Black & Decker Angle Grinder unboxing 710W (BEG010)

[@vernonstevens3915]

Thanks for the video just got this angle grinder and looking at the instructions i thought the lugs were missing but found this very informative video and all explained even down to what guard to use, you saved me lots of time, so a very big THANK YOU

[@borgislove564]

Happy to help.

[@eolaleye]

I set this up all wrong beforehand and it was a very scary experience 😢 Thank you for a very good video. The middle flange was particularly important detail

[@jasonsmith902]

Stupid design, why don't they work straight out the box

[@mikeogorman5986]

Thank goodness for this video. It’s been doing my head how to get the (grinding) blade tight. Outer flange is bidirectional. Would never have guessed from the instructions.

[@borgislove564]

Glad I could assist.

[@ragajos]

Brilliant, straight forward how to set up and yes i want to be using it safely 🙂

[@Rog76]

Thanks for the description about the direction of the outer flange having to be one way for cutting and the other way around for grinding. I was wanting confirmation of this as the instructions that came with it are terrible.

[@borgislove564]

Glad the video was helpful

[@samifretterz9558]

I can't get the flanges off just turns and turns when I use the 2 pronged tool

[@jamesolney3456]

Hold the locking button on the other side of the tool

[@michellenelson8440]

@@jamesolney3456 life saver...thank you

[@danielharrhy]

@@jamesolney3456 you legend! Thankyou!!

[@Hustlémon]

​@@jamesolney3456 Thank you!! 🐐

[@JdonaldA]

I push the lock button in (compress) to tighten the outer flange and it does seem to tighten (sort of) but the lock button then comes back out (decompressed). Is the lock button suppose to remain in during use?

[@3383Woody]

Thank you!!!!!

[@badmothertruckeruk3731]

The disc has some movement even when tightened up Is this normal( back and forwards movement)

[@nayanmipun6784]

There is a mild wobbling of wheels with my Black+Decker angle grinder. Can the wobbling be eliminated?

[@borgislove564]

Check the flange, bearings, washers, gears, spindle, and grinding wheel. Refer to your owner's manual. You could also reach out to Black & Decker if you are still stuck. Their link is below. | BLACK+DECKER (blackanddecker.co.uk)

[@karenbrown4935]

Thank you for this video

[@did.panas.]

видео на гране наличия смысла). начиная с плохого освещения нюансов, заканчивая оставшимися после просмотра вопросами, например материал корпуса редуктора (у боша в некоторых моделях начали ставить пластик)...

[@TowedHaulProductions]

what s the disc for cutting aluminium - is there a part number to order - i only hve the 5 discs that came with this machine.. 115x 3.4 x22.23 EN12413 a305bf on the description it says "cutting disc" - confused - what a grinding disc then ? lol HELP

[@borgislove564]

Hi aluminium is a non-ferrous metal. You can purchase discs on amazon that is suitable for both ferrous and non-ferrous metals.

[@borgislove564]

Just search for metal cutting disc and make sure to get one that is suitable for non-ferrous metals. If your not sure maybe try calling Black & Decker.

[@whitevanman6883]

what's with the gloves?

[@borgislove564]

Always remember your PPE when working with dangerous equipment.

[@whitevanman6883]

@@borgislove564 'nuff said

[@maxrome67]

I personally wouldn't wear gloves with this its not going to protect you if your fingers or hand get caught in the grinder is it...

[@paddingtonsnare987]

Its a tool for cutting metal with ease. I doubt gloves will hold up much of a fight 💀

[@sabinocinquepalmi9853]

Dove posso trovate pezzi di ricambi flessibile angolare

[@MuhammadArif-tk2vu]

Black & dacker grinder ki Quality achchi nahi hai

[@jasonsmith902]

Stupid design, never buy

[@stephenprivate8087]

not much use quiet

[@jonydory622]

Made in China . I didn’t know before buying it off Amazon. A shame