Blue Yeti Microphone Not Working | How to Replace a USB Port

I bought a Blue Yeti microphone from someone locally for only $20. She said it was brand new and just didn't work. Since these microphones retail for over $100 I figured it was worth a shot to try and fix it. In this video, I will show you how I replaced the USB port on the Yeti Blue and ultimately was able to get a working microphone!
Here is the link to the replacement USB port - amzn.to/3nEphic
Here's a link to a replacement USB cable - amzn.to/3evSo8R

[@angstyrain]

Thought the port was loose and i found a broken pin instead. This video was a huge help because my mic has been broken for like 3 years.

[@CarolinaCowboys]

Awesome!

[@hestheMaster]

This is a common design flaw when moving the microphone around with the mini B USB cable plugged in. There isn't any plastic to keep the metal from bending and making the connection loose. After fixing/ replacing the female metal case to hold the cable in I would also buy a 6" extension cable which then you could enlarge the microphone base USB slot so it accepts the male end of the extension and use a piece of black tape to hold them together. You could then put back together the microphone cover and use the other end of the short 6" cable which has a female mini B USB end covered by rectangular plastic which will allow you move the microphone with no more damage.

[@CarolinaCowboys]

Yes it seems like a very common issue with these microphones in particular

[@krxlla]

you dont understand how many hours Ive been trying to fix this problem, and all it took was this simple video that popped up on my recommended, thank you for saving my day!! :)

[@CarolinaCowboys]

Haha, glad to help!

[@vincentsonoma]

Thanks for this! I am not much of a DIY soldering person, but would be happy to donate mine to someone to fix in order to keep it out of a landfill.

[@CarolinaCowboys]

You could try getting it replaced under warranty first

[@QTheMost]

Thats awesome!

[@torrydelong3973]

Do you sill have the microphone, because I would love to have it to fix and use.

[@jeremymorrow9477]

This happens to a lot of Blue Yeti mics. The cable that they provide is an awful choice. When the microphone is angled down, the cable bangs into the back of the microphone mount, which bends it sideways, breaking the USB Mini B male end and, at worst, destroying the inside of the Mini B female port. The solution is to purchase a USB A to USB Mini B cable that is right-angled instead of straight. Amazon Basics sells these for $5 or so and their low profile won't cause the port and cable to be smashed every time you angle the microphone down.

[@CarolinaCowboys]

I agree!

[@sarbearr4]

My mic button just broke, thank you for helping me fix it! ❤

[@CarolinaCowboys]

You're welcome!!

[@RimauriComposer]

Very fantastic work! I love see that mike open!!! Thank you so much for your video^^

[@CarolinaCowboys]

Glad to help!

[@kandy5129]

This helped me so much. This was my only microphone i had. I bought a new headset with microphone just because this one didn't work. Now it does. Thanks

[@CarolinaCowboys]

Great to hear!

[@stephennettles2309]

Blue is actually the company that makes the microphone. They're a very well known manufacturer of microphones for music recording. They might have a deal with Logitech but Blue is the brand not the model.

[@wsjudd]

Blue was acquired by Logitech

[@CarolinaCowboys]

Thanks!

[@shellyroder2910]

thanks for this - heads up that the warranty lasts 2 years from time of purchase. They were extremely helpful and responsive with warranty - I got mine replaced in under 10 days, from watching this video to holding new mic! Going to order the extension cable - that's a solid piece of advice to keep this mic port safe and sound. Thanks for your help!

[@CarolinaCowboys]

Great to hear!

[@muaviya624]

@@CarolinaCowboys Hi, thanks for the video, can you please provide me an Amazon link of the USB port that I can use with this.

[@CarolinaCowboys]

@@muaviya624 Hi The links are in the video description

[@muaviya624]

@@CarolinaCowboys Sorry I meant the USB cable for Blue Yeti. Can you please give me an Amazon link of the USB Cable that fits into Blue Yeti?

[@CarolinaCowboys]

@@muaviya624 Here you go, I will also put this link in the video description - amzn.to/3evSo8R

[@juseniah]

Thanks for the helpful video. I'm struggling to remove the last bit of the pins using solder wick. Got any tips?

[@CarolinaCowboys]

Try using a solder sucker - amzn.to/325lJOg

[@angstyrain]

Solder suckers are definitely a better choice and easier to use

[@anngutboss]

Hi! Thank u for this. I just created a support case on their web. How long did they take to answer you?

[@CarolinaCowboys]

It was pretty quick

[@adlaneredcarbon6043]

Thank you for this video, could I know which diameter of solding wire should we use please ?

[@CarolinaCowboys]

Hello, I went with a 0.022" (0.56mm) multicore solder

[@dansaxton2022]

Hi Carolina Cowboys - that part number from Digi-Key (A107788-ND) looks like it only has 2 mounting pins - did you use that part of the ones from Amazon in the end?

[@CarolinaCowboys]

HI, I would go with the one on Amazon because there were 4 mounting pins and only 2 on the one from Digikey. Good luck!

[@jassingh3853]

Thank you! i spent an hour trying to install Yeti programs on 2 different macs and could not get to to work. Changing to a phone cable did. Really disappointed that with a brand new Yeti X this is still a issue.

[@CarolinaCowboys]

I was going to say try a different cable because it does seem that the cable needs to have a longer metal end.

[@LusitaniaFilms]

Hello There :) Thank you for this Video. I Knew that was the Problem BUT didn't know where to buy that part. my Mic looks like yours BUT it's was Bigger BUT they have the same components . I just ordered that part from Amazon. again. Thank You Buddy.

[@CarolinaCowboys]

Good luck with the fix!

[@LusitaniaFilms]

Thank You Sir. Parts arrived and it's now fixed. and WOW it sounds Great. Have a Nice Day.

[@CarolinaCowboys]

@@LusitaniaFilms Awesome!

[@carmennoemiguzman9873]

I have a blue yeti under a year old but I don't remember if I registered it?! I pulled the cord and now it doesn't work. Thank you for this video, it really helped! I will see if I can actually get it replaced or at the very least fix it. All the best!!

[@CarolinaCowboys]

Good luck!

[@carmennoemiguzman9873]

@@CarolinaCowboys I'll let you know! Thanks!!!

[@WuDzej]

@@carmennoemiguzman9873 how did it go?

[@chromaticstudios_]

Do you think y u can send me the links to the supplies you used? And also, what’s the correct way in Fixing it? If you don’t mind telling me

[@CarolinaCowboys]

Hi, basically you just need to replace the USB port. Here's the link to the part - amzn.to/362MlA7

[@FairyFrequency]

Thank you! Our Yeti just broke today. Hoping to bring it back to life.

[@CarolinaCowboys]

good luck!

[@eWhizz]

A solder sucker or flux and solder wick is certainly key to removing the old connector. Either then add a USB socket on a cable, rather than another USB-B mini pcb mount, or potentially a beefier version of the same socket.

[@CarolinaCowboys]

Ya my solder skills weren't the best when I shot this video

[@charlesdeanwestling3811]

When you filed for your replacement, how did you provide a proof of purchase? I also bought a broken one locally, and would like to try and get it replaced before I tear it apart.

[@charlesdeanwestling3811]

UPDATE! They needed no proof of purchase. My mic, which I got for free from a local buy nothing group, was still under warranty. After a little back and forth they are sending me a brand new one. Good deal.

[@CarolinaCowboys]

They should replace them for free, it's basically a recall for faulty USB ports

[@kirakitts2104]

@@charlesdeanwestling3811 how did u request your refund. i was told 2 call but the number is no good

[@Alexssio]

Hi ! It's possible change with a type-C port ?

[@CarolinaCowboys]

Unfortunately no, the PCB would have to be changed.

[@WifesKitchen]

I have the same issue. Thanks a lot

[@CarolinaCowboys]

Happy to help

[@WifesKitchen]

@@CarolinaCowboys Guess what, I got my mic also replaced under warrently and it's on the way. I would not have even attempted to place a request unless i watched your video. So once again thanks and You saved me $100.

[@CarolinaCowboys]

@@WifesKitchen awesome!!!

[@xXxannihilaterxXx101]

I wonder if there is a way to buy the back piece motherboard that you fired only?

[@CarolinaCowboys]

Well that is probably the most expensive piece besides the microphones. I was just learning how to solder when I did this video and I'm pretty sure I melted it. :-)

[@torrydelong3973]

When you registered it, did you have to have a receipt?

[@CarolinaCowboys]

Yeah

[@TypicalAsianWilsonz]

i have a problem so basically the yeti mic plugin thingy when i try to plug it in i realise 2 plugin is keyboard and my mouse but there isnt plugin for the yeti

[@CarolinaCowboys]

If your keyboard and mouse are wireless you an configure them to share the same USB

[@TonyTatar]

hi just wondering if i send my broken yeti back will they repair it under warranty? idek whats wrong with mine the pins look fine but i think its the cable thats faulty but not sure, it was working okay ish earlier had to unplug cable and reinplug many times to get into a specific condition but when i put in now doesn't work at all, i believe its a cable problem

[@CarolinaCowboys]

It's a very common defect in these microphones. Just call them and they likely will just send you a new one without having to send yours back.

[@nvious1208]

@@CarolinaCowboys what if i have no warranty😬😬😬

[@CarolinaCowboys]

@@nvious1208 Then they won't replace it anymore

[@olliethomson9641]

Some of the pins are bent in mine, not to mention the port can move out of the spot, do I have to go through this process or can I open up a ticket straight away?

[@CarolinaCowboys]

I would open a ticket first and see if you can get the whole thing replaced for free. If not then go down this path of pain.

[@DarrellGrainger]

It would be easier to remove the old USB mini port if you use a solder sucker. You heat the solder until it starts to melt then use the solder sucker to, literally, sucks up the liquid solder. A solder sucker is around $5 to $10 and can be used over and over. It also means you won't be applying so much heat to the board and potentially burning out the other circuitry. This way the holes on the circuit board will also be clean and easy to install a new port.

[@CarolinaCowboys]

I agree! I think I burned mine to a crisp.

[@LeGeeked.]

I have a couple of questions, if you woudknt mind answering these How can I start this? I’m 16, and have never soldered anything. I don’t want to ruin the mic to potentially never being used again. What tools are used here? And where could I get them? Do I need anything specific? How much would these tools cost? I’m not balling in the funds department, so if you could give a estimate that would be lovley. And what exactly are we doing here? I don’t get the process

[@CarolinaCowboys]

Yes?

[@LeGeeked.]

@@CarolinaCowboys I’m confused

[@ProsASMR]

the red light is working but the mic is not working should i replace the port and will it then surely work ?

[@CarolinaCowboys]

It's a very common problem so if it's not working you could first try a different cable before fixing the port.

[@imanidiotbut8424]

I don’t know if you still reply to comments but mines been broken for a good few years and I tried to fix it today but nothing is visibly broken, the port is positioned correctly isn’t blocked and the wire is fine however, when plugged in, the light doesn’t glow and My pc detects no input at all (not even as an unrecognised device). Any suggestions or do I just buy a new one/ send it to get fixed?

[@CarolinaCowboys]

Hi, first thing is to try a different USB cable, if you're lucky the cable is bad. But if that's not it then your USB port is bad and if you contact Blue they may replace the mic under warranty. Good luck!

[@imanidiotbut8424]

@@CarolinaCowboys it’s definitely the latter unfortunately. Thanks anyway for replying so quickly.

[@chaserproduced1822]

do you have another link it says its out of stock and they wont be getting more

[@CarolinaCowboys]

Thanks for letting me know, I updated the link.

[@bolzichy4186]

My yeti is doing something really weird. The USB isn't messed up or anything because when I plug in my headphones I can hear audio from my computer and when I talk I can hear myself through the mic and it sounds fine. But when I record myself the mic audio is all messed up and makes noises that sound kind of like a fart. I have no clue what the issue is. I also tried using different cables and plugged the mic into another computer and it still is doing the same thing. What's weird is when I have my headphones in I can hear myself like a live playback of my voice from the microphone and the quality sounds fine. I'm so confused why its doing this. Any help would be much appreciated.

[@CarolinaCowboys]

Check the audio settings on the computer, the recording settings should point to the Yeti microphone.

[@RamakrishnanRukmini]

This is to adjust your setting in real time live.

[@shogiten]

Hey man this usb port i got has 4 legs, and the yeti pro has only 2 holes for the legs, do i just snip them off?

[@CarolinaCowboys]

Do you mean the mounting points? Yes, as long as it's not the leads that solder to the board

[@Jim-K-Baker]

How did you get a warranty if you weren't the original owner. Is it because they did not register it?

[@CarolinaCowboys]

Could be!

[@TheDainerss]

This process no longer works. Probably because too many people abused the system, the creator of the video included. Warrenty replacements now requires proof of original purchase from an authorized seller (must be a new purchase), as well as photos clearly showing the damage. They will not just replace your mic so easily anymore. Especially if you have opened your mic and proceed to destroy the IC board by burning it.

[@CarolinaCowboys]

Taking apart electronics usually voids the warranty

[@Will-xl7xp]

The stock wire that comes with the mic is not the best length- kinda short, my port eventually got tugged and broke a pin

[@CarolinaCowboys]

That's how it happens every time. I think it's so common they must have a used a cheap USB connector

[@one.ebrown]

Im having an issue where the stand that it comes with doesnt keep the mic itself stable. It flops back and forth from the slightest tap even after twisting the sides too. Pls help

[@CarolinaCowboys]

Hi, the mic is tightened by the side screws and there is a round plastic washer in between the mic and the stand. Make sure those parts are there and they are aligned properly.

[@DanielCS816]

hello, i ordered this microphone from amazon and not worked, so i got refunded all my money and they let me keep the microphone, i opened the microphone and first of all I found a red liquid that looks like glue on each screw of the board, in some making contact with the components, I suppose this caused permanent damage or is it repairable?

[@CarolinaCowboys]

The red liquid is probably threadlocker which is designed to keep the screws from loostening. The issue is typically the USB port that becomes loose with then cable is pulled. I put a link to the components in the video description you could try to repair it yourself

[@loofy1778]

How did u get yours replaced like what website

[@CarolinaCowboys]

Here's the link to buy the part - www.digikey.com/products/en?keywords=A107788-ND

[@DamianMooruth]

He means what site for the warranty

[@sou_agua]

FYI, the amazon link you shared is not the correct part. The tines are not right angle, but flat.

[@sou_agua]

The correct part is: www.amzn.com/B07SQW52PN

[@CarolinaCowboys]

Thanks for pointing that out, I've corrected the link in the description.

[@J_Nunu_L]

where do i go to register my microphone to be able to get warranty services?

[@CarolinaCowboys]

Check their website www.bluemic.com/en-us/products/yeti/

[@user-fm3hg4tz7h]

wher i can buy this usb slot?

[@CarolinaCowboys]

Link is in the description of the video

[@BlastingFun2007]

Where do I go to ask for a replacement

[@CarolinaCowboys]

support.bluedesigns.com

[@jocelynscofield]

what is the part you bought called?

[@jocelynscofield]

@@CarolinaCowboys thank you!

[@CPClips]

@@CarolinaCowboys it says it doesn’t ship to us do you have another

[@CarolinaCowboys]

@@CPClips Here you go - amzn.to/362MlA7

[@markstpierre]

@@CarolinaCowboys 11/25/2020 it says "currently not available". Any other suggestions?

[@CarolinaCowboys]

@@markstpierre It looks like there's a shortage. I found this one as an alternative - amzn.to/3pX3bcW

[@elijahbeyersdoerfer283]

my blue yetis plugin part is loose and can come out how would i fix that

[@CarolinaCowboys]

Try changing out the cable first

[@elijahbeyersdoerfer283]

@@CarolinaCowboys it was not the cable I took the thing apart and the port was able to be taken out

[@eWhizz]

The braid is moved whilst you keep the iron still above the spot you wish to remove solder from.

[@CarolinaCowboys]

Ya I figured that out afterwards

[@writerinrwanda]

Major design flaw with the Yeti USB port. The screws either side that hold the mic stand in position get loose really easily and if the mic swings back against the stand it bends the USB port like this. Just done the same with mine 😔

[@CarolinaCowboys]

They should have recalled them!

[@writerinrwanda]

@@CarolinaCowboys It's a shame because they are a really good mic, it's just that part of the design is a real issue.

[@CarolinaCowboys]

@@writerinrwanda Yeah

[@Nanao_.]

The problem is that I don't have that equipment. I also do not know how to use them, so I'm stuck here being charged over half the price of my mic JUST to replace the USB port which costs 3 dollars. 😞 What should I do?

[@CarolinaCowboys]

I would contact the manufacturer, they will likely replace it under warranty.

[@eWhizz]

I would also add some hot glue around the USB connector to add more physical strength to it.

[@CarolinaCowboys]

Good tip!

[@Christian.Ribeiro]

all of mine is messed up

[@Christian.Ribeiro]

HEYY you helped me so much they sent me two by accident 😂😂

[@writerinrwanda]

Only thing - mine is also a Blue Yeti, but there are no screws on the bottom. Can't figure out how to get into it.

[@CarolinaCowboys]

Try doing everything else in the video, take off the knobs and the rubber piece on the bottom, there may be a screw under there.

[@writerinrwanda]

@@CarolinaCowboys Thanks. Found them. Different model. Screw under label in centre, but everything else the same. Lovely technician got it working again. Thanks for the walkthrough.

[@philipermish5703]

I was expecting it to be fried XD

[@CarolinaCowboys]

My amazing soldering skills at work!

[@kamranvideos662]

Heyyy, OK I really need help. My blue yeti just randomly stopped and it is clearly on, but it won’t connect to windows meaning it’s plugged in but it doesn’t go onto my pc and I can’t even use it. My blue yeti is working but not going onto windows; you can help me or find someone else to, please find help.

[@CarolinaCowboys]

Sounds like your USB port is bad

[@kamranvideos662]

@@CarolinaCowboys it’s on but it doesn’t go on my pc

[@kamranvideos662]

@@CarolinaCowboys do you have discord so maybe you can help me?

[@kamranvideos662]

@@CarolinaCowboys I’m available Sunday 10 or 11

[@nvious1208]

How much would it cost to get it fixed with no warrenty

[@CarolinaCowboys]

Probably more than it's worth. You could try an electronics repair shop.

[@nvious1208]

@@CarolinaCowboys thank you🙏🏼😁

[@eWhizz]

See the bottom half of the casing at this point in the video. kzbin.info/www/bejne/eHS2o4ivbbuAkLM That is a perfect location for a much better USB-B connector to be mounted. There is nothing behind this inside the micrphone.

[@CarolinaCowboys]

I totally agree!

[@laidbackstream2629]

Did this and no warranty because of outdated purchase. I have the pro version. Tried replacing the usb. No luck. Now I'm down 112 dollar on kit and no microphone..

[@CarolinaCowboys]

That sucks, I wish they would have done a recall because of so many of the same problems

[@laidbackstream2629]

@@CarolinaCowboys ye probably why they don't 😂🤔

[@vaipre1576]

Yeah I need a new mic altogether because cats ain't gonna cut it pulling out my cable constantly :)

[@CarolinaCowboys]

If you have cats you will probably have the problem no matter what mic you get. :-)

[@nickgarcia12]

what did you say to offerup

[@CarolinaCowboys]

Unfortunately nobody wanted to buy a broken microphone

[@nickgarcia12]

@@CarolinaCowboys no i mean what did you say to support to get a new one because my i tried this and they said something way different

[@CarolinaCowboys]

@@nickgarcia12 I told them that I wanted it to be replaced under warranty and they said ok

[@djdarq6311]

I must have a newer model. Mine is the same with NO screws at the bottom

[@CarolinaCowboys]

check to see if there's a rubber piece hiding them

[@matthisonthegamer6167]

3:30 us removed

[@CarolinaCowboys]

I must have edited out the B. :-)

[@JBullyy]

Can I ship mines to you for money to replace my USB port?

[@CarolinaCowboys]

You should contact the manufacturer and you can probably get it replaced for free under warranty

[@double_c1157]

Get you some solder wick to make your life easy next time!

[@CarolinaCowboys]

I tried the braided kind but I'm not very good at it. :-)

[@double_c1157]

@@CarolinaCowboys Here's the trick for next time (solder expert): put a glob of extra solder on each pin, then get liquid solder flux and put some on each pin, then the braid will soak it up like water and leave clean pin holes!

[@2004gumby]

"Have to take all these knobs off", then skips how. Do I just pull with all Thor's might?

[@CarolinaCowboys]

LOL, yes basically I had to use a pair of pliers

[@pf_pfp]

my blue yeti usb port is damaged....

[@CarolinaCowboys]

Fix it

[@culdlol]

mine isnt damaged whatsoever and its still not working i dont get it

[@CarolinaCowboys]

It's probably broken on the inside, they break very easily. Try contacting them to have it replaced under warranty.

[@culdlol]

@@CarolinaCowboys I later found it its not my port that is damaged, I looked at the actual cable and I found out that my cat has been chewing on it so all I need to do is get a new cable, thank you though

[@CarolinaCowboys]

@@culdlol Oh wow you got lucky! A new mini USB cable is all you need

[@driedrasin1592]

Bro why can’t they just reinforce the pins

[@CarolinaCowboys]

It seems like a design flaw to me

[@eWhizz]

Such a crappy design for this port, and also a poor choice to use this mini connector. I almost broke mine within 30 minutes of setting it up, when I didn't leave anough slack in the cable on the moveable arm. There is quite a bit of space in this microphone and I have now ordered a USB-B full size panel mount socket, which I am going to replace the USB-B Mini plug for. They should have always have used this larger plug. This microphone has a bigger brother than uses a XLR microphone socket, and it is in this very location that I plan to put the larger USB-B port on my microphone.

[@CarolinaCowboys]

Ya I agree, and it's actually a really nice microphone with exception of the USB port!

[@Jakub2]

dude, you need a proper workspace, not that nice desk lol

[@CarolinaCowboys]

LOL, it's what I have to work with

[@NightendYT]

How did you contact logitech through email through support through phone just comment their email because mine is broke

[@CarolinaCowboys]

I opened a ticket at support.bluedesigns.com

[@NightendYT]

@@CarolinaCowboys thank you :D

[@sofiamartinez93]

Watch the whole video just to see in the end you didn’t even fix it.. you got a replacement -_-

[@CarolinaCowboys]

I showed you how to fix it, unfortunately my soldering skills at the time were below par

[@erikfrits6553]

I bought Blue Yeti X and 2 weeks later either my USB port or USB cable is broken. 1 little movement and it shuts off ... such a rubbish quality

[@CarolinaCowboys]

I agree! Call them, it should be fixed under warranty

[@CO_Yeti]

this seems like way to much work

[@CarolinaCowboys]

It's not that bad if you're into electronics engineering, but I definitely learned how bad I was at soldering.

[@tiana5271]

My stupid cat mightive broken my blue yeti she chewed the cord

[@CarolinaCowboys]

In that case you might be ok just replacing the cord!

[@tiana5271]

@@CarolinaCowboys yeah I know! My cat always chews my cords she’s chewed everything she’s gone nutz so I have to hide my keyboard mouse etc in my closet

[@ErtywekPL]

i have to leave dislike because im not gonna buy on amazon

[@CarolinaCowboys]

Really? This video has nothing to do with Amazon