Bluetooth Jammer Wiring Full Tutorial

[@marianocampos4572]

Hi, I built the device and let me tell you that it works wonderfully well, I put a 20db amplifier with a bandwidth of 50hz-4ghz and it has a range of between 50m with obstacles and without obstacles the range is crazy. Thanks for sharing the video

[@kingawesomeness967]

Awesome! What specific amplifier did you use? I added the 10uf capacitors to the ground and vcc pins of the NRF24's but I want to improve everything about this even if its a marginal improvement.

[@tsacmaerd]

Thank you very much, I have buyed all components in Aliexpress , very useful 10/10

[@DivineZeal]

That is great, and good luck!

[@MygenteTV]

Bro, I'm following your shop just to buy this item from you. I turned notifications on to get this.

[@zloneOTM]

It’s open source and not even his project

[@MygenteTV]

@zloneOTM thanks for the info, so this is something you can build on your own?

[@AB1Vampire]

Me too. City knuckleheads always blasting music all day every day.

[@larrybud]

@@MygenteTV What do you mean? What do you think he's doing here?

[@DivineZeal]

I have the info for the project on my GitHub, it is only available for those who cannot purchase and to fund a bigger philanthropic project I have planned in Africa. So please make it if you can!

[@iNikiii]

What antenna is that

[@LysorngThai]

is the range depends on the type of external antenna you use? how much range you got from 10dbi antenna?

[@DivineZeal]

I get anywhere from 10-30M , it’s better without walls

[@willemcashion3579]

Can you make a video wiring it to the board

[@muralihackerefx]

One doubt I have esp32 30 pins how to connect please I want diagram please

[@VladkoPetko]

May i ask you what type of jumper wires you use female to female or male to female

[@DivineZeal]

For the breadboard you use female to male for the NRF24s

[@haithamjaradat6821]

Can you go over the code and explain it please

[@kingawesomeness967]

where can I find the PCB for this build? Am not able to find it through the link

[@DivineZeal]

The pcb is on my GitHub here for you to print yourself, they currently are not available pre-printed: github.com/dkyazzentwatwa/cypher-jammer/tree/main/hardware

[@marksstudyzone8432]

May I ask you how do you power up the whole stuff? Connecting the 2nrf originating from to same source with 3.3V? And how about the esp32? Where does the power come from?Sorry this is a stupid question but I am very new to this, thank you!

[@DivineZeal]

The models are powered from the Esp32 and the Esp32 is powered via usb. Thanks for asking!

[@marksstudyzone8432]

@ The two NRF modules are connected to the same 3.3V ? Is this only possible with a breadboard? As there is only a single pin at the 3.3V on the esp32. I am wondering how to wire the same 3.3V source to the two NRF. Thank you!

[@DivineZeal]

Yes the Esp32 has only one 3.3v pin, but you can add multiple connections to the power by connecting them to the same row. Or by chaining them together when soldering

[@rogerbarros3998]

Hola buenas noches amigo como estás te escribo desde Colombia, cómo hago para hacer las conexiones del jammer con un módulo ESP-MODULE-32

[@marka.2715]

How do you upload the code? Please do a tutorial video on this.

[@DivineZeal]

I made a full video about this will upload today. It should help people know how to upload code with Arduino ide

[@marka.2715]

@DivineZeal that would be great. Thanks!

[@ignaciojoaquindiaz9966]

Will it work with a ESP32-WROOM-32D or a ESP32-WROOM-32?

[@DivineZeal]

Hello for my custom pcb you need esp32-wroom-32D, but this you can use any of you use a breadboard or your own pcb

[@marka.2715]

I forgot to ask, how do you power this thing up?

[@DivineZeal]

You use a usb, and can plug into wall, laptop, or Portable battery

[@fixfai6244]

Please tutorial programing 🙏🙏

[@វុយហេងសេង]

Can you help me with wiring I still don't understand video

[@CipherMahmud1311]

how to use this thing can you explain more .

[@DivineZeal]

What else would you like to know

[@marka.2715]

So does this device have to be between the phone and say a bluetooth car stereo in order to jam the signal? A friend has an annoying neighbor that always sits in his driveway blasting his music and annoying everyone. My friend is trying to come up with a clever way to mess with this guy and hopefully get him to cut the volume down.

[@DivineZeal]

Yes as long as this device near no Bluetooth will work if he is using Bluetooth. If he uses a wire for audio it won’t do anything. I’d say it probably works 2-3 houses long maybe more with better antenna and clear line of sight

[@marka.2715]

@@DivineZeal We looked at your video. We think we can make one but the only thing that is confusing is how to flash it. Not even sure what that means. Will you have that video posted soon explaining how to flash the device or program it (or whatever it needs to work)?

[@HackWithGullu]

Simple circuit diagram??

[@AbdusalomMamatkarimov-m1v]

Please send me diogram 🙏

[@kylegabrieldones9652]

I have done this but my nrf24l01+ doesnt work, it has a capacitor with 100uf 50v, but when I use mye nrf24l01 with built in antenna 10uf 50v capacitor it works. Can anyone help?

[@DivineZeal]

100uf is over kill, but also I suggest not using stock antenna for l01+. I used 9dBi

[@kylegabrieldones9652]

@@DivineZealwill try that soon, thank you so much!

[@mr_956_HK]

Post a link

[@DivineZeal]

Here it is my friend : github.com/dkyazzentwatwa/cypher-jammer

[@godhandoctober8992]

Can i use only 1 NRF24? or do they block separate channels?

[@godhandoctober8992]

Also, do you plan on adding OLED screen?

[@DivineZeal]

Yes you can use only one! I forgot to add a script that is only for one NRF to make it easier for ppl. I’ll do that later today. You can edit the code to do separate channels. I do have a version with oled screen coming - right now I’m testing to see if 1 esp can handle 3-4 nRFs, then I’m going to combine them so one will have like 12 antennas lol. Frankenstein

[@4seez]

@@DivineZeal pls make video too

[@pizzzdeath]

What about 33pin? How switch "one" or "two"? How send "high" on 33pin? And first CE you connect to digital 22, but why second CE on RX2(pin 16)?