Bluetooth RGB VU Meter with Multi Functioning Control

This is Bluetooth RGB VU Meter with brightness and sensitivity control. You can attach with your old home theater and it will be convert into Bluetooth audio home theater.
Bluetooth RGB VU Meter with Multi Functioning Control.
Diagram : drive.google.c...
Code: drive.google.c...
Share, Support, Subscribe!!!
Subscribe: goo.gl/WfYhoR
KZbin: / easytechzone
Twitter: / easytechzone
Facebook: / easytechzones
Instagram: / easytechzones
Google Plus: plus.google.co...
Cover songs collected from NCS youtube channel: / nocopyrightsounds
Song 1: • Video
Song 2: • Elektronomia - Limitle...
Song 3: • Electro-Light - Symbol...

[@mekateknik3717]

I absolutely regret not subscribing to this channel! I wish him a long evolution so that we can enjoy more and more videos. I learned a lot about this channel!

[@SDinnovation]

if the system is connected with Bluetooth how can we listen the music/songs , i.e. only vu will display but no volume/songs can be heard...

[@allardsylvain2773]

Hi. Where can I find the micro USB socket white ??

[@pamadessoft8568]

that 10k resistor must be there or not? in the video a resistor is used but in the diagram the resistor is not shown ... and one more question: is the number of 20 leds required or is only 15 enough? they sent me the wrong order and instead of 30led / 0.5m they sent me 30led / 1m ... 😟 I've already tried to build, but it doesn't work for me. thank you for answer. ... i try change in code numbers of leds from 20 to 15 but whitout any effect 😟

[@dileepkumarsharma3155]

Nice video bro

[@matefeind5154]

Hello. How much strips can i solder? Maybe to all "D" pins (D2-12)? Please help.

[@ashishdutta9215]

How can we learn connection with your RGB lighting videos you never tell about connection

[@GMarcopolo1]

Just stumbled on to your channel…..BRILLIANT !!!!! Would you accept orders please ?

[@easytechzones]

our website is roboman.in

[@RobNO]

Soooo you send directly the AC signal from the 3.5mm jack to the arduino pin. That thing does not like negative component...

[@Dancopymus]

Very cool! But I would like to do it without bluetooth, that is, connect directly to the speaker outputs; what would change in the code? thank you

[@easytechzones]

Need only 3.5mm socket

[@Dancopymus]

@@easytechzones Yes, but I must connect the 3.5mm socket directly to pins A4 and A5 of the Arduino Nano (without bluetooth) and it is not necessary to change anything in the code?

[@Dancopymus]

@@easytechzones Do you think that if it is made with LED strip of 144 LEDs per meter it is better or not? (Using 20 LEDs too)

[@amiya19277]

Excellent, Very good project.

[@arvindnaidu1109]

I don't know what is sunboard. Can you give me the link where can buy?

[@fafi5193]

Hello, what library are you using ... may I know which library you are using for the vu led rgb code ... thanks ...

[@djf71]

Im curious on this , what is the color code on the resistor ? Is the push pin a NC or NO ? What program is used too put code in ? Also im wanting too build a 4-sided wood tower with 4 led strips

[@alexanderalba3772]

congratulations...from Colombia

[@easytechzones]

Thankyou

[@FIXDIY]

Awesome diy electronics

[@easytechzones]

Thanks

[@bashahamjath4763]

Masha Allah super super

[@easytechzones]

Many many thanks

[@deepak7879madhavi]

Do the lights dance even if the volume is too low - means; does this work in the back ground with without volume or does it dance only depending on the volume?

[@albyghossan]

this is mono or stereo? Jack 3,5mm connect to output/input amplifier?

[@easytechzones]

Stereo. Yes. 3.5mm for output

[@teepees7275]

Awesome! Does it work if I shorten the LED strip?

[@mailliwagneravla1655]

Hello. Can I use RGB LED strip with 144 leds/m, or is this project specific to 20 LEDs each side?

[@anuprasad2380]

Ithinte oru contacting diagram ayachu tharoo componentsum

[@kartamat]

Hi, what the reference of your bluetooth ? HC05 or HC06 ... Or i can use what i want ?

[@putraragil7]

Kalo beli arduinonya yg udah di isi coding tinggal rakit aja ada gak boss

[@markevans8411]

5..55 in I wish you could show from where the wires come not just where they connect to. I so want to do this project thanks

[@taranagnew436]

can you change the name of the (any) bt receiver/transmitter?

[@splkbeats9155]

What card board you use?

[@gajendraprasadsahu703]

Super 😍😍

[@easytechzones]

Thank you so much 😀

[@DubDado]

is this with bloutooth vers 5, with atpx, no latency?

[@SarojKumar-rz8dh]

Do we need to download any laibary

[@ibrahimcelik7106]

Yaeh man !! I did it. It works perfectly

[@denilsonsilva1727]

Your project is very good, but when I copy the file on the Arduino it gives this error (Adafruit_NeoPixel.h: No such file or directory) how can I fix it.

[@edoha3646]

Nice video!! Is this gona work if i have a audio bluetooth module ? i mean the aux 3.5mm and the bluetooth is together on it and how i need to wire it up can you help a litle mate thanks !

[@luwefajardo3383]

hello where i can purchase the BLuetooth RGB VU Meter .

[@muhammedadil4463]

Amazing idea bro 😍 I like it 👍

[@easytechzones]

Thankyou

[@pritammaity3221]

​@@easytechzonesPlease add extra function: if music stop will show animation

[@shehzadg7787]

Nice

[@game_master_slovakia6736]

Amazing...awesome...Edit: this leds is connected with 3 metal wires: + - and signal?

[@easytechzones]

Yes

[@game_master_slovakia6736]

And 6:37 what is this red? -wire?

[@DesertCheetah]

3:50 whats the name music 🎶?

[@darkgift3127]

Usta eline sağlık

[@gabrielaraez4275]

Please EASY TECH, what is the maximum power that this vumeter supports? Thank very much.

[@gabrielaraez4275]

I want to connect it to an old HI-FI equipment and not by bluethoo. The equipment is 100 watts of power.

[@keukenrol]

0:20 Why not just cut in the middle of the copper pads?

[@nidarshanamurugan9796]

Very nice bro

[@easytechzones]

Thanks

[@nidarshanamurugan9796]

@@easytechzones I want same

[@nidarshanamurugan9796]

How can I get

[@davidgyorffy]

The number of LEDs can be increased? If yes, what should be changed in the code? What is the maximum number of LEDs what this Arduino Nano can drive?

[@lifeai1889]

It can drive hundreds if not thousands

[@ZORO1.O]

How much did it cost you making each and every thing

[@chillin2028]

Can i use the rca output instead of bluetooth?

[@easytechzones]

yes

[@armanarcaya2908]

what version of arduino nano you use.

[@IrshadBasha]

Can use audio jack

[@ranjitdey5525]

a LED lait kahapor milyga

[@easytechzones]

Online milega

[@williamrajesh256]

Hi, can I connect audio output directly to the analog input ie. Without bluetooth module?

[@Moose254]

yes

[@VirendraSinghVSingh]

Very nice 👌

[@donaldhenke2750]

i noticed that your schematic doesnt have the 10k resistor on it. does that mater??

[@easytechzones]

Sorry

[@easytechzones]

Suspected delete 10k and negative connectivity . I will update on diagram

[@donaldhenke2750]

@@easytechzones it works great with it!

[@honeyko7422]

Can you draw me a wiring diagram for this but instead of bluetooth I require a hack input. Thanks

[@ravikantpatel732]

Very nice

[@matt_mr.81_]

what is the code the link does not work?

[@duraiselvan3980]

Nice brother

[@CIRCA506]

I need your help I want make four sound bar with ws2812b for pc and lights for my desk

[@easytechzones]

you can use it

[@MGodoyAdventure]

muito bom, parabéns

[@tienngyen6482]

From where i can buy bluetooth module?

[@slipknotmetal5344]

how to add effect

[@SarojKumar-rz8dh]

Bhi it is showing that this app can open its code not another please tell how to do

[@faizantahirfaizantahir4824]

Ap kaha se ho

[@iantaylor6538]

why do you assemble the sides then drill the holes. better and easier to drill the holes neatly and in line then glue the side to the front. why not put the controls on the back as the look hideous on the side

[@gabbar7877]

from where did you get the code

[@easytechzones]

Check description

[@gabbar7877]

​@@easytechzones I know code is in the description . But i want to know how wrote it ?

[@hamzachalkha7981]

Nice nice

[@MrDegsy69]

Jesus the background music is so annoying in this video it makes me want to throttle its originator.

[@spaceblack5296]

Can we do this wish ESP8266

[@vindreshpremprajapati7765]

Nice video

[@Muraree100]

Where to buy this rbg led strip light????

[@toybitzz3498]

I think it would be better if it was black

[@bubbi451]

Hi there can you please list the parts needed for this project .Thank you

[@Davie7g]

Look in description. Drawing for project listed

[@techguna8793]

Bro the code is showing in my mobile in the Arduino droid app the code is showing error on the first line

[@techguna8793]

What is the problem bro

[@aniketsaini3279]

Is it real ? I think it is fake because all the LEDs are connected in parallel , then how you can control them individually ? If I'm wrong please tell me.

[@easytechzones]

Yes, you are wrong

[@easytechzones]

Because its ws2812b model led. Its work on single digital operation

[@easytechzones]

You can search ws2812 led on internet

[@aniketsaini3279]

@@easytechzones but LEDs are connected in parallel then how they can Glow individually ? Please tell me.

[@dtwistrewind7361]

Because each individual led has its own controller IC, notice the extra chip every led.

[@nareshkethula4952]

Thanks

[@easytechzones]

Welcome

[@bartekd3577]

Jak podłączyć bez modułu bluetooth tylko jack?

[@acelectronic2831]

good pro, i like it

[@easytechzones]

Thanks

[@mubashirt3954]

From where i can buy those sun board ?

[@easytechzones]

From glass shop.

[@sudalemuthu8114]

I have 8884570727....

[@surendranayaksurendranayak8969]

BAHAT AACHI HE MUJHE BANANAHE PATAS MILANEHI

[@adezkapten5293]

sorry bro the code is error I want to make the vu meter can you update the code again bro ?? please answer bro..thanks

[@FIXDIY]

Without Arduino please

[@techguna8793]

water_torture.h: No such file or directory when I compile the code this is comming bro what is the problem bro plz ineed the project bro plz help me plz plz 😭😭

[@sumankhatua3835]

Can any one help me to build aluminium profile led with a cheaper option?

[@syafrizalazhar32]

Saya berminat dgn proyek ini dimana saya dpt membelinya????

[@indradermawan8182]

nice!!

[@dj_sorra8605]

Stereo?

[@anoopbhagavathikunnel4350]

Can i upload this code using arduino android app on mobile?

[@TechnoSaquib]

Awesome

[@hugobareiro1912]

Hola donde lo puedo comprar

[@sujeetdhand7769]

Kya aap yeah banake sell karte hain

[@easytechzones]

No

[@mirceaudriste2178]

Hello. I like this project but I tried to upload the code in Arduino Nano, but when the program is compiled , I received an error: "Sketch too big" and Binary sketch size 32454 bytes ( of a 30720 byte maximum). I use a version of Arduino 1.06, and FastLed version 3.1.0. I need some advice from you. Why the program is too big? Have a nice day

[@easytechzones]

Start with fresh code

[@alfankosh1]

i hav same problem

[@subhashuphale1934]

Hi all this project part available in pune maharashtra

[@TamilArasan-rq3eq]

I need this., If it possible to sale

[@ahmadahmad1903]

قناتي المفضلة

[@anoopbhagavathikunnel4350]

Code is showing compilation error

[@indradermawan8182]

good!!

[@samirpatel2585]

GOOD

[@easytechzones]

Thanks

[@aniketsaini3279]

What's the operation voltage for this VU meter , I think it's 12v ?

[@easytechzones]

No. 5v

[@harishs2021]

How much cost brother

[@alejandromasciovecchio4243]

hola se puede hacer pero con arduino uno?

[@estelitagomes580]

Que buen trabajo .quiero uno así.jijij

[@rupindersinghbains9921]

Good

[@easytechzones]

Thankyou