats it. Is the love of family that you all clearly have for each other!

[@mikemontgomery7337]

Definitely call Lucore and have Rich look it over . Make sure it's lined up correctly and get his seal of approval !! He's your guy !!

[@geniferteal4178]

39:27 exactly! My first thought! As you rebuild, don't let frustration get you. Think of what could have happened. It could have been much worse with a car next to you. Glad you are ok and the car is mostly fixable. You have a lot more power. Use it wisely. Things harken faster.

[@jasonbickford4283]

I'm glad your ok! That engine had oil problems from the first fire up without pointing fingers or anything I'd find a different engine builder.

[@frankhopkins7032]

Absolutely gut wrenching!!! You and Joey are both alive and safe...That's All that matters at this point! Chit can be repaired and replaced, Lives can't!! You'll be burning up the track again in no time! I'll keep my comments to myself about the crank lol

[@serturbo]

And that’s why they wanted you to send the engine back to them. Not to make it right, but to cover their @ss. Good on you for figuring out what happened and for calling out the BS.

[@billyray8062]

As always the camera and editing work is outstanding!! Tough break throwing that piece of Mallory out of crank that caused the wreck,glad you`re not hurt. The Nova will be back as good as new,I have no doubt.

[@growing420discretely7]

Might wanna watch the whole video. Wasn't a rod

[@donhorner6019]

Smoke some more 420,Billy Ray didn’t say it was a rod.

[@growing420discretely7]

@@donhorner6019 nice edit 🤡, thx for watching the rest of the video. Think I might smoke another, sounds good at the moment.

[@growing420discretely7]

@@donhorner6019 sure he did, until he edited it and watched the rest. Sounds like you're easily tricked.

[@donhorner6019]

Sorry 420,guess that’s what I get for not staying up all night to catch the videos early,I see he edited.

[@TurboNewEdge]

I definitely know the feeling of getting screwed over by an engine builder. Don’t let it discourage you just keep doing what you have been doing.

[@20b3rotordream]

Sucks to see it man but glad you’re all good. It’s not a question of “if” but “when” you’ll wreak racing as much as you do. Keep grinding and we’ll keep watching and waiting for the comeback.

[@leonardlaing6733]

I felt sick when I heard you crashed. The news was travelling almost as fast as your last pass at midnight. Glad your ok. I just want to say you all make a great video. I forget that I’m watching KZbin sometimes. It’s nice to see Rob rolling up his sleeves again. Your surrounded by good people. It’s time for the Nova 2.0

[@georgeriley6996]

To hell with "box performance"!!! Id go back to the guy that gave you all the help and knowledge on the s-10 engine. But thats my opinion of course. Glad to see that you're ok though, Billy. And give tommy 2 guns is killing it on the editing!!!!

[@lancejones6863]

Glad no one was hurt!! Sorry the Nova got beat up but after watching as long as I have am confident you all will overcome. Good luck and God bless!!!!

[@nickrw28]

So basically Box Performance is a joke ? I’ve never seen mallory metal installed in that orientation without tig welding it. Glad you’re okay man

[@Jimmyk63]

All I can say is that if that mallarey plug had gone through the sump bounced off the track and hit a young kid watching from the side would not be good. Box has alot to answer for.

[@Justin-us8iq]

@@Jimmyk63 and yet they are staying quiet shows what kinda clowns they are I hope they take a huge hit from this

[@chrissnaproll26]

The love and support out there is amazing SRC, you guys rock.

[@houstonpeyton]

Taking lemons and making lemonade. End of the video was amazing. Looks like love of SRC is nationwide. 💪🏼

[@brendanbelli8769]

Hey brother tough break I know you busted your ass on that car the most important thing is you’re standing upright I watch Videos every week and I would hate to see something happen to you or anyone else in the family . Here is the good part the comeback . 🔥💥

[@brendanbelli8769]

@@Jsmith9619 lol I saw that that’s what I get for driving and not haven’t spell check on I drive a truck I’ve actually in Ohio tonight Youngstown

[@ericnager2612]

OMG thank ok Billy your not rebuild able

[@barrybaker6233]

Call Steve Morris!!! Like to see a SMX Engine setting in the Nova. Billy Thank God for the way things turned out. Our Lord and Savior was looking out for you and Beater. For Sure. God Bless.