Black Widow Motorcycle Lift Review 💪🏾🥶

[@sirkingaling3525]

Great video! I just purchased this from Discount ramps as well a couple days ago, should be here on Monday.

[@BaggersandBourbon]

It was the best investment. An it was easy to put together.

[@SQUID_Road_Glide]

Oh yeah, I’m replacing my eyebolts, they are way to rinky dinky. I did use your advice and got a 200gal compressor on sale. You have done a phenomenal job on your garage floor. I got Horse Stall Mats from Tractor Supply. I also had to put rubber with gorilla tape at the ends of the 3 poles, one of them tattooed one of my bags. I also got the extended approach ramp. My Fat Boy was not loving the change from ramp to table. FYI to everyone else, I ordered from Amazon and they delivered it…inside my garage! 2FD SQWID ET1(SS/SW/MTS) US Navy, Ret.

[@BaggersandBourbon]

My boy did the same thing used the rubber Mats. They were so heavy we had to use Dollie’s. I need to get a shop mat to sit my lift on because it scrape the floor.

[@SQUID_Road_Glide]

Sup Roland Martin, 😂 you sound just like him Brah. I took delivery on mine this month. My wife got it for me in part on your review. I should have gotten the Special, It looks old school to me, but I know you’re warmer in the cold, and dryer in the rain. Definitely worth it. I got a 2021 FLTRX to go with my 2020 Fat Boy. I went with a Condor, so I don’t have to worry about holding the bike up before using the tie-downs. OBTW very cool garage. My buddy owns a ruffing business and came over to mount my hose real with his nail-gun. On SilverBACK (Road Glide) I’m setting up for an Hpi 70mm throttle body/Manifold, vented trans cover, replacing the primary cover (stripped a derby screw on my last 3 hole). The more I consider DIY the Fueling 508 cam chest kit, the more I get cold feet over taking the heads off to insert the push rods. I have future plans for S&S rockers/Gorilla rods/T-Man head breathers to compliment an S&S 129. Plus there are specification concerns I have, like Run-Off and fly-wheel barring replacement, and Fueling cam gear replacement. On Killmonger (Fat Boy) . I had Blockhead Moto do the work (look up Blockhead Stage 1 & Stage 2), that’s me. I should have done a SE 64mm throttle body and manifold/ 6.3 injectors with that Woods 22XE, I’m going to do it now as my first lift job. I hope I don’t screw it up, but then that would give me an excuse to go back in. That’s what she said. Subscribed 2FD (Two Fingers Down) SQWID ET1(SS/SW/MTS) US Navy, Ret.

[@BaggersandBourbon]

You won’t mess nothing up with doing a cam. You can also adjust your pushrods without taking your heads off. Imma take a look at your bike video in a few. Also look at cycle rama or star cam’s you will get better numbers 512 or 3/4 cam

[@sessionswithseon3653]

Dope Video, Cam do you have a video of the breakdown of your motorcycle? Im running 18 inch Cordova pullback bars on my glide, but I wanted that look that you have,honestly I like your setup. Id like to replicate it. Just not sure the terms of what im looking at

[@BaggersandBourbon]

I’m running 20inch pullbacks. I have a 9inch clockwerks smoke windshield. Actually I’ll shoot a video describing everything.

[@kirkwetsell3854]

Nice video! Very helpful.

[@BaggersandBourbon]

Thank you.

[@scottcarey3182]

Cool, thank you

[@lost_marblesadv]

How did you get the pedal / hose to come out on the right side? I have the same lift, but the way the outlet on the air cylinder is mounted, my pedal only fit on the left.

[@BaggersandBourbon]

Fold it back through the middle. It will be just fine. Mine was the same.

[@scottcarey3182]

Have you tried lifting a trike on it yet? My wife has an rg3 that I want to put on this, thanks

[@BaggersandBourbon]

I haven’t but I do have the pro lift one which can lift trikes. It can lift up to 1500lbs