I really appreciate your quote expertise in this controller programming and showing me how to program every setting even though you don't know what the hell it does I haven't gotten that far yet though I'm still emptying the jello out of mine. Thank you
@chuyramirez37314 жыл бұрын
Love you work, nice to see another mechanic
@zoserguerrero5 жыл бұрын
muchas gracias desde Berkeley California
@explrx70404 жыл бұрын
Thank you so much man !! Your really skilled
@sorianosn3 жыл бұрын
Thanks for the info, where did u buy the LCD from?
@PabloEscobar-ky9mh4 жыл бұрын
Thanks for everything 👍 everything is working properly...
@samzone89204 жыл бұрын
good to hear that
@CharlesBronson773 жыл бұрын
Thank you from Paris!
@PraxisImProfil2 жыл бұрын
Hey Sam first of all: thanks for your video and great help, getting the crashed bird work again. But! There’s something wrong with the 3 MotorHall cables (blue, yellow, green). I had to change blue with yellow, otherwise the motor turns backwards. I have the same controller and display, too. Maybe the guys in China had it made on mondays 😁 ?!
@samzone89202 жыл бұрын
next time you just need to do a relearn procedure to change the rotation
@PraxisImProfil2 жыл бұрын
@@samzone8920 Joh Bro 👊🏻 you mean connecting the (green?) learning plugs and just let it run for a minute?
@samzone89202 жыл бұрын
yes
@thecam00735 жыл бұрын
Nice videos. I watched them all. Where did you learn all of your electronics skills?
@samzone89205 жыл бұрын
where i grow up my neighbor was a electronic engineer and show me few trick that was long time i go i was a kid by that time
@zoezaym.t.b.m98513 жыл бұрын
@@samzone8920 I did everything you said on the video but now it’s going in reverse
@elcamaleon.1.035 Жыл бұрын
Hi, thanks for your explanation. I bought the same kit and it worked! but now I have E-10 it doesn't allow me to speed up. If you have the answer please answer me!
@frankgrinwis29828 күн бұрын
Can you send me the wiring diagram for my 590 Segway ES4 and how to connect it with my s866 display. Because I can't find a good diagram on the internet
@michaeljavate16123 жыл бұрын
Bruh your a fuckin genius. Love your tutorial video.
@h.jurgencharne2113 Жыл бұрын
Ysuper
@jimmychafins3 жыл бұрын
I changed the settings on the side THL 5 and now it’s faster but still not correct yet...I’ll keep messing with it
@frankgrinwis298 Жыл бұрын
Can I also ride on it without that controller on my steeringwheel ?
@samzone8920 Жыл бұрын
if you dont want the display on your steering then buy the controller that dont use display
@zoezaym.t.b.m98513 жыл бұрын
I did everything you said and it it’s on reverse only why?
@alejandrogil1803 жыл бұрын
You have to flip the polarity
@alejandrogil1803 жыл бұрын
At computer
@jjmaia2 жыл бұрын
Getting error 9, do you know how to correct? Thank you
@samzone89202 жыл бұрын
Controller failure
@victormongain78464 жыл бұрын
Hello , how are you. I come back to you because I have an E10 error that appears on my LCD I dismount all the scooter but nothing nor made the error E10 continues to appear. it's impossible for me to get in yet everything seems to work
@victormongain78464 жыл бұрын
@@Acavando I dismount the controller everything is ok I do not know what to do the error E10 does not want to remove my LCD screen
@victormongain78464 жыл бұрын
@@Acavando hello, thank you for your answer. But I do not understand what son exactly I must solder ?? I have to weld all the sfils connected to the controller is it? thank you
@Tuta-Mabsuta4 жыл бұрын
I also have the same problem
@SF64Dart4 жыл бұрын
Same problem, any solution?
@philspaseo23772 жыл бұрын
Did you figure it out
@cryptomanu99944 жыл бұрын
Hi sam In your video you set 9 for p13 Is that still the value you use Because in the datasheet they say 5 , 8, 12 if I understand well Thanks for your help once again
@samzone89204 жыл бұрын
use 5 9 is to strong
@cryptomanu99944 жыл бұрын
@@samzone8920 thanks I will try this setting . I'll Let you know
@cryptomanu99944 жыл бұрын
Hi sam I have p13 setting to 5 as you suggested. Ans the motor is less noisy. Thanks But the shut down problem still occurs . Do you have another idea ?
@samzone89204 жыл бұрын
@@cryptomanu9994 at this point the only thing you can do is bypass the bms ground cable but you need to open the battery and is real hard to open that battery i have a video about open that battery is a mess but maybe they help you
@cryptomanu99944 жыл бұрын
@@samzone8920 as I have the same problem with another battery, do you really think this is the source of the issue?
@robm69624 жыл бұрын
What is the speed controller and lcd did you use and where can I source this thanks 🙏
@chris114084 жыл бұрын
Hey I have the same setup just wondering what you do for the brake reminder light that comes on? It stops the scooter when your riding
@PraxisImProfil2 жыл бұрын
Did you fix it? I have the same problem… scooter stops and shuts down on level 5 at maximum power
@jimmychafins3 жыл бұрын
I’ve wired it up and the wheel spins very slow tried it on two and same outcome any ideas
@WDZaphod3 жыл бұрын
Just converted a Bird 590 with this controller, and it behaves strange. Wheel ist always spinning with 2-3 rpm, only in full throttle it stops. When you release the throttle, it spins again. Not top speed, just in a few km/h. Any suggestions? Wiring is fine, throttle is original Bird 590.
@samzone89203 жыл бұрын
recheck all wires connections and then set up the display setting correctly
@WDZaphod3 жыл бұрын
I checked several times, all fine. Motor all colors 1:1, Batt has Bypass and worked, Brake and Throttle are fine. Weird is, that the Speed of the Wheel is always same, only stops when I push throttle. It does 9km/h, never more, never less. Strange…
@samzone89203 жыл бұрын
@@WDZaphod i think you have the throttle cables on the brake and the brake cable on the throttle try switch them and try again
@ayarismartinez51883 жыл бұрын
Hi I've been watching your videos but I can't find what controller to use the link is no longer there
@istrmek4 жыл бұрын
A way to replace only the controller without the mothercard , for bird 590 ?
@jakemassey86374 жыл бұрын
Have you stuck with these settings? If not can you type out the setting you choose for each one. I’ve got mine set just like yours in the video but just wondering if you have played around with different settings and found something that worked better for any reason. If they are different please reply with what yours are now.
@samzone89204 жыл бұрын
there is not much important things to do with those setting my setting are fine
@medshadow13 жыл бұрын
This controller is suitable with hub motor geared ?? Can showing the right speed !!?
@samzone89203 жыл бұрын
Yes they should work thats why they have the 2 wires for relearn procedure to adapt any motor and for the speed accurate you need to set the right parameters
@markonastic42132 жыл бұрын
Hello . I made all the connections as in the video and all part of the display turns on and I set everything as you said in the second video. but after 10 seconds and the display runs out of power and everything stops
@the7gamer104 Жыл бұрын
did you manage to find a method?
@jimmychafins3 жыл бұрын
So everything works but the motor makes a loud grumbling sound on take off...sort of the same sound they make when the motor is bad...I hooked it up to another scooter that made the same sound...not sure if it’s a bad thing or not....speed odometer is p18 not speed limit...if you notice your odometer is saying you are going faster than you are you adjust this down until it matches up with your actual speed
@jimmychafins3 жыл бұрын
After take off and the scooter picks up speed the sound goes away
@samzone89203 жыл бұрын
Thats the phase cable connection that are wrong combination the sound is because the firing order is wrong because the wrong phase cables combination change it on to they work good
@jimmychafins3 жыл бұрын
Which ones are the phase cables...? It only does it on take off but I’ve adjusted the settings and was getting very good speed..I followed your video step by step..
@samzone89203 жыл бұрын
@@jimmychafins big 3 cable from motor and controller
@jimmychafins3 жыл бұрын
Are the phase cables the large 3 that went to motor..?
@supwithvisalia Жыл бұрын
Any idea how to reset forgotten pw?
@samzone8920 Жыл бұрын
yes i have the procedure in my office computer when i have a chance i upload it here
@pietropolles42203 жыл бұрын
have a problem with this display when I turn on this screen appears with 4 0000 and I cannot make it work because I do not know the code can you help me please?
@samzone89203 жыл бұрын
Go ahead and download the manual that i put in the description at the end of the manual they tell you how to remove the password feature
@andreagrande83234 жыл бұрын
Hi I have the same display but unfortunately the parameter P08 (speed limit) flashes but pressing + or - does not change it how can I solve it ??
@samzone89204 жыл бұрын
Dont understand your question
@andreagrande83234 жыл бұрын
samzoneworld the value of P08 remains at 25. Although I press + it only flashes.
@samzone89204 жыл бұрын
Well is supposed to change when you press + or - if they dont do anything most probably is bad those thing are cheap Chinese parts and they came bad very often
@andreagrande83234 жыл бұрын
samzoneworld ok thanks
@davidbesnier52044 жыл бұрын
Hello, a battery of lime can fit in the bird 590?
@samzone89204 жыл бұрын
I dont know
@derlend99283 жыл бұрын
Hello, Thanks for the video Could you share the link for the controller to buy?
@samzone89203 жыл бұрын
if you type electric scooter controller kit on google you will.find a lot of option they all basically the same
@robertochao72962 жыл бұрын
Hola buenas amigo!!!, he conseguido hacer arrancar mi Bird con una bateria de hoverboard, pero me da un error E07, es normal??? He salido a probarlo pero se para a cada rato, en cuanto tiene que hacer algo de fuerza se para de repente... sabes que puede pasar??? Muchas gracias por tu ayuda.
@thechuister40224 жыл бұрын
Lucy you got some explaining to do
@oscarmeza92834 жыл бұрын
Can you tell me what to buy and I’ll se the videos
Thanks, but im in the EU and tryig to buy off aliexpress. Ill cotnact the seller maybe he knows
@mic96122 жыл бұрын
Damn the page was deleted
@davidbesnier52044 жыл бұрын
Bonjour je peut trouver ou ce faisceau svp ?
@derpherpp4 жыл бұрын
Can I use this controller & lcd kit on ninebot max
@samzone89204 жыл бұрын
yes this kit is for any scooter 36v or 48v
@alexisburke45445 жыл бұрын
Why dose wheel spin backwords
@tubefr715 жыл бұрын
Exactly, why does it spin backwards? Help please!
@RotineQue5 жыл бұрын
@@tubefr71 justbridge the learning wires and turn on. google it
@danhtpham5 жыл бұрын
@@RotineQue Self learn is activated by connecting the two green wires on the controller with the power off. Then turn on the power from the LCD panel and the front wheel will move slowly as it detects the phase of the motor. If it turns the wrong way, disconnect and reconnect the green wire with the power on - the wheel will turn the other way. Once it's turning the right way, dont touch anything and let it run for 10 seconds or so, then then turn off the power via the LCD.
@PabloEscobar-ky9mh4 жыл бұрын
Danh Pham does it really work? I’m gonna try in a few minutes.. mine is going backwards too
@danhtpham4 жыл бұрын
Yes
@ssk32044 жыл бұрын
My bird seems to shut down under throttle and there's error "CUR ((!))" On the mph screen. Any advice from anyone?
@samzone89204 жыл бұрын
Need to bypass the bms
@ssk32044 жыл бұрын
@@samzone8920 Got it. Watching your BMS Video. Thank you.
@victormongain78464 жыл бұрын
hello, how are you thanks for this great video I have a problem with the scooter that goes out of the way that I put the speed on 5 will you explain to me why?
@samzone89204 жыл бұрын
you need to bypass the bms
@victormongain78464 жыл бұрын
@@samzone8920 can you explain to me how to bypass it thank you
@victormongain78464 жыл бұрын
hello I do not know if I expressed myself well but my scooter goes off after two minutes is it normal or can you explain me thank you thank you :-)
@victormongain78464 жыл бұрын
BMS
@samzone89204 жыл бұрын
@@victormongain7846 make sure all connection are good and if all is good you need to bypass the bms
@bonryansoriano52574 жыл бұрын
hello there??Im just wondering if you can help me to make lime scooter as personal use ??
@bonryansoriano52574 жыл бұрын
my friend got lime scooter gen3??
@samzone89204 жыл бұрын
@@bonryansoriano5257 just get a 42v 2000 watt kit system and fly with it
@bonryansoriano52574 жыл бұрын
My friend bought seway ninebot control board motherboard kit for kick scooter ninebot es1,2,3 and 4 is this can work??and also got a Bluetooth circuit board hope you can help us ???thanks much;)
@samzone89204 жыл бұрын
@@bonryansoriano5257 and what you want to do with the es4 sytem
@bonryansoriano52574 жыл бұрын
samzoneworld I’m just wondering if it’s gonnna work to replace the system for lime gen3 ??would you mind if I ask you to contact you privately ??its kinda hard to explain everything here, If that’s ok to you?thanks!
@anilobama88413 жыл бұрын
Hey i do it like you in your videos but i got a problem when the scooter stands in the air i can give full throttle but if i step on it after 2 meters it will shut completely off and let it only turn on after i put the charger in whats the problem i hope someone can help me
@samzone89203 жыл бұрын
You need to do a bms bypass
@samzone89203 жыл бұрын
I have a video about that
@anilobama88413 жыл бұрын
Great job thanks bro happy new year from germany👍🏻👍🏻❤️
@anilobama88413 жыл бұрын
@@samzone8920 bro one question left i have the bird 590 from germany and my lights cable are 3 Black white and red where do i have to connect these :)?
@samzone89203 жыл бұрын
@@anilobama8841 those 3 wires are the same for all bird scooter you need to watch the complete video very careful because is all there if not in one video keep searching in my other videos i know is somewhere in those video about how to connect the rear light and also you need a voltage stepdownload
@dannyochoa49514 жыл бұрын
i was riding my scooter and it stopped and it’s not going and E 07 is on display
@samzone89204 жыл бұрын
that code is for motor failure
@darexg4 жыл бұрын
its hall sensor error. check your connections
@PraxisImProfil2 жыл бұрын
@@darexg got the same problem. Had to change blue hall connected to the yellow, otherwise the scooter turns backwards?! But now, got E7 too, scooter works until it reaches maximum power. Any ideas how to fix it? Thanks!
@p0tat0es_nation644 жыл бұрын
Why they aren't any video of bird one review??? There are only stolen bird scooter hacking videos!!!!
@oscarmeza92834 жыл бұрын
Me puede dicir que comprar para serlo porfas
@maksiozadymka45153 жыл бұрын
i forgot my password how to unlock such a displey what can i do for help
@samzone89203 жыл бұрын
i will send you the instructions to fix your problem give me a bit of time
@samzone89203 жыл бұрын
ok so you need to put 3745 and hold the button for 10 second that will do the trick
@damianlaverick11994 жыл бұрын
Whats e 06 ?
@samzone89204 жыл бұрын
battery undervoltage
@GG-eh1en3 жыл бұрын
Don mi nombre es mando soy de oxnard cal. Ocupo su ayuda tego dos scooter bird y no puedo aserlas jalar si quere contactar le pago
@alinehme94254 жыл бұрын
Lol is my bird scooter the only one that drove backwards after wiring it all together???? My shits doin wheelies
@samzone89204 жыл бұрын
You need to do a relearn procedure to fix backward problem
@mikerak74734 жыл бұрын
Where did you get information on the relearn procedure? Same thing I got.
@samzone89204 жыл бұрын
@@mikerak7473 i just figured out onetime i was lost with the backwards problem
@samzone89204 жыл бұрын
You know how to do it?
@mikerak74734 жыл бұрын
@@samzone8920 I dont Sam, I keep going through these conversations as I hate bothering people when the info has been posted somewhere.