BIM - Revit Site Design 03 Creating Curb l Kerb and Pavement on Contours

[@mikemascaro4301]

Revit can be so disappointing. All these workarounds, for basic topography. You’d think they’d have it figured out by now. Good on you for figuring something out!

[@NonStopLearning101]

thanks for watching

[@nimamousavi3352]

Amazing...

[@NonStopLearning101]

Thank you! Cheers!

[@MrHydyr]

SO FAR... .ONE OF THE GREATEST VIDEOS!!!!!!!! LOVED IT TRULY LOVED IT!!!! SUBSCRIBED & WILL BE WAITING FOR MORE VIDEOS!!!! tHANKS AGAIN!

[@NonStopLearning101]

Thankz for watching hydyr han...') appreciated!

[@lewisfitchie2140]

Is it possible to make so you don't have all those lines or are we stuck with that?

[@carlitosolano2273]

Hi nice video it works but when i section it the roof category is not showing on section view?

[@adrielspencer8962]

Cool video, but how would you hide those lines that come up when the sidewalk is created. I tried to hide this in the visibility settings under the roof category but it doesn't work. Thx!

[@NonStopLearning101]

Thankz for watching, try to use different visual style

[@nourmustafa1048]

man, that was clever! thanks a lot ^^

[@NonStopLearning101]

Thankz for watching nour mustafa.. :)

[@cclsuda3022]

Great work But this isn't working for me. I have the same problem like the other guy: "When I create the mass, even though I get the same warning message, I don't actually have a mass. Since I don't have a mass, I have nothing to map the roof to. I followed everything you did seemingly exactly. Can't figure it out. It's the spot at 1:13 exactly where when I click the green finish check, the top surface doesn't have the orange model inside it." And after that, at 1:22, I couldn`t select anything to create a roof. I try to do the same way that guy is doing, but it didn`t work. Plz help!

[@NonStopLearning101]

thankz for watching... I will check the raw file and if I can send it to you

[@Wyviner]

This isn't working for me. When I create the mass, even though I get the same warning message, I don't actually have a mass. Since I don't have a mass, I have nothing to map the roof to. I followed everything you did seemingly exactly. Can't figure it out. Its the spot at 1:14 exactly where when I click the green finish check, the toposurface doesn't have the orange model inside it. Edit: Nevermind, it did create the mass, but for some reason it's elevated way above the rest of my toposurface.

[@NonStopLearning101]

Thanks for watching Vincent, try to double the "Level"

[@cclsuda3022]

I have an exact same problem! Plz tell me how do u find a solution for that!

[@harryotsuka3157]

@@NonStopLearning101 Changing the level doesn't do anything. I moved it to overlay the isolated element and it still made no difference

[@ioanniszorgianos5299]

Thank you for the video, but the rest of topography is bellow the curb and pavement and if we try to move the topography up, we will move also the road level. So, is there a solution to this?

[@NonStopLearning101]

Thank for watching Ionnis Zorgianos,....;)if I understand your question correctly, no need to move your topography, you just need to create "Level" for your topography on the Elevation. If your using "Toposurface" Adjust your Toposurface Points Elevation to match the Curb and Pavement....good luck!

[@MrHydyr]

Truely questıon ıs wıerdç If I get ıt rıghtö sınce the dwg ıs also lınked to revıt fıle and ıf we lınk CAD ınto revıt ınstead of sımple ınsert, then, whatever changes we make at toposurface, are going to be reflected automatically in file.... But, guessing that it will slow down the whole process....

[@royfrey2556]

I do this but instead of a roof from the mass I want to create a floor from mass but it won't let me select anything when i choose floor from mass - why?

[@NonStopLearning101]

thankz for watching. double check your model and check the properties

[@derfuchs2265]

This is good, but the issue is that your curb/sidewalk doesn't usually sit above grade. Also you did everything way too fast (it's too sped up) and it was hard to follow.

[@NonStopLearning101]

Thanks for watching, you can adjust the playback speed under setting

[@purplezahr]

Great help!! Would be great if you could share the Curb profile link please

[@purplezahr]

Also, while creating pavements after making roads, a lot of these error messages keep coming about sub regions intersecting..any solutions on that?

[@NonStopLearning101]

Thankz for watching D'Silva D'Silva... ;) Kindly give your email address... thankz for the positive commentz!

[@yunusaydn5046]

Could you send me the file email: [e-mail]

[@purplezahr]

It's [e-mail] . Thanks a ton!!

[@NonStopLearning101]

The file was sent @ Yunus Aydin... EnjoY!

[@elizabethbazanavila633]

I noticed you had site designer why did you go about using the method you used versus using site designer?

[@NonStopLearning101]

thankz for watching... you can use both method

[@MarvellonUldaman]

Great Video. Worked great the first time I tried it. Now, every time I import my CAD I get "Import detected no valid elements in the file's Model space. Do you want to import from the Paper space?" When I open the file in AutoCAD there isn't anything there. Seems to be a problem with the export. Anyone else have this problem?

[@NonStopLearning101]

Thanks for watching Species... try to use "LinkCad"..good luck

[@l3utterfish]

Im sure there must be some Dynamo way to create that curb instead of clicking one by one...

[@NonStopLearning101]

yes sure

[@jamiescott1169]

Good video but far too quick passed gave me eye strain

[@NonStopLearning101]

Thankz a lot Jbf Bro for watching. :)

[@NonStopLearning101]

Hi Bro, message here your question, maybe I could help.

[@RemmiKat]

you can change playback speed on youtube videos

[@elizabethbazanavila633]

I like the video, but it was frustrating because it was soooo fast. I kept having to replay, please keep speed in mind when creating turtorials

[@NonStopLearning101]

yes, I will take note on that

[@RUBENDROMEROPAREDES]

No hay una manera mas sencilla de hacer eso? que trabajón...

[@NonStopLearning101]

thanks for watching

[@SN1350]

This video is all about look what I can do. Hardly anybody can follow along.

[@NonStopLearning101]

thankz for watching...

[@MYOWNWITCHKING]

funny coz I had to speed it up by 1.5 so I don't die out of boredom :) Great Video ;)

[@jacobopg]

I LOVE YOU

[@NonStopLearning101]

Glad you liked it

[@ghazinspace]

not compatible with revit 2018

[@harryotsuka3157]

Where did all these additional lines come from, they weren't there in the last video and they weren't part of the import. You need to work on making proper videos,

[@NonStopLearning101]

Thankz for watching

[@superdesignarchrealtime2573]

Too complicated, is not there something simpler and more intuitive?

[@NonStopLearning101]

thankz for watching

[@gregjarvis3288]

Good video, but struggle to keep up. Please slow it down :)

[@NonStopLearning101]

Thankz for watching Greg Jarvis,. ;)

[@vishnuprakash3187]

Hi mate, jus helping. I'd the same prob initially. video can be slowed down on-screen using the settings button

[@emadnadi4603]

I will give a thump up if you were a little bit slower

[@NonStopLearning101]

thankz for watching

[@brahimchert4629]

send profile M_curb.....plz

[@NonStopLearning101]

Thanks for watching Brahim...)

[@damo690]

slow down. no good .cant keep up!