Blender 2.9 Liquid Simulation in Eevee - Liquid Through Pipe

[@Roboticdock]

The fact that it started all with a small vertex of a plane and ended up being a pipe with running water is mind blowing! You also solved my problem with respect to water flow through the pipe not toward the gravity!

[@vgleviathan911]

Glad I could assist.

[@jong7513]

You can make the pipe without the circle curve. When you make the pipe centerline a curve, then go to Object Data Properties, and select "round". From there, simply choose diameter and resolution.

[@vgleviathan911]

Nice thanks for the tip

[@8bitmagic]

Finally a tutorial that I could follow about liquids :P

[@KadeMarkoux]

Yeah exactly! Same Issue here, I followed like 3 other tutorials to the T and couldn't get it working at all but this guy explains it all very well and it's working so I think the other ones I watched didn't explain something or skipped a step because I was going crazy trying to figure out what was wrong. Thanks a ton @VG Leviathan, I just sub'd as thanks! :D

[@localnyraccoon]

Nice! Made my first proper fluid sim with this.

[@stephencurah1059]

Awesome tutorial, thanks

[@deni5967]

Amazingly helpful tutorial. Your explanations are short but helpful. Thank you and subscribed!

[@vgleviathan911]

Thank you very much

[@LM-uv3qe]

Thank you so much. I never got my simulation running this well! Nice tut!

[@vgleviathan911]

Big pleasure I'll be making another one within the next two weeks been a while since I posted #covid

[@incatm0]

@@vgleviathan911 Where can I download the like water. I really need this for homework

[@ozhinz]

@@incatm0 the what?

[@tyrocky3759]

you all prolly dont care at all but does anyone know a tool to get back into an instagram account?? I was stupid lost my password. I would love any tricks you can give me.

[@jaydenfrank6925]

@Ty Rocky Instablaster =)

[@sachinfernando4354]

Amazing dude! Can't wait to be done with exams so I can get back to Blender :)

[@vgleviathan911]

Well bro I hope you exams go well. when are doing them?

[@sachinfernando4354]

@@vgleviathan911 Thanks mate :) My last one is tomorrow. I am procrastinating on KZbin right now ahah

[@vgleviathan911]

@@sachinfernando4354 Something we all tend to do. I hope it's well with your exams. All of the best.

[@vgleviathan911]

Hey there hope your exams went well.

[@TheTubepc]

Nice Tutorial, I was able to follow and currently started my Render.

[@vgleviathan911]

That's awesome please feel free to share your render here would love to see it

[@rico4286]

i did this tutorial today , tomorow i`ll try it again . nice job

[@vgleviathan911]

Hope it works well

[@rico4286]

@@vgleviathan911 Yes thank you.

[@oscarradford1821]

Thanks so much. I did this tutorial and it was great.

[@MhLiMz]

Nice tutorial! But in the beginning, the deletion of three vertices and moving the remaining vertex to the 3D-cursor, that could have been done in one action with merge at center.

[@vgleviathan911]

Great tip thanks

[@xlnyc77]

very very helpful

[@turbo_Guido]

great tutorial, helped a lot!

[@vgleviathan911]

Glad I could help

[@dudecool3050]

Amazing Tutorial! Am really amazed this actually works!

[@vgleviathan911]

I'm really happy it could help a bit.

[@insertusernamehere8125]

Awesome.

[@marshallmarcano6275]

Never have I been able to say I'm so happy to mess around now with 2TB of storage to make new liquid sims

[@vgleviathan911]

They can take up a lot of space

[@royupperton8675]

hi ... you are the only tutor I can understand on here ...... brilliant. Can you tell me how to create the scenario of a spilt tin of lets say paint flow down concrete stairs??

[@vgleviathan911]

Hey there what do you mean with a split tin

[@royupperton8675]

@@vgleviathan911 ... spilt tin .. as in knocked over and the paint is pouring out then running down each step.

[@vgleviathan911]

@@royupperton8675 Hey, that sounds like a great Idea. As soon as I have finished my simple animation series I will do that next for sure.

[@royupperton8675]

@@vgleviathan911 thank you ... look forward to it

[@ottovonspeck1]

My particles just wont work like yours trying the tutorial for the third time but as soon as i add the fluid nothing works anymore

[@akinlis]

try be accurate bro......i had similar issue before but have gotten it right

[@malware5674]

Very very Noise 🔥🔥😃

[@vgleviathan911]

Thank you very much

[@malware5674]

@@vgleviathan911 New Teacher😊😊😊

[@TechTalkofDan]

Like a few others I was missing any liquid from my simulation. I don't know if the author missed a step, or Blender has changed the defaults, but following the instructions exactly did not work. :( After changing a few different values, I finally got it to work. On the sphere, "Surface Emission" was set to 0. Setting this value to a positive number (e.g. 2) allowed the water to be emitted. It would be handy if the author linked to an example file to make it easier to compare.

[@vgleviathan911]

Great idea to link to an example project. I will look at this idea in future tutorials.

[@tarikalpat]

I have the same issue but I couldn't find the "surface emission" setting. In my project, my pipe is kind of big and the sphere is small(around 0.7) and liquid simulation is not working if the "resulotion divisions" below the 270. Could you help me please?

[@QQnowQQlater]

Following the tutorial exactly worked for me, even in blender 4.0. Surface emission isn't necessary, that just means how far away from the geometry the particles will be emitted. There's probably another issue. Make sure you apply rotation and scale to everything. Other than that it wouldn't really be possible to diagnose outside of someone better, without a blend file to debug. @@tarikalpat

[@mp_prxductions253]

At 9:12 the fluid didn't come for me

[@jonathanbrown8698]

The liquid simulation works great, but the domain still remains visible when i take it off wireframe view :(

[@vgleviathan911]

You have to bake your mesh first

[@ranhat2]

How to add fluid in pre-existing, immobile tubes (artwork)?

[@vgleviathan911]

Not sure how you mean my friend

[@carharttblade]

I have a problem with my project where inflow object is kinda small compared to domain object, inflow is 10x10x2 m and domain 100x100x70 m. The water moves oddly and there is not enough of it coming out, can the size difference be the problem in here?

[@vgleviathan911]

Try increasing your liquid resolution in the domain settings and see if that helps

[@matiassantacruz5487]

When I do the quick liquid option, nothing happens…I’ve been trying to solve the problem for two whole days :( Sometimes there will be fluid, other times not. If I don’t put the sphere inside the tube, then it does work though

[@vgleviathan911]

It could be that the resolution of the liquid is too low to pass through the. Try increasing it when in the pipe

[@b.i.b7582]

When I Bake the water fall down from the pipe I put is as effecter and value 0.4 it's same

[@vgleviathan911]

Did you tick is planar?

[@b.i.b7582]

@@vgleviathan911 No

[@prajooshn9062]

Not working when domain area is scaled

[@vgleviathan911]

After scaling your domain area, go to domain settings free the data and bake it again.

[@edloman588]

No fluid during simulation, help? I followed everything up to 23:00

[@JackalBlender]

Hello, thnx for the tutorial :) just a question, can it be used with a 2.93.1 version of Blender ? I mean, does it still apply and work in it ? Thank you. Edit : just tried, it works, however, how do you improve the quality of the water ? Mine looks slightly pixelated.

[@vgleviathan911]

Hi there try increase the resolution in the domain settings

[@JackalBlender]

@@vgleviathan911 ah yes thank you, just what I needed ;)

[@vgleviathan911]

Any time

[@jochenweidler8645]

Does anyone know why the particles don't really align with the pipe, but behave like there's a pipe with a smaller diameter in the pipe?

[@vgleviathan911]

The resolution of your simulation is too low increase it and this problem starts to go aways

[@jochenweidler8645]

@@vgleviathan911 I just recognized you answered that question. I found out by now, but that's amazing. thank you!

[@nq5044]

Is 512 or 200 gb storage enough for liquid animation?

[@vgleviathan911]

I used to do it on 200gb SSD they do take space really quickly if you're doing them often. The more information the bigger the file

[@RayHorn5128088056]

Why can't a cylinder become a pipe?

[@vgleviathan911]

You could definitely. It's just for customized pipes this method works well as you can use different shapes.

[@lissyanna7683]

bei der vergrößerung des kastens stürzt blender immer wieder ab :( dabei hab ich n ziemlich guten pc

[@akash4849]

Does blender work on a budget processor like Ryzen 5 3400g with vega 11. Simulations??

[@vgleviathan911]

Well I'm using a 5th Gen i5, Gig Ram and no GPU. I'd say be careful with the resolution that you make your simulations. A standard office pc isn't built for but you can do smaller simulations specially in Eevee.

[@vgleviathan911]

Keep a close eye on the heat of your pc

[@akash4849]

@@vgleviathan911 so you are working without gpu?? Thats cool. Still it works right. Will ryzen 5 3400g work as well? It has integrated gpu. Vega 11

[@akash4849]

@@vgleviathan911 how many Cores and threads in your i5

[@vgleviathan911]

Honestly have no idea. Hahaha haven't bothered looking.

[@jesperjee]

Is Blender possible to use on a mac? I have tried several tutorials but it never works as it is shown.

[@vgleviathan911]

Hi there what specs are you running on your Mac?

[@vgleviathan911]

I've done a render on a low spec iMac before.

[@jesperjee]

@@vgleviathan911 Hi! I Have an 27 inch Imac - late 2012 with 32 GB RAM And a 3,2 GHz Quad-Core Intel Core i5

[@vgleviathan911]

You should be able to do some Eevee work on that. Has it got a little graphics card ?

[@vgleviathan911]

The 32Gig ram should give you the ability to do baking and so forth your CPU might get a bit hot when rendering though. Up until now I've been using an i5 with 12gig ram and I've managed

[@9words40]

blender litquid is thicc xD

[@vgleviathan911]

Yeah so to achieve higher quality or thinner you need to amp up the resolution of your liquid

[@nguyenminhtri1101991]

i can't bake mest! :(

[@vgleviathan911]

Hey there what version are you using?

[@nguyenminhtri1101991]

@@vgleviathan911 i did it! I fogot to click "Is Resumable" below Type Modular! Thanks for reply! ^^

[@vgleviathan911]

Ah awesome yeah it took me a while to get used to that feature

[@cr0uchingtiger]

wish I knew why every single blender tutorial just doesn't work for me. I hit bake, it runs through the timeline like nothing (super fast) and at the end, there's no fluid simulation particles whatsoever.

[@vgleviathan911]

Are you using the quick effect method?

[@timonevanniekerk42]

🙌🙌🙌🙌🙌🙌🙌🙌🙌

[@AdamNorse]

this sheet is too sensitive, cant work with it, just breaks constantly : / thx anyways

[@vgleviathan911]

Sadly it is pretty easily broken. Sorry it didn't work out for you.

[@AdamNorse]

@@vgleviathan911 it did work, it just isn't practical to WORK WITH : P cus it just constantly breaks

[@vgleviathan911]

What version of blender are you using?

[@AdamNorse]

@@vgleviathan911 2.9

[@vgleviathan911]

When do you have your biggest issues

[@holdenrobbins852]

Why does everyone in Blender tutorial videos call it kaysh, instead of "cash" like every other computer scientist. You don't store a /kaysh/ of food, you store a /cash/ of food.

[@vgleviathan911]

Different countries, culture, schooling, accent. Exposure to a certain pronunciation in media and conversation. So yeah many factors can determine how people pronounce a word.

[@SeanyKrabs]

No liquid is coming out of the uv sphere. Boy does mantaflow suck 😅

[@insertusernamehere8125]

No it doesn't suck. It's amazing, you just did something wrong

[@SeanyKrabs]

@@insertusernamehere8125 dude, mantaflow sucks. I switched over to the FLIP Simulation addon. I’d always have to bring up the resolution divisions to a billion, tweak my inflow objects, etc. FLIP sims are more optimized for no error returns.

[@insertusernamehere8125]

@@SeanyKrabs oh well I use flip then, because thats the option it says, hoenstly it's very easy to use and I like it, not going to try mantaflow then.

[@SeanyKrabs]

@@insertusernamehere8125 just so we’re on the same page, I’m talking about the FLIP addon on the Blender Market.

[@insertusernamehere8125]

@@SeanyKrabs no I don't have the flip addon then, the thing I'm using is mantaflow then, welp it works for me atleast so I'll just keep using it how I do now, what I mean by I have FLIP is that theres some box that says FLIP (or another option) and FLIP is enabled (In the settings of the domain object)

[@esmehulme6903]

Nice tutorial, thanks!