Bit Changing Options

[@gremilllion]

This is so exciting. Can't wait for the upgrade path details!

[@JoeLazzara]

Very cool Daniel. 👏👏

[@JasonPeltier]

Most excellent. Cant wait for the initial release! What kind of air setup do you need for this? I have a 60 gallon 100% duty air compressor. But do I need a vacuum pump instead?

[@PwnCNC]

I have a few of these (www.amazon.com/gp/product/B07N528213/) and very happy. No need for a vacuum pump. We've seen the vacuum table products out there and have kicked around the idea, but nothing is being pursued atm. We were just discussing what gallon compressor might be recommended; internally. How many tool changes can you get out of each gallon of compression? We're going to be running some tests to see.

[@aaronb8698]

I totally want this set up

[@Jeff_369]

This is very cool!

[@Hinkleshop]

Love it!! Can’t wait

[@chrispelletier3661]

Wooohoooo🎉

[@jonnyking4369]

What is the yellow digital box on the left side of your masso?

[@PwnCNC]

Referring to that far left yellow box? kzbin.info/www/bejne/f3eynIaQgpl9e9U That's our relocated keypad for our VFD. It's 3 parts... printed keypad holder pwncnc.com/products/vfd-keypad-mount?variant=41952186892427 plus a cat5 cable and special MOS switch relocator wire which are linked at the bottom of that page.

[@LavinWoodworks]

Is it still er20 collect size?

[@PwnCNC]

Correct, ISO20 tool holders are ER20 and fully support any of our ER20 accessories on our website.

[@bobmonday925]

How much craving space do you lose with this design if any?

[@SLCMotor]

I believe another video mentioned 3"

[@Ross401]

I'll say it again, Please just take my money now! I'm sold!

[@aaronb8698]

Would be nice if it could have 10 tool slots in one 3d printed part to mount at back of table.

[@PwnCNC]

For our initial tool-holder/rack design we've come up with these static surface and flush mount designs. Extra tool-holders can be purchased so 10 is easily possible. As for a single mountable rack, it's suggested to mount the individual 3d printed parts in a row on a board, then mount the board onto the bed. Our goal is to accommodate users desired configurations and allow for as much customizability as possible.

[@HansJPfisterer]

YES, I like it!!! Please move on , it looks so simple.....