Black & Decker LDX120c Review - 20 Volt Lithium-ion Cordless Drill/driver

[@brucefleming3309]

Upgraded from an older 18v kit. kzbin.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

[@macelius]

Great little drill, has served me well for almost ten years and still going strong, built a shed, decks, walls, drilled countless holes and installed countless fasteners. Just picked up the BDCI20C from Sears for automotive work and the spare battery.

[@Reviewlamp]

+macelius Thanks for your comment. Please subscribe

[@עמוסקצנטיני-ב9ש]

macelius aeg

[@glennellis1391]

We where at a job site in Cincy and my favorite DeWalt drill died on me, there was a Walmart, about a mile away and I bought one of these to get by. To my surprise I am still using it, its not a commercial drill by any means, but around the house it would be fine!

[@waynerhea6649]

This drill is perfect for what we use it for we put together patio furniture a dinning room set 2 benches a chair hung pictures hung 6 curtains and build a coustom closet which has 4 side shelves one cabinet and a shoe rack all this and we had no problems with it also we didn't run into over heating problems and never lacked the power to drill 1/4 pilot holes in some wall studs.

[@Reviewlamp]

+Wayne Rhea Thank you for the informative comment. I love yo hear from folks who use products in real-world conditions.

[@littogether700]

I have two of them. use them daily to fix boards and such on our horse rescue. Currently using them them as the main tool to build a 10 stall barn. I also have several other black and decker yard tools that use the same batteries. Definitely not designed for professional/trade use, but they are holding up well after several years of service. Amazed at their durability. Much better than Harbor Freight stuff. Have two so that I can have one in the barn and one in the house. Batteries are decent, but you will need several to get anything other than usual household tasks done, but they are cheap enough, and there are generic types with more power that are sold on amazon. Haven't needed to order any of them. When I run down 2 or 3 batteries, its a sign for me to take a break anyway. Doesn't take that long for them to recharge. They are cheap enough that it won't ruin my day if they die. So far, they are going strong. Comfortable in the hand. Definitely a winner. Great value.

[@SaadRahimu]

It would have been nice to show how to use different attachments with the drill because the instructions manual doesn’t cover that.

[@MARYA-ie8mt]

Hi, I purchased the Black & Decker 20V Max BCD702 similar to what you have demonstrated. I am new to power tools, how do I attach the screw tips?

[@caimancai5110]

works for little holes in a concrete?¿

[@vivesanta3026]

Really professional and gets to the point! I love it, please make more videos.

[@Reviewlamp]

Thanks, Matt!

[@souhailyachaoui1578]

BLACK+DECKER LDX120C 20V Max Lithium-Ion Cordless Drill-driver

[@joethomas1146]

excellent 4 minute review, thanks.

[@moggridge1]

Always like the varied types of equipment you review.

[@Reviewlamp]

+Moggridge Thank you very much for that thoughtful comment

[@geraldpatrick9463]

I have a Black + Decker 20V matrix drill driver with four attachment heads. I also have B + D Weed Wacker and a B + D Pole saw. All use the same batteries. I have four 1.5 Ah batteries and two 6 Ah batteries. I find that for most jobs, the Matrix does fine with the 1.5 Ah battery, while the other two, due to the extended use time I need the 6 Ah batteries. I'm planning to build a 8 x 12 foot shed with a gable roof. I'll need to pick up either another B + D drill driver or impact driver so that I can drill pilot holes and then drive fasteners with out changing head on the Matrix. I suspect that I'll also use the 6 Ah batteries in them. I may need to pick up a couple more so that if I work a long day, I'll have plenty of battery power. Over all, I'm quite pleased with my B + D tools.

[@Reviewlamp]

Thanks for the comment. Please consider subscribing

[@ravisingh1285]

what is life of battery?

[@KhALe26.]

Can I ask if how to remove screw? Thank you in advance.. 😊

[@eemoogee160]

I hope you were able to remove the screw~

[@lvv75]

Can I charge it from ~220V?

[@blaskotron]

are those battery packs interchangeable to dewalt and black and decker? Look very similar.

[@Reviewlamp]

No, they are unfortunately not

[@friendlyfishingguy9556]

Can this drill be used for ice fishing augers? And how would it hold up in 10+ inch of ice

[@kpoohs]

Would you consider drilling hundreds of really tiny holes in a cymbal heavy duty work enough to warrant getting the dewalt?

[@Reviewlamp]

+kpoohs I would say get the Dewalt for something like that. The link to the dewalt is in the description above.

[@iboxirun]

Thank you kindly for the video. Just bought mine and this was helpful.

[@Reviewlamp]

Glad it helped. Thanks for the comment

[@OmarAhmed-wj8cj]

can you review the DeWalt dcd771?

[@yeemane1679]

Could you do another video on the other drill from DeWalt?

[@Reviewlamp]

+OneStopEntertainment I certainly can do that. Thanks for the comment

[@sidc4320]

Can you drill metal sheet from this? Like 0.3mm thickness?

[@Reviewlamp]

Yes

[@jamesmiller2854]

How long does it take for a full charge?

[@kcsunnyone]

how to connect the battery to the drill? I bought and I can't find any instructions on how to connect the battery

[@Reviewlamp]

Connect the battery? The battery slides into the slot on the bottom of the drill and clicks into place

[@williampotratz6247]

Just bought one for splitting wood. So far no complaints

[@eemoogee160]

Those wood splitting drill bits work well? With this drill as well?

[@shwetagupta9359]

Sir pls do review of powertex machines

[@samsen3965]

I have two of these and both seem to be stuck, I can't move that so-called Eazy bit lock mechanism. Anything I am missing? or doing wrong or this is a common problem with this cheap item that makes it totally useless? I am really annoyed.

[@johnglady761]

How do u keep the. Power button engauged

[@davidcornell4463]

So this is the drill that Avid Power tried to rip off and failed.

[@robertlalonde4497]

Nice video! Ive got the LD120 and the battery charger flash red when I try to charge the battery, what can I do to fix it?

[@Reviewlamp]

+Robert Lalonde It indicates a defective battery.

[@donovanelliott8667]

Just bought with stuff in it just using it to build a shed and stuff, can it drill good into concrete?

[@Reviewlamp]

It can drill into cinderblock. Not sure about more dense concrete though

[@LegendaryMike]

Wouldn't it drill holes with the 3/8" bit if you changed the setting? Like going to number 6 or something?

[@Reviewlamp]

Depends on what material you’re drilling

[@Reviewlamp]

Depends on what material you’re drilling

[@LegendaryMike]

ReviewLamp I meant to say on the piece of wood that you used for the demo

[@Reviewlamp]

You could drill holes on that setting but you wouldn’t get as much torque as on the drill setting

[@MaryJones-fs4wf]

It comes with one double ended bit. How to use it? Where do I insert it?

[@jyoung6255]

Located at the "muzzle" of the drill there are three divided sections (The one with the numbers,the middle one,and the front one.)hold the middle one and grasp the front one.Turn it like your unscrewing it.if you turn counter clockwise the metal pieces in side will contract,if you turn it clock wise they will close and eventually move out side of the drill like a small drill bit.Once you have turned it counter clockwise wise so the metal contracts into but the drill bit in either side you wish.once that is done hold the middle part and twist the front part untill it is tight on the bit.Hope that helped you!

[@teeford4718]

This really helped me...thank you

[@Oo2k10]

Hey will this product work well for unscrewing license plate frame? I’m trying to unscrew it but is bolted tight. Any suggestions?

[@Reviewlamp]

What type of screws are on it? You could use this drill and a screw extractor like this: amzn.to/3EFaU5w

[@Oo2k10]

@@Reviewlamp it has cross shape head screws. But thanks I’ll try this next time.

[@sarahwhite8698]

I use a lot of my 20 volt tools in a cemetery I volunteer at where there is no electricity. So I have 8 batteries for 3 tools, meaning 8 chargers that I need for all batteries to be charged at once for the next weedeating, blowing, chain saw etc. . . . The charger has no preset holes to mount it on anything. The cords are REALLY long, which is good I am sure. But I need a way for all of these to be in one compact location, with the excess cords out of the way. I am looking at it tight now, trying to find a way to mount it to a board that can be attached to the wall so I can slam the barriers in there and go. But I am at a loss of how to do this. Can someone DIY this and help us out? You can find me at the Crown HIll Cemetery in Pasadena Texas, and contact me via their FaceBook page for that cemetery Im reaching out to ReviewLamp as well as his followerssssssss xoxo

[@pumaring3846]

What's the RPM on this drill? Can it be use to change tyres?

[@Reviewlamp]

No, it cannot be used to change tires. I am assuming you mean car tires

[@pumaring3846]

@@Reviewlamp Yes car tyres. To open nuts and screw them back in.

[@stanalaka821]

@@pumaring3846 you need an impact wrench for that

[@jimtomassetti8928]

Thank You for the vidio. It was a help. Never had a power drill.

[@Reviewlamp]

Thanks for your comment. Please subscribe to my channel

[@ZaberAnsaryOfficial]

Can it drill holes in Brick Walls? Or Concrete? Also Good Job reviewing this.

[@Reviewlamp]

+Zaber Ansary Yes it should be able to, provided you use a masonry drill bit. But as I mentioned, I would not recommend drilling holes larger than 5/16" in diameter in thick, dense materials.

[@Reviewlamp]

+ReviewLamp.com This is not really meant to be a heavy-duty cordless drill.

[@Chukijay]

It will go about half an inch into concrete with a brand new masonry bit and fully charged 1.5ah battery

[@Cookwithme134]

Used mine twice, now drill bit is jammed in 😢

[@dwaynerobertson383]

Excellent review. Of course I want Linda Carter, from Wonder Woman...but I get Karen, from from Ben's Pizza. It's just the reality of life. I'll get Dewalt someday...

[@Reviewlamp]

Thanks for the comment

[@Mister_MasterzRN]

Well done 👍

[@Reviewlamp]

Thanks

[@aliciapineda2461]

I have a DeWalt dcd771 i have a issue with the Chuck, the Chuck everytime it will come loose on me

[@conservativeamber1216]

Black and decker and Dewalt..Both owned by the same Company

[@arieltorres1205]

Can you use this to drill a hole in a wall for a tv wall mount

[@Reviewlamp]

+Ariel Torres Yes, it should work fine

[@hazelgriffith4515]

Will this hold 2mm drill bits? Thanks.

[@hazelgriffith4515]

@The Everyday Rider Thank you so much.

[@souhailyachaoui1578]

BLACK+DECKER LDX120C 20V Max Lithium-Ion Cordless Drill-driver

[@genomexp]

Looks like this video kzbin.info/www/bejne/pZPMm2dtjriUiJY is using a significant amount of your footage, I'd go claim it. I happened to land on both at the same time and noticed.

[@johnnybehealthy5720]

Great tool. Did my kitchen cabinets and remodeled bathroom with it.

[@filipm133]

I am not in this stuff but great video :-)

[@Reviewlamp]

+Filip Martinović Thanks for the comment!

[@filipm133]

ReviewLamp.com No problem :D

[@reviewnebula5612]

Hi ReviewLamp! We loved your drill review video so much that we shared it on our website, Review Nebula. You can see it here: www.reviewnebula.com/products/black-decker-ldx120c-cordless-drill-driver. If you want to share more videos on our page, submit them here: www.reviewnebula.com/share-review.