"Foxbodies would hook in a mud puddle Back in the '90s"

[@matthewvarnam4302]

If you had a s10 you could get away with just Double adjustable shocks and Caltrack and using the stock Is leaf springs....there's been people into the 7's. in the 1/4 mile with this Set-up it just works

[@Rustedfox1287]

Any time guys! If I got something it’s always up for grabs to a fellow fox guy! Thanks for the shout out -Shay-

[@isaacowens283]

Glad yall made it thru the storm!

[@BREW2LFOXBODY]

Thanks! Luckily it wasn’t too bad here.

[@ogsuperflygarage]

Good video Brother! Hope everyone is ok and that the storm damage was minimal. 🙏🏾 Good info on the relocation brackets! 👊🏾

[@paul44235]

That's what happens when you build horsepower before building the car to handle it. Not judgmental, but lower control arms and at least welding stock torque boxes and subframe connectors are a must. Good luck and looking forward to future mods!

[@jaysonescoe5799]

They being kids!! Glad y’all made it though ok!! My area could have been worse! Prayers to our northern Neighbors!!

[@matthewvarnam4302]

Yeah I watch a lot of kenin wilson videos he does a very good job at explaining Anti squat and how to make things Separate and Center of gravity all kinds of videos.

[@automotiveaddiction428]

I have to spend lots of money and start rebuilding my 85. Didn't realize how bad it was...just moved..the guy that lives behind me has a mint condition 85..so I need to fix up mine a bit.

[@DoesItTho]

Hope the storm work OT means sweet new Stang toy installs!

[@feellnfroggy]

What the heck is chicken legs wearing. I never seen that bright a blue, even on a clear spring day in Alabama. lol

[@lew_will]

They were my aftco shorts, don’t have me a foxbody yet but we can foot race if you want to and we’ll see what these “chicken legs” can do 😂😂

[@feellnfroggy]

@@lew_will lol. I haven't ran since the army. But when I did it was 2 miles in 12:30. Lol. I'd lose a foot race with a mannequin now.

[@lew_will]

@@feellnfroggy lol glad you’re enjoying the videos, stay tuned for the next one!

[@brokentoolgarage]

Good stuff! That is the same trick I use on the armrest bolts.

[@jcnpresser]

I got those brackets. Shoot, I fully welded those suckers in. Better safe than sorry. The weight jackers bar work well with them. You can adjust your ride height with them. Heck I had to buy stock springs just to use the lower bolt holes. They work freaking awesome though. They pick the car up for sure.

[@jorgevillagomez3211]

I always wondered what it is that you do for a living? That’s a lot of hours

[@jimmyjamesgarage3290]

Hope you and your family are all safe from the storm. Definitely thinking about you guys.

[@BREW2LFOXBODY]

Thanks so much brother

[@jonkintner1638]

I had south sides on my 89 coupe. Definitely pushed the tire hard in the ground. Put 4 degrees on pinion angle in it will definitely hook in dirt.

[@FORDMAT77]

This is something I need to add, the relocation braket. I put UPR everything on rear-end and double adjustable shocks on my Fox

[@OscarR-f1d]

Lakewood 90/10s up front, UPR rear control arms, and 26x10 Mickey. It was figured out 30 years ago 😂 If it ain’t hooking swap drivers.

[@bsbs5.0]

I cut my rear springs and cut one full coil off basically a cull circle off the coil and it drops 1.5" of ride height

[@user-wb5mz2xr6q]

Nice

[@bryanbennett4221]

Hey where did you get thouse mid legnth headers that are on the motor on tha stand

[@aidenr850]

Lol Shay is my dad 😂

[@BigKidsRC]

getiing the stang done!! great work guys.... First🦊

[@ThaSilentOne420]

💚💚💚💚💚💚💚💚💚💚

[@chadperry3579]

What radio is In the white gt is it a double din and how does it fit thank u

[@imichaelburger]

It’s a pioneer double din. It fits great.

[@feellnfroggy]

Soft suspension, softer tires, course rockier asphalt, more sidewall with 16 inch rims. It was factory poor mans dragsetup.

[@BREW2LFOXBODY]

Exactly 👍

[@jsstrawder]

And most cars made no real power lol

[@ronniehyser5.0]

Great content, even though he didmt film it all

[@bsbs5.0]

better than nothing and getting the wrenches last rotation to right is more important than making a video

[@hotrodray6802]

🔔😎 YeeeeHaaw!!!

[@ronniehyser5.0]

Hey bro, i have a 1992 fox. 331 stroker, i have the first sniper system, ive had the ecu go out once snd i think it went again. Im thinking of sending it to holley and getting it replaced then selling the whole system and going carb. Im a novice mechanic. Im not sure what all i need to switch over and what i can keep from the sniper system. Like the intake. I have the hyperspark ignition. I know this is a hard question because theres lots of variables, but any help would be appreciated. Im hoping the sniper will pay for alot if the change over. Last time the ecu went up. I sent it to a Holley certified mechanic and costs me $2400 I cant do that again, on the bill i saw just to change the plugs it was $240 smh. Plus they did the work and didn't even lmk how much they estimated cost. Thanks bro i appreciate your content.

[@BREW2LFOXBODY]

That’s not a bad plan. I love carburetors even though they have their own issues. Probably just a good regulator like in the video I used on the 65.