Black Flag Tumbler Tutorial | KCC Glitter | Swiftpoxy Epoxy | Glitter Tumbler

[@toddeby25]

Absolutely Fabulous!!! Love it!!!

[@KristisCustomCreations]

Thank you!!!

[@kellyspencer4110]

This is hands down the best tutorial I've watched! You were so informative about every detail, thank you!

[@KristisCustomCreations]

Awww, thank you so much! ❤️

[@angiewilson1132]

This cup is beautiful. New to your channel! Going to binge now LOL

[@KristisCustomCreations]

Awww! Yay! Welcome to my channel! 🥰 I hope you find my tutorials helpful!!! ❤️

[@ruthfortitude4887]

Love it! ❤

[@KristisCustomCreations]

Thank you 🥰

[@vonellevanzant237]

Thank you for this tutorial! I love how your cup turned out!

[@KristisCustomCreations]

Thank you so much and thanks for watching! 🥰

[@lynettemott3051]

You really inspire me and I love your work. Thank you for all the time you take on giving directions and your glitter is amazing. Thanks.

[@KristisCustomCreations]

Awww, thank you so much and thank you for watching 🥰

[@chrishebert3240]

That looks awesome!! I’m going to add this to my list of tumblers to do!

[@KristisCustomCreations]

Thank you 🥰

[@chrishebert3240]

@@KristisCustomCreations I’m stuck on this tumbler. My lines don’t don’t come out like there supposed to at the bottom of the cup. A few things I think is different. I’m using a 20oz skinny and I think that’s the same as your tumbler or the pattern size of the stars are different. I’m using the same size tape as you but it looks like my line under the starts is to far away and I thing that’s because I need 1 more row of stars to fill in that gap and at the bottom of the tumbler, the last row is opposite of the way it’s supposed to. The gap line is at the bottom of the cup and don’t have enough room for the last stripe. Hope this isn’t confusing. I think if I redo the starts and add another row that fix my problem. What do you suggest?

[@Duty2rebel1976]

I have been WAITING for this tutorial!! You are the first to upload a tutorial and I am here for it!!! Thank you!

[@KristisCustomCreations]

Aww! Yay!!! I sure hope you find it helpful!!!!

[@ashleybarbree3781]

Was your flag a print and cut file or were you able to find one just to cut? Love this

[@southernmimi8145]

Another Awesome job! Beautiful! Thank You for sharing. Blessings As Always!♥️

[@KristisCustomCreations]

Thank you so much Southern MiMi!!! Blessings as always to you too!!!

[@southernmimi8145]

@@KristisCustomCreations Awe, Thank You So Much Kristi!♥️🥰

[@shawnadearing3281]

Beautiful job and great tutorial! I will be using your method for sure :)

[@KristisCustomCreations]

Thank you 🥰

[@VLX20689]

Really pretty. Made it look so easy!

[@KristisCustomCreations]

Thank you 🥰

[@michelekenyon9060]

Beautiful!! I think I have my Christmas presents for my brothers!!

[@KristisCustomCreations]

Thank you 🥰

[@dianehedricks7860]

This is AWESOME!!!!

[@KristisCustomCreations]

Thank you so much 🥰

[@Oonagh72]

I was literally thinking about a black flag tumbler just before this popped up, and I hadn’t even seen another one! Awesome thanks! Dang that cup is pretty!

[@KristisCustomCreations]

Yay! Thank you! I hope you find it helpful!

[@patgregorowicz1346]

Awesome! Thanks for sharing 😃

[@KristisCustomCreations]

You're very welcome! 🥰 Thanks for watching!

[@joycepugh5347]

This turned out great

[@KristisCustomCreations]

Thank you!

[@edithrobillard3667]

That is beautiful. Great job.

[@KristisCustomCreations]

Thank you! 🥰

[@KristisCustomCreations]

Thank you!

[@pattibleau622]

It’s gorgeous!!! Great job!

[@KristisCustomCreations]

Thank you 🥰

[@dellydell82]

Amazing job! This is flawless!! New subbie here 💛

[@KristisCustomCreations]

Thank you so much! 🥰

[@dianevanderlaan9523]

Thank you! I have been looking for a tutorial for this type of tumbler and I will be ordering 8 ball.

[@KristisCustomCreations]

You're very welcome! 🥰🥰🥰

[@sandym4494]

Love it!!

[@KristisCustomCreations]

Thank you 🥰

[@kimlandis4360]

Ms Kristi that cup is absolutely Beautiful 🇺🇸🖤 going to have to try this for one of my Favorite veterans at our Local Legion she loves her black and sparkles ✨ 🖤🇺🇸thank you so much for the Fantabulous tutorial🇺🇸😍PS 8-Ball is my favorite Black glitter ✨ 🖤✨😍

[@KristisCustomCreations]

Aww! Thank you so much! 🥰🥰🥰

[@kimmywhitt6112]

Your creativity is amazing 😍❤️

[@KristisCustomCreations]

I wish I could take credit but I've seen lots of these beautiful tumblers on TikTok... Lots of amazing artists on there who give lots of inspiration. 🥰 Thank you ❤️

[@susanamarin7342]

Beautiful!! The song was kinda weird though 😂 but the tumbler was amazing

[@jraydaly]

Absolutely gorgeous! WWG1WGA 🥰

[@KristisCustomCreations]

Thank you 🥰

[@laurawomack2988]

Just got my bullet tumblers in today and will be making one black...now off to you website to order the 8bl glitter....it so pretty....Thanks for sharing it beautiful as are all of your tumblers 🥰

[@KristisCustomCreations]

That would look awesome on bullet tumblers! Please share pics of them in my Facebook group when you make them.. I would love to see how they turn out. 🥰

[@laurawomack2988]

@@KristisCustomCreations I will try my best to make it look as good as yours just made my order and can’t hardly wait to get it started. I will definitely show you when I’m done....thanks

[@KristisCustomCreations]

@@laurawomack2988 I see you just placed your order.. thank you 🥰 I can't wait to see how it turns out!!!

[@laurawomack2988]

@@KristisCustomCreations your glitters are beautiful and I’m sure I will be ordering them all 😁

[@KristisCustomCreations]

@@laurawomack2988 thank you! 🥰🥰🥰

[@tamijohnson9870]

This is beautiful!! where did you get the pattern for this?

[@JessicaMichel123]

This is great! How big is the square of stars?

[@KristisCustomCreations]

I don't remember exactly but I think I made the the rectangle approximately 4 inches long

[@juliasava5965]

Beautiful tumbler! Thank you for the tutorial, going to try it now. What size were the stars?

[@Nelswifi]

That’s amazing! I love the 8 ball. It’s all out though. Do you think a gunmetal would work?

[@KristisCustomCreations]

Gunmetal is not super dark but would probably work. I should be getting more 8 ball in in the next couple of weeks.

[@Nelswifi]

@@KristisCustomCreations thank you so much!!!

[@Jules4ofakind]

Can you give me an idea on how I can do a black flag but no glitter?? I would like to make one for my brother n law?

[@KristisCustomCreations]

I'm actually making one right now with no glitter. Instead of using glitter, I mixed a dark gray/black mica powder in my first coat of epoxy and put that on over a black spray painted base. After that, I put a second coat of epoxy on the cup and it is now ready for the Stars and stripes just like in this tutorial. I will paint that part solid black. I hope that makes sense.

[@Jules4ofakind]

@@KristisCustomCreations yes! thank you for your help

[@KristisCustomCreations]

@@Jules4ofakind you're very welcome!

[@utoonosey7135]

Do u sand between coats of epoxy?

[@KristisCustomCreations]

I sand after the the second coat of epoxy and that's usually enough

[@dianevanderlaan9523]

I love this and hope to replicate it exactly. Can you please share the Google link for the flag? I can't figure out what to use.

[@KristisCustomCreations]

I just found a random flag on Google and used my silhouette program to trace the stars. There are lots of great ones available on Etsy too. I honestly don't even remember which one on Google that I used. 🤷🏼‍♀️

[@dianevanderlaan9523]

@@KristisCustomCreations thank you !!!!

[@KristisCustomCreations]

@@dianevanderlaan9523 you're very welcome!

[@Drumstickridgefarms]

What size did you have the stars?

[@lnsmdove41]

The cup is beautiful but need to figure out how to squeeze in all 13 stripes

[@chrishebert3240]

Ok, I have some questions. I have struggled to the point I’m going to pull my hair out! Lol. When I do my tape lines I end up with to much space at the bottom of the stars I have gone through about 1/2 a roll of tape trying to figure it out. I think the problem is I’m using a different size tumbler, maybe different size tape and the star pattern might be different. How do I fix this problem so I’m not getting so frustrated?

[@Duty2rebel1976]

What was your measurements for your stars? This is turning out to be so much easier than I thought. Thank you

[@KristisCustomCreations]

I had the Stars measured out at 3.978 in wide by 3.127-in tall. You are so very welcome!

[@Strawberries_Cr8tions]

Thank you

[@Duty2rebel1976]

@@KristisCustomCreations thank you!

[@sabrinawilson8944]

I have an order for 2 of these, but assumed it was a decal looking at the picture of them. Could you just do a decal for the flag rather than spray paint?

[@KristisCustomCreations]

Yes, you can do it with a decal also 😊 I just found that taping it off and painting it was so much easier

[@lorriebrennan2990]

How would you add a blue or red line for first responders.

[@KristisCustomCreations]

I am actually a first responder (in real life 😜) so I love this question... There's a few different ways you could do it but the easiest way would be to go in with some double-sided sticky tape and add a blue line in the middle with blue glitter. I hope that makes sense...

[@lorriebrennan2990]

@@KristisCustomCreations do you think its to girly for a guy because of the glitter?

[@lizmcdaniel5635]

Hey so I got a serious question. I've been making tumblers for a few months now and I'm having trouble getting them perfect. I am a perfectionist and I'm so worried that if they're not perfect no one's going to buy them. So is there such thing as a perfect Tumbler. I mean they are handmade

[@KristisCustomCreations]

I am a perfectionist also but these tumblers are all handmade and they are bound to have some kind of small imperfection. It really depends on how big the imperfection is and how lucky your customer is. The customer definitely needs to understand these are handmade items that can have sandal imperfections. I've seen some Tumbler care cards on Etsy that pretty much explain that. Might be good to throw one inside each tumbler you sell.

[@lizmcdaniel5635]

@@KristisCustomCreations My my main problem is small little bumps. Maybe like 3 on a tumbler. I literally tell myself seriously.

[@KristisCustomCreations]

@@lizmcdaniel5635 if they are tiny then I would just make sure your customer is good with it. We are often so hard on ourselves as crafters and we overthink every tiny little flaw because we are proud of our work.

[@lizmcdaniel5635]

@@KristisCustomCreations Exactly. Thank you 😊

[@KristisCustomCreations]

@@lizmcdaniel5635 you're welcome!

[@Strawberries_Cr8tions]

What kind of epoxy was that you used again??

[@KristisCustomCreations]

It's called Swiftpoxy from www.tumblerpoxy.com 😊

[@Strawberries_Cr8tions]

Thank you!!

[@KristisCustomCreations]

@@Strawberries_Cr8tions you're very welcome!