The FIRST Upgrade You Should Do…

Subframe connectors not only help in race cars but also in street cars!
Check out stifflers for more parts and info.
Subframe connectors buystifflers.com/subframe-con...
Driveshaft Safety Loop buystifflers.com/driveshaft-s...
Join this channel to get access to perks:
/ @brew2lfoxbody
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
WANT BREW2L DECALS? www.shopbrew2l.com/
LINK TO SHIRTS: / @brew2lfoxbody
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.to/BREW2L
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.com/user/1271816...

[@EnragedSeaCow]

My dad was a mechanic and didn't teach me anything, i would try to learn and he told me to be a nurse like my mama. I'm doing my first build and learning what i can from channels like yours and many others. It made my heart swell when you asked your little girl "Wanna weld"? My dad would never, you have a great little family Brew. On to get me some subframe connectors

[@SuperThugnifacent]

He prob didn't want you to do it as a career cus that sucks doing it as a hobby is more rewarding

[@BREW2LFOXBODY]

Thank you for taking the time to share your experiences with us. Reading a comment like this is humbling and reminds me to keep the kids engaged and continue to teach where I can. Thanks brother.

[@jcnpresser]

Your dad was a smart man, lol. Seriously this trade sucks these days. He probably saw where it was going. I tell my kid to drive out work on trains, that’s what he’s into, just don’t work on cars for a living, it beats the crap out of you and you make change compared to what the dealership makes you work in.

[@CollideFan1]

Same here except he wasn't a mechanic officially but did it as a hobby. He built up cars and trucks from the 60s and early 70s and didn't show me anything. I learned more about cars working at the local oil change shop. What I learn these days is from channels like this. Teach your kids the basics at least, when they're adults, it'll save them money on repair bills if they can make the repairs themselves.

[@ogsuperflygarage]

Memphis did an amazing job filming Brother! Awesome work installing the subframe connectors too! Let’s get to that race!!💯👊🏾

[@BREW2LFOXBODY]

Thanks brother! I’ll make sure to tell her 😎🙏

[@ThaSilentOne420]

Happy for Andrew and Berger . Both put in alot of work for content on the channel . I know im so ready for this race between the 2 . Im excited to see how the upgrades on Bergers car worked out . Anyways hope all is well with the family and in the stables. 💚💚💚💚💚💚💚💚💚💚

[@BREW2LFOXBODY]

Thanks brother! The guys have really helped out around the shop and provided some different content for the channel lately

[@IamBlackMagic03]

Gotta say man i love your channel. I didn't have anyone to show me how to work on cars growing up. Now im older and everything ive learned is due to friends who are mechanics and channels like yours. My 3 mustangs and me appreciate channels like yours. Keep up the great content.

[@jaysonescoe5799]

Great Dad right there. Man!! You and Ms. Brew2L should be Proud Parents!!!

[@lorollinls]

My man rockin’ the Great White at the beginning! 😎 Too Cool…

[@rwk673]

Love the LX taillights on the GT Fox bodies. That was a popular “upgrade” in the early ‘90’s

[@bama_5.051]

The best camera person u could ever have..Great video young lady..the sneak peak was in my part of Mexico 😅

[@BREW2LFOXBODY]

Thanks, she wasn’t too happy to begin with but she enjoyed it I think. Lol. Yeah you know that spot 😁

[@FORDMAT77]

She did great filming and seems to be interested in helping out. The fellas have really got the bug, looking forward in seeing the continuing effort.

[@wombatonsteroids]

Just installed some MM connectors in my stock Foxbody a couple weeks ago. Very noticeable difference in ride quality, it's so nice not having the car creak and groan over bumps now. Really looking forward to doing more to the suspension later, planning on doing the full "kit" front and rear. Was also my first time welding, came out good - I will mention there's a couple tabs on the passenger side that run very close to the OEM fuel lines that can be very intimidating. Thanks for all the helpful videos, have a good summer.

[@edjackson4389]

I got Stifflers mom to help me firm things up 😎

[@lorollinls]

Best comment on here lol 🤣

[@THE-SHOP]

Yup my hatch back is cracked. Just put in subframe connectors now I have to weld up the cracks before paint. 👍🏼

[@ReggieJobe]

I know I haven’t made a comment in a long time but me and my 10 year old daughter always enjoy watching your videos. Hell I really believe my daughter enjoys watching your videos to learn how to drive a manual. I have a 2010 Z06 6 speed and out of nowhere she says dad I don’t want to drive the Malibu no more I want a learn how to drive the corvette. So I asked her what made her decide to ask me that. She said our buddy on tv that has all the mustangs drives sticks. All of his cars are sticks😂😂. Hell she’s coming with me to Augusta, Georgia to purchase my second Mustang. I already have 89 Mustang GT Fox body that I’m restoring and now gone out to Georgia to purchase my second one. It’s a cobra replica a beautiful, teal green five speed manual. It even has the replica cobra rims on it. but anyway me and my daughter always enjoy watching your channel with you and your family. I don’t know if you remember but I’m the guy they always said you need to run for president😂😂😂. I’m not gonna hold up too much of your time so keep doing what you’re doing, brother me and my family love watching your content because we see the passion you have for your craft. So much love and respect from the Jobe family and once again BREW2L for President 💪💪❤🇺🇸 We the people of America deserve a real president😂

[@jcnpresser]

Man I gotta say, I’ve had two hatch back gt’s foxes, now I’ve got a 95 gt and it feels so much more rigid than the foxes and my rear sway bar is gone. Don’t even know if they do much of anything, now the newer car does have lowering springs on it but yeah, it feels tighter, like just cruising over small bumps or road irregularities. It doesn’t have that wiggle the foxes I had before did. Should probably put some on my new car. Thanks again

[@theANGRIERone]

Side note to this video - I worked the registration tent at Motor City Foxfest with the woman who tied the straps down in your video a few weeks back. Lol Small world.

[@paulhudgins5120]

Awesome job, Memphis did a great job videoing, keep the awesome stuff coming.

[@brokentoolgarage8609]

Very nice! I got that style subframe on my car and wow it made a huge difference in how the car felt. I am pulling way more cornering g's (on track) that one should ever do on street with those style connectors

[@marks93cobra]

I made some full-length subframe connectors using plans I found on the internet years ago...1x2 .120 wall rectangular tubing... I can put a jack under the very front of the connector and get the entire side of the car off the ground. If you have a welder, I highly suggest building them yourself, they'll be better than almost all of those aftermarket ones (that are NOT full length)...just my opinion... other than that, nice job on the vid Brew2l.

[@johndoe-zb8bm]

Thanks, Memphis, for helping out your pops! I appreciate the videos and how to's!👈💯

[@BREW2LFOXBODY]

Thanks brother

[@o.mtopprint8687]

Man That Last Clip Made me anxious for your next video 😮😂🙌🏻🙌🏻🙌🏻

[@jlem8968]

The sub-frame connectors help a lot on T-top cars, you can feel the difference

[@alexirodriguez9121]

On both foxbody convertibles I've had, I can tell the difference driving the car after installing subframe connectors. Feels like the car is more solid and the doors sound different when you close them. Recommend this as one of the first upgrades, even for a stock daily-driver/cruiser.

[@natet1227]

I run the same subframe connectors on my 85 T-TOP GT. They fit great 👌

[@MichiGanjaMook]

Lets gooooo. Awesome video and camera work. Dad and daughter getting it done.

[@johnfoskey7855]

Heard some slsughter up all night at 4:42.. nice

[@brighton1931]

Always a good time for brew2l

[@jplperformance9073]

Definitely getting the fit system from stifflers

[@ShaneHerald]

i put sub frame connectors on my 85 t top ....and man i tell you what ,...i could feel it in the way it handled at highway speeds for sure man ........even at slower speeds when cornering hard and giving it more you could feel how much more stiffness wuz in the car man

[@jlem8968]

I've done two T-top cars, night and day

[@ShaneHerald]

@@jlem8968 it certainly surprised me! i think mostly cuz everyone said you won't even tell a difference it will just keep you from twisting the car. but yep night and day for sure..lol

[@gr8tfoxes617]

Hooking up my daughter’s 92LX hatch with sub frame connectors this weekend! The suspension just doesn’t work as well without them especially a lowered car with poly bushings. 👍

[@scottjohnson1210]

And as always thanks for filming

[@nexgencarguyscraig331]

I've had my stifflers FIT kit sitting in the box for the last 6 months. I can't wait to get them on

[@pimpovic2]

Time sure flies. I remember Memphis coming out into the attached garage to "help"when she could barely talk and you didn't have your shop. In those base idle reset days 😅

[@joshmaddox5682]

Great job Memphis

[@chrishinton1459]

Can't believe how much Memphis has grown still remember years ago when she was cutting rust off the classic with you

[@BREW2LFOXBODY]

She’s definitely growing up too fast. 🥹

[@TheChiefsGarage-lr7hy]

Great video!

[@cleonclink6811]

That race is gonna be so good!

[@fordaith]

I wanna do that FIT kit on my convertible SOOO bad. I feel like that, the torque box reinforcements, and a K brace will tighten the chassis up really nice.

[@thesandwich9000]

I want to as well but you have to cut some stuff near the torque box to install it on the vert I think

[@anthonygrebner]

​​@@thesandwich9000 Put torque box reinforcements in my vert last year...even recorded portions for KZbin purposes but have yet to edit and post. You have to cut the spot welds and remove the rivets holding the rear seat support then it's just like a coupe.

[@334waterboy]

Cars coming along good. Saw it on the circle the other day.

[@BREW2LFOXBODY]

He loves driving the car. I think that’s awesome 😎

[@michaelburger746]

Thank you!

[@lamarrichardson1782]

Good stuff man

[@hotrodray6802]

🔔😎 The subframe connectors that we used to manufacture and sell had about a 3* bend in them so that they fit tight on each end and against the seat supports. Were made to fit a brand new car that wasnt tweeked. No gap welding needed. **** BTW when this video posted it said 19 minutes.. yet there were comments 4 hrs old. YT is still not notifying me of any of your new ones. 🤔

[@hotrodray6802]

11:15 PM YT just notified me that this video came up 13 hrs ago. SMH

[@tonycaudle]

Jesus I don't know if I just been out of it for a long time or what but them subframe connectors are huge compared to the old kenny brown ones I have on mine. I think I want to update mine now

[@automotiveaddiction428]

Broke the rubber around my clutch cable...cable and shipping to Canada is expensive.didnt buy one yet it's gonna stay like this for a bit.just right in the middle of buying a house...daily driving my 85...piece of rubber and hose clamps keeping it together.

[@youtubeuser5424]

Now you need that JBL sponsor lol

[@paul44235]

We're you using flux core or gas?

[@wpboss9805]

What settings did u use for the welder?

[@tylersparks6059]

Hey man i love the videos and I've been learning a lot because i got a manual fox as my first car! But i need some help and maybe some recommendations/videos i can look at to help with my no start problem I've been having. It will start and make a very few combustions and then quickly go out and I've been stuck for a minute on what it is and i just cant seem to figure it out so i was hoping you could lend some knowledge to me. Thanks!

[@lewis8281]

I'm about to order some subframe connectors for my convertible. I was looking at stiffler's or maximum motor sport

[@dennis17116]

First and only thing is get a turbo kit. The rest is minimal.

[@ilike9s]

We still love ya Memphis. Stifflers in da house.

[@FOXBODYCENTRAL]

Does being raised up in the air on the lift cause the body to flex differently then just sitting on all 4 tires? Is that why the gap was there ?

[@benwebster3930]

They say you gotta lift the car by the tires to get the subframe connectors on right. Is this true or not?

[@AndyA60440]

Sorry for a critical question, but I thought that the car should be supported on the wheels with the suspension loaded when welding up subframe connectors? Supported on the frame the body could be flexed differently than if you were going down the road, and you want the car frame locked in position like it would be tracking on a flat surface. I saw you have the suspension hanging. I watch a bunch of your videos, and I figure you've heard this said before, so what gives? Is your opinion that it doesn't matter?

[@brentjohnson8430]

I have a red Foxbody and I like the wheels on the retro fox what are they?

[@SvtVenom]

Got any coupons from Lmr? I'm trying to get a set of fuel injectors for my obs lightning lol

[@curtismccombs2212]

You look tall as heck with her recording! 😅

[@staggsrl1]

i thought i was the only one who steps on my gloves

[@anthonyl9566]

120 or 240v welder necessary for cars?

[@anthonygrebner]

120 is plenty.

[@zyrabell69]

Nice video, I'm having subframe connectors installed on my 1989 LX 5.0 convertible. If any Fox Body needs them the most I would say it's verts and ones with T tops, followed by hatchbacks. But even sedans will see benefits as well. On another topic, I'm restoring a 1987 Mustang GT convertible, which was sold with AOD transmission. My LX is a 5 speed and for me, the auto GT is for my wife. Has anyone released an improved and/more modern automatic transmission that has more gears, etc? For example, my new Ford Explorer has an automatic with 10 gears so it maximizes the engines power band. I know many people switch AOD to 5 speed. But having only a 3 gear auto with the 4th being overdrive is definitely a bit dated. Thanks

[@anthonygrebner]

There are adapters to put a 6r80 behind an SBF.

[@Drives88]

Hey what is the size of the wheel/tire on Burgers stang?

[@BREW2LFOXBODY]

18x9 18x10 Not sure on the tire sizes. I’m sure he’ll pop in and answer though

[@michaelburger746]

285/40/18 Mickey Thompson E/T Street SS on rear

[@shelby64289]

Is burger and andrew your sons?

[@chidrole]

👍🇨🇦