Bell Bullitt is true to size. I've had one for a year after i saw Adam Sandavol's great review. Excellent helmet. The Silver Iridium is the "chrome". VERY easy to change out visor...you need a quarter...i do it nightly. yours is defective...never had a rattle...7,300 miles so far... again, watch Adam's video...someone who has rode with it across country with 100s of miles.
@averagejohn74356 жыл бұрын
Love the look of that helmet. I've been wanting one for a while now.
@dkelli60206 жыл бұрын
I've got my eye on one of the bullits. Good to know they changed the old pressure point snap
@AdaMoto836 жыл бұрын
I’ve got the Matt black bullet. Love it but would say it’s loud with wind noise. Looks amazing and fits me perfectly. Love the carbon look as well. Congrats on the 100k bro keep up the good work. 🤙🏾
@chadmock58836 жыл бұрын
I have a Bullit as well. I recommend the Bullit for riders with windshields or faring. I use my Bullit on my Harley and I use the Schuberth C4 on my Bonneville. The Bullit moves a lot of air. But on a naked bike that may get overwhelming.
@Hoth19074 жыл бұрын
Excellent review as always. I got the silver flake bullitt, it is an awesome helmet that fits me like a glove. 🤟🤟
@logangilliam68356 жыл бұрын
Huge congrats on hitting 100k subscribers! Absolutely love this channel!
@5xironman4 жыл бұрын
I have this helmet in carbon fiber and I really love it here in Florida. There is great air circulation inside the helmet. Might not be good for vloging but I like the comfort and style. Also, the outside tab comes in black or brown. I would have expected them to put a black tab on a black helmet.
@sumyonguy6 жыл бұрын
It will whistle inside the helmet...need to block the rear vent a bit..."Bernoulli effect", slow down the venting. The sound does sound like its coming from the front..and it is, but if you block the rear vent a little..you;ll be golden.
@cavemanzebra6 жыл бұрын
14:15 its blockbeard the pirate lmao love the videos brother.
@sprinkman10006 жыл бұрын
Have the Bullitt Carbon, very light weight but does take in a lot of wind noise.
@melonvalera2 жыл бұрын
Hope you showed how the head liner was removed, thou still loved that you showed how the Head Liner was installed. BTW, is the Rear Liner removable too? :)
@aftrunx5 жыл бұрын
Thx for that! First usable review about this Helmet. There are two interior versions, deluxe and normal. The normal has this click interior you mentioned that really hurts with the time (pressure points). The DLX or Deluxe are much better. Nobody says that in any review! Based on your review, i will order the carbon now. Thx!
@infini19704 ай бұрын
Wish I'd watched this before I ordered the L. I feel like I might need the XL. I wonder though if the shell is the same and I can't just order the liner for the XL and should fit better? Oops you answered that while I was typing. PS: I also think a small gap with the shield can be helped with a thin foam line at the bottom. One side taped. very thin.
@josebellorin34193 жыл бұрын
In my opinion the best looking retro helmet (just best looking)
@g0nk6 жыл бұрын
I LOVED this helmet, but after suffering with the constant whistle from the forehead vents, I had to get something different.
@theChestnutMtnTinman6 жыл бұрын
I’m interested in how GoPro mounts stick to it. My HGC has problems with 3M sticking in heat
@scottrubie68265 жыл бұрын
I’ve got one it’s awesome so can you do the visor rattle fix. Would love to see what the fix is. I just won a new Eliminator which I t next couple weeks.
@SuperSnallygaster6 жыл бұрын
Look forward to your review. Mine has the snaps in front, but I've had it for a few years. Visibility is amazing, and airflow under the chin bar is plentiful - almost feels like a 3/4 in that sense. Definitely noisy though. I don't have the carbon version, but I'm thinking about picking one up.
@russellwalker38376 жыл бұрын
i have the harley=davidson version. fits like a glove and i love it.
@joshuaburgess4876 жыл бұрын
CONGRATS ON 100K SUBS
@dechanpaman6 жыл бұрын
Great looking helmet. Great videos.
@Cali2FRESH16 жыл бұрын
Where can I find the gold BLOCKHEAD bike decal ?
@migueldc5616 жыл бұрын
Nice helmet. Hello from México 🇲🇽
@mernstgeek6 жыл бұрын
Miguel DC hello from Biloxi Mississippi
@johnscaife27256 жыл бұрын
I see that space around the chin bar accommodates your beard. Is that better for you?
@156x6 жыл бұрын
That bubble visor reminds me of that dude from Futurama 🤣 Other than that the Helmet looks rad.... A helmet you’d wanna wear to a Gentleman’s Ride 🤘🏽🇺🇸
@erind98546 жыл бұрын
The bubble visor makes it look retro, which I think is cool. It's different. Kind of reminds me of an astronaut. You goin' to the moon next? 😆
@road_king_dude6 жыл бұрын
Yep. I consistently hear that the wind noise in these Bullits suck.
@TheGreatestBeyonder5 жыл бұрын
Good stuff! Is there a part 2 to this? I wonder if those holes above the visor could be temporarily blocked from the inside on colder days???
@calebp66676 жыл бұрын
Like the Hart Luck Bubbles Bell Bullitt
@tobias82196 жыл бұрын
Looks so clean
@ZmbiBglz6 жыл бұрын
Congrats on breaking 100k!!!!!
@AnorexicPandas2 жыл бұрын
I just ordered mine
@onerider37025 жыл бұрын
That one may be a bit pricey for me...I was thinking of a Bell Qualifier. Any thoughts on that one?
@ernestarocha35306 жыл бұрын
This helmet reminds me of the Cobra Commander from GI Joe.....
@rafaelalcocer41534 жыл бұрын
good morning friend, sorry I have a bell bullit the same but when I go to more than 120 km / hr the Flat Face Shield already vibrates a lot, it will be that I already need to replace it or so the helmet is driving a street glide, sorry my bad English hehe
@MuncieMan6 жыл бұрын
In the first ride, let us know what you think about the low profile/thin chin bar. Do you think it reduces the safety feature being thinner?
@nexus36966 жыл бұрын
New sub here. Enjoy the vids. Curious as to what blue tooth set up you guys use with your helmets. Wife bought a helmet with pre built in bluetooth and she can't hear anyone with volume maxed.
@frickenmikey6 жыл бұрын
Love everything carbon.
@djohnson36786 жыл бұрын
awsome vlog !!
@clarkbabin97996 жыл бұрын
Was going to say nice bowling bag
@QU13TMAN6 жыл бұрын
I have a feeling it's gonna be one of those "separated at birth" deals with John Maxwell. Block could you do me a favor please and ask Raj how nighttime visibility is with the lane splitter tinted shield? I have the lane splitter and want the chrome mirror shield but am concerned about low light visibility. Space motorcycle cop is kinda what I'm feeling! It's all good to each thier own right?
@cmattos17606 жыл бұрын
QU13TM4N I have the lanesplitter with the chrome mirror shield, and dude, you can’t see a thing at night. I always bring my clear visor in my swingarm bag. I also have a bell bullitt with a black face shield. Same thing, always keep your clear visor close.
@QU13TMAN6 жыл бұрын
cmattos1760 Hey man thanks so much for the info! Really appreciate it!
@Worshipbyruben6 жыл бұрын
Will that visor fit on my bell riot? It looks sick!
@karbonkevin9192 жыл бұрын
Can I use this on a race track for cars?
@ome696 жыл бұрын
I love it and wanted to get one until I see the Sharp rating as it scored a bit crap on one side in particular.
@NevermoreMoto6 жыл бұрын
dandanthefireman is probably going to talk you out of that helmet with his freinds crash experience.
@modepush4 жыл бұрын
Can you wear it with glasses?
@Corey-cn7sl6 жыл бұрын
Where’s the low rider s ?? It’s all Honda groms now
@nathaniel60266 жыл бұрын
Sick Tool bench
@supersportimpalass4 жыл бұрын
Too bad they can't redesign the visor and latch along with a better seal to cut down on the wind noise. I believe they released this helmet about 5 years ago so its really due for an update. They could easily make some improvements without sacrificing the style
@jimws-razorboston30446 жыл бұрын
Cycle Gear is great as well!
@mernstgeek6 жыл бұрын
Neat way to use a bowling ball bag to carry your helmet lol
@EminBastea2 жыл бұрын
silver visior link?
@johnprice86256 жыл бұрын
GREAT HELMET, I Two
@michaelcalico26289 ай бұрын
just wondering did bell send you this helmet for free
@djlarryb686 жыл бұрын
Thanks for the video but the reviews are noisy on this helmet. I’ve considered this helmet but also considering the Shoei RF S1
@ferngully606 жыл бұрын
Looks good
@eddietheloggie6 жыл бұрын
Not my bag dude. All power to those who like it but for me it's aesthetically just not happening. Also, not enough vents, no mid range visor lock points and what about pinhole compatibility?
@MrNosajwhitey6 жыл бұрын
Don't normally watch things like this but missed your voice lol
@user-rc8im8wz1z6 жыл бұрын
Is that bell logo in the front of the helmet removable?
@BlockheadMoto6 жыл бұрын
No, it's not.
@neotheseattledj5 жыл бұрын
It looks cool but it also looks like the helmets that legos figures wear
@OJMAH2 жыл бұрын
i want to see motogp riders wearing these bell helmets. what it will be like at 340km/h ?
@charlessexton17196 жыл бұрын
I wish there was an extremely light weight helmet that I could wear. I can't put any weight on my head due to a neck injury from a car wreck 3 years ago. They dont make a helmet light enough for me to wear.
@countryking7556 жыл бұрын
Look into an akoury helmet smallest dot helmet I've ever seen
@charlessexton17196 жыл бұрын
@@countryking755 thank you. If they weigh as much as or more than a hard hat then they are to heavy. My neck can't take the weight. I will check them out and see if they will work.
@petedavis10406 жыл бұрын
Loud with wind noise and rattles, very bad when in the 🌧! It pours inside like a waterfall.
@bradmoor90426 жыл бұрын
Hello from Oz.
@trentwilliams11766 жыл бұрын
Hahaha my shoei is definitely not beard friendly. My big red beard hangs out lol
@MadShepard4 жыл бұрын
this looks like a retro sci fi space helmet
@johnprice86256 жыл бұрын
It come with two
@zombieaficionado62686 жыл бұрын
I bought this exact helmet for my wife and wore it a few ride and I gotta say..... buy something else. It looks nice BUT the chin guard feels cheap and thin. I honestly think if in an accident that it would break and possibly expose the lower face/chin area. I personally think that if a 600 dollar helmet feels cheap in any way then maybe it shouldn't be 600 dollars but that's just me. In addition it doesn't seal that well, probably because of no gasket so if you get caught in the rain, it will run into the helmet. For 600 you can get a carbon helmet well beyond what the Bell Bullitt provides.
@Accurize210 ай бұрын
Luckily ECE doesn’t just go by how you think it might hold up in a frontal impact. It passed the ECE test. No worries.
@knownaswoolf37186 жыл бұрын
Oh Hi !!
@joshrandall52976 жыл бұрын
Buy the Torx. Better value.
@adrianlazaroroman6 жыл бұрын
That beard tho! 😏
@ernestarocha35306 жыл бұрын
Put that beer in the Frig!!!
@laurieconnelly52806 жыл бұрын
I get helmets are important...but their own bowling ball bag...scratches are like scars...stick a sticker (bandaid)over them or wear the scratches (scars)like badges of honor...its shows you rode...looks like the scuba helmet from johnny quest...but much luck too you anyway
@superduty1316 жыл бұрын
Face shield!!! Not Visor! Most helmets utilize a Face Shield, but 3/4 and half helmets can use a Visor because they have snaps for installing a Visor......lol.
@vector69776 жыл бұрын
better be real carbon fiber for $600!
@eddietheloggie6 жыл бұрын
$600? Damn guy for that money I'd want a bike too! No way, I'd pay that much for that helmet!
@rosmaraldimanagitalibi2466 жыл бұрын
Quality over quantity. I don't know much about this specific helmet, I think it looks like shit. But one thing that usually comes with a higher price, is quality. Not safety, though sometimes, but mainly it becomes a higher quality product. More features, or more refined features, that function better and stuff like that. I prefer saving up a little longer, and buying something with higher quality, since it's in this case, something i am required by law to wear, so i want it to be very comfortable, and it needs to have the functions i want, and those functions needs to be well implemented and function without issue. And btw. You wouldn't want a carbon fiber helmet. Carbon fiber is shit for safety, though it does look good, and it doesn't weigh anything.
@richarddobbins91846 жыл бұрын
It looks bad with the bubble visor, a little better with the flat visor. Still think it is ugly as sin no matter what. Each to their own and all that jazz.
@kevinhilnbrand13736 жыл бұрын
Ok.... I'll say it. IT'S FUGLY.
@tomseviltwinky4 жыл бұрын
Too bad the sizing is only for small people.
@hkirk236 жыл бұрын
$600.00 wow
@jymatney6 жыл бұрын
Danger will robinson!, stole it from lost in space.
@matthewventura36756 жыл бұрын
Yea I'm number 4
@bobbyromo696 жыл бұрын
Yo!
@MaghnusmacanGhabhann6 жыл бұрын
So let me get this straight. This is a butt ugly helmet that's a bitch to change the visor and has 2 positions open and closed. umm F that.
@122razer6 жыл бұрын
Hate to say that is an ugly hellmat lol
@glenniven57756 жыл бұрын
3
@MuncieMan6 жыл бұрын
first
@Mark-qg8hm6 жыл бұрын
Somebody doesn't understand basic physics. You suffer a head injury because you're head hits something. Hitting the inside of a helmet is no different than hitting a road. Your head is still hitting something. The theory behind a helmet is the cushion, not the shell. The idea being that the cushion will slow the acceleration of your head before it comes to a stop, thus minimizing the severity of the impact. The problem is if your head decelerates slower than your body, the impact is transferred to your neck. A helmet is doing nothing but trading a head injury for a neck injury. Statistics show the mortality rate is the same.
@ivyivyivy3166 жыл бұрын
I call bullshit, helmets are designed to ABSORB a majority of the impact. If you think you're safer without one you're a dumbass.