Traction Compound At The Push Of A Button?? / Self Contained Traction Compound Sprayer

Traction compound at the push of a button! Let's test this theory out.
SPRAYER- amzn.to/490iBmX
Join this channel to get access to perks:
/ @brew2lfoxbody
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
WANT BREW2L DECALS? www.shopbrew2l...
LINK TO SHIRTS: / @brew2lfoxbody
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.t...
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.c....

[@dennistwitchell8821]

Gosh,that brings back memories. My brother and I used to do this when we were in high school 45 yrs ago. I had a 70 Charger and he had a 71 Cougar. We sprayed the water right on the tires and did burnouts. When I got older, I used to dump Rain-x right in the washer bottle, along with washer fluid, so everytime I used it, it applied Rain-x to my front window of my car. Love it!

[@TommyT236]

Factory option in cars from the 60’s and early 70’s. Was for snow melt fluid. People didn’t use it to melt snow in Hawaii. My friends 69 Impala 427 SS had it.

[@bobfalfa76]

I did this on everything back in the 90's, best nozzles to use are old metal windshield washer sprayers out of a square body Chevy truck or anything that had the metal piping, they spray a fan pattern and don't gum up as bad as plastic stuff. For burnouts and just having fun, in front of the tire is ok. If you're serious, and use traction compound,I found it best to spray behind and roll back into it, don't want something getting under your tires on a pass. Only put in as much as you think you'll use that night, afterwards run some alcohol through the system, it helps to keep it from gumming up.

[@bobfalfa76]

You can also use MEK to tune your mixture to the outside temp, it can be used to clean the system as well.

[@hotrodray6802]

Good nozzles👍👍👍 thanks.

[@FORDMAT77]

This will absolutely help when cleaning up your tires (burn out) for better traction

[@BREW2LFOXBODY]

Agreed

[@jesseworkman4418]

There's usually a few different spray nozzles in stock at the local parts store that may work a little better especially if you slightly modify them to change the spray pattern.

[@BREW2LFOXBODY]

I’m thinking a small open hose would work best.

[@chaddad3072]

I was thinking the same thing when I watched you trying to get the nozzles to work, just use an open hose and you won't need to hold the button in for so long to get your puddle.@@BREW2LFOXBODY

[@pimpovic2]

I did this when I was younger, to spray water/alcohol to cool my intercooler on my factory VW 1.8 turbo. The water will drip until it runs out because there's no check valve in line for the supply hose. Put a check valve down the line towards your nozzle and it won't bleed your tank dry. If you don't you'll get sick of a goopy puddle everywhere that you park your car.

[@StLMikie]

I’ve seen something like this setup for local car show burnout cars. Spray fluid once the tires are spinning to add to the Smokey effect.

[@johnsheetz6639]

I saw an ad for something like that in hot rod it was called the bleach bomb and it would spray bleach on your tires just like what he's making

[@StLMikie]

@@johnsheetz6639 yes!

[@hotrodray6802]

​@@johnsheetz6639 1964 👍👍👍

[@BackyardBMX73]

Love little projects like this. Nice work!

[@BREW2LFOXBODY]

Thanks 🙏

[@TheModAddict]

I used this sort of design for a intercooler sprayer back in the day. It worked ok actually.

[@mike4fo]

We did this for street racing but got old quick. The nozzle always clogged up but it’s fun lol

[@19jody72]

Old school sleeper chit right there..done that way back in the day..lol We just used a windshield reservoir and pumpget you some sprayers for the windshield.. works perfect!

[@Enigma-Sapiens]

Over the years I've asked numerous drag racers why they don't do this. They all gave pretty much te same answer that the nozzles clog up too often. I think it would be a great way to cut down on the amount of traction compound used and to put it exactly where it is needed. I bet that with the right sized pump and nozzle, it can be made to work.

[@ogsuperflygarage]

Look at you changing the game Brother! Showing some great ingenuity as always! 💯👊🏾👊🏾

[@2valvegt673]

lol I love this video. I just ordered am aluminum washer fluid tank from Amazon. My plan was to it for washer fluid but now I’m thinking who in hell needs a clean windshield

[@G.Harley.Davidson]

Old locomotive trains had sand nozzles in front of the track wheels to give traction on the train tracks.

[@k5wxp22]

@5:10 actual footage of me peeing at 3 am. 😂 Looks pretty cool, and with a little tweaking, should really work! Good stuff!

[@FoxLoxUSA]

Love this! Great mod for tne man show on street night! Hats off for the driveway burnout too! America!!

[@millz1012]

That’s a good idea for sure

[@BREW2LFOXBODY]

Its was a fun experiment for sure!

[@SixOnTheSideBand]

Personally I probably wouldn't want it in front of the tires. Just for peace of mind. The slim possibility of a malfunction. Siphon, wire short etc. I'd feel better spraying behind the tire. And then backing into the prep. But regardless, awesome idea.

[@GrandPitoVic]

DAM BROTHER!!!!HELL YEA!!!! I have thought about something similar. Just not a washer bottle. Man that will prob work great. Even with water

[@hotrodray6802]

We discovered that mounting it above the leading edge of the tire works. Spraying down ONTO the tire. So you don't have to worry about the puddle location or size. Keep spraying while she's spinning.👍. We also did this as engine water injection to stop pinging by using a vacuum switch. You know like running 11/1 on the new crappy gas in late 70s. BTW 13 volts will spray harder than 11v.

[@jameshuffstutler8298]

We use to use the window washer set up back in the day on our hands

[@hotrodray6802]

Nozzle: slightly flatten a copper tube. Put 2-3-4 pieces of .030 safety wires fanned out into it then tap the tube flat, pull out the wires. Instant spray nozzle. Mount with an adel clamp. Works on carbs for water injection too. Some 60s cars had windshield spray nozzles with 2 outlets.😅

[@mr88lx]

There was a guy on here (snizzy2 i believe) had a 357w hatch with this setup around 2009/10. Street car stuff lol

[@natet1227]

I loved watching that blue hatch. I was watching Snizzy2 and Mofobucs a lot back then.

[@malcombailey8590]

That's cool I'm going to ask my uncle's and see if they done it back in the day

[@murphyslaw5.095]

Wow now thats a cool idea😅

[@BREW2LFOXBODY]

I think it’ll work with some tweaks

[@vernondavis2207]

BREW2L, Maybe put the nozzles behind the tires and back into the fluid for burnouts?.Safety for any malfunctions? Just my 2cents..

[@derekedge2089]

Exactly what I thought.

[@hotrodray6802]

🔔😎🇺🇸 2:33 those T lines will siphon the tank. Put the T lines across the rear foot floor and then upwards to the wheel tub. Then the liquid will drain back downward to the tank.

[@jimmyjimmy3649]

That is a fantastic idea. Had thought about it some time ago but didn't know what parts I would need. I will use this, thanks 😂.

[@BREW2LFOXBODY]

I think it can work great with some tweaks 👌

[@jimmyjimmy3649]

I plan to tweaking. Thanks.

[@jimhilt1652]

Always thinking Brew2L

[@Neomustangs]

Hell ya !

[@Dabber422]

The 69 Copo Camaro I owned had one from factory in the trunk.

[@trevoryates3694]

Maybe a rear window nozzle might have one stream instead of two ? Or like you said amazon has different types of sprayer nozzles

[@BREW2LFOXBODY]

I think I’m going to try a small tube with no nozzle actually. Kinda like pouring a puddle 🤷

[@DK-performance]

I put gin in my washer reservoir when I was a teenager cruising the strip in pcb back in the 90’s

[@dannycoots9503]

Great idea

[@paulhudgins5120]

Hell yeah, think it will work, love different and unique ideas, hope you are not in trouble for doing driveway burnouts. 😂

[@BIGDMEDIA]

Awesome Idea!!!

[@ryandoyle4344]

Heat up a pin & slighty enlarge each opening. GL

[@D.Magic_]

Spay on top of the tires

[@scottharvey3054]

Awesome!!

[@bama_5.051]

I have to admit that car sounds really good. If it don't work. Oh well , try something else..

[@BREW2LFOXBODY]

That’s right!

[@wadestewart901]

That's freaking awesome!

[@mattcox3373]

Very cool

[@shanebatten6473]

Did you try to just take the nozzle out and see how hard it sprays out of the hose?

[@Olds_Pwr]

General Motors - Liquid Tire Chain.

[@hotrodray6802]

Geez, when's the last time you saw LTC400 ??? 50 yrs ago. It really worked on ice. Really amazed me.

[@sbfnation2535]

When you let off the button does fluid continue to drain from the lines?, gotta check that could cost you a car at the 330 god forbid. Damn good idea tho, you could also run it behind the tire and back up into it

[@Wortheys_Garage]

Could you turn your foot side ways to work the gas a breaks for a smoother burn out? Or front breaks not holding?

[@jessemontgomery60]

It’s a new toy in a toy. Have fun with it and try it out. Ain’t that what it is for?

[@SuperThugnifacent]

Shit put that shit in the rear instant high way trooper repellent jk🤣🤣

[@nwa_mode7648]

Look I have a stock 83 glx with the carbureted 5.0 I'm not a mechanic I'm kinda new to the car stuff but I'm learning. I want to know what I can do with this thing to wake it up a bit to make it around a 12 to 13 second car

[@alltherpm]

Alot sir, I have a 83, hard year to start with, grab a 302 out of a mountaineer, put 373 gears in back, make as light as u can

[@nwa_mode7648]

Is there not much I can do with the engine that's currently in it?

[@alltherpm]

@@nwa_mode7648 meant to say my engine is the factory engine aswell,

[@kaboom1077]

drift cars use this same idea to cool their tires.

[@robbiehanes4067]

Get some ol sprayers off of a junked car

[@jcnpresser]

Yeah, some of the old import ones, I think, you can adjust the nozzles with a needle, can also clean them out.

[@NorthRacing]

Put some Clorox in that sprayer and see how big of a cloud you can make with a good burnout 🤣

[@huttonsrestoration5786]

Why not nix the nozzle and just let the hose hang out

[@BREW2LFOXBODY]

I plan on it actually

[@jcnpresser]

You sneaky mofo! 😂

[@BREW2LFOXBODY]

🤪