Bluetooth Two Wheel Car Pet.(Control Via Smart Phone)-Version 01

For the Code Example , Please Visit following Link : javainstitutef... #Java Institute for Advanced Technology #java #Software Engineering #coding Ninja #pcjt #sqa #IICut #BCU

[@javainstituteforadvancedte1415]

javainstituteforadvancedtechnology.blogspot.com/2020/12/bluetooth-two-wheel-car-control-via.html

[@nirodharupasinghe2288]

☝☝☝☝☝code example

[@TS_CreationAqua]

Woow

[@rathnaironworas4791]

😎එල මචන්

[@hasithadilanka7865]

වාවු සර්.... 😍

[@zaid8779]

It's working? Or not

[@MClogc]

@@zaid8779 working bro

[@sltechgadgets9044]

niysmyi sir

[@cristinadascalu1514]

heeelp me it;s not working. what;s wrong? i put the code from video > not working, i put the video from comment still not working. what's wrong?

[@MClogc]

TX - > RX set karanna oni bluetooth module eke. Mata wune oya waradda💯

[@rathnaironworas4791]

❤❤

[@MaheshHeshan-wg8yt]

උදවූ ඕනි🥺

[@Autovehicles735]

This for use bluetooth hc 05

[@rasi1980]

mekata lights ehm hadanna barida

[@zaid8779]

Sir program code is not working please help 🙏

[@heardsth2484]

Yes sir

[@heardsth2484]

Code is not working

[@gamingsudda4285]

// Starting of Program int Input_Pin_4 = 9; int Input_Pin_3 = 10; int Input_Pin_2 = 11; int Input_Pin_1 = 12; char Value; void setup() { pinMode(Input_Pin_4, OUTPUT); // Digital pin 9 pinMode(Input_Pin_3, OUTPUT); // Digital pin 10 pinMode(Input_Pin_2, OUTPUT); // Digital pin 11 pinMode(Input_Pin_1, OUTPUT); // Digital pin 12 Serial.begin(9600); } void loop() { while (Serial.available() > 0) { Value = Serial.read(); Serial.println(Value); } if ( Value == 'F') { // Robo Pe_t Run Forward digitalWrite(Input_Pin_1, HIGH); digitalWrite(Input_Pin_2, LOW); digitalWrite(Input_Pin_3, HIGH); digitalWrite(Input_Pin_4, LOW); } else if (Value == 'B') { //Robo Pet Run Backward digitalWrite(Input_Pin_1, LOW); digitalWrite(Input_Pin_2, HIGH); digitalWrite(Input_Pin_3, LOW); digitalWrite(Input_Pin_4, HIGH); } else if (Value == 'L') { //Robo Pet Turn Left digitalWrite(Input_Pin_1, LOW); digitalWrite(Input_Pin_2, LOW); digitalWrite(Input_Pin_3, HIGH); digitalWrite(Input_Pin_4, LOW); } else if (Value == 'R') { //Robo Pet Turn Right digitalWrite(Input_Pin_1, HIGH); digitalWrite(Input_Pin_2, LOW); digitalWrite(Input_Pin_3, LOW); digitalWrite(Input_Pin_4, LOW); } else if (Value == 'S') { //Robo Pet Stop digitalWrite(Input_Pin_1, LOW); digitalWrite(Input_Pin_2, LOW); digitalWrite(Input_Pin_3, LOW); digitalWrite(Input_Pin_4, LOW); } }

[@alinanaeem2611]

@@gamingsudda4285 this code also not working

[@alinanaeem2611]

@@gamingsudda4285 is that code is correct i take it from another video / Starting of Program int m1a = 9; int m1b = 10; int m2a = 11; int m2b = 12; char val; void setup() { pinMode(m1a, OUTPUT); // Digital pin 10 set as output Pin pinMode(m1b, OUTPUT); // Digital pin 11 set as output Pin pinMode(m2a, OUTPUT); // Digital pin 12 set as output Pin pinMode(m2b, OUTPUT); // Digital pin 13 set as output Pin Serial.begin(9600); } void loop() { while (Serial.available() > 0) { val = Serial.read(); Serial.println(val); } if( val == 'F') // Forward { digitalWrite(m1a, HIGH); digitalWrite(m1b, LOW); digitalWrite(m2a, HIGH); digitalWrite(m2b, LOW); } else if(val == 'B') // Backward { digitalWrite(m1a, LOW); digitalWrite(m1b, HIGH); digitalWrite(m2a, LOW); digitalWrite(m2b, HIGH); } else if(val == 'L') //Left { digitalWrite(m1a, LOW); digitalWrite(m1b, LOW); digitalWrite(m2a, HIGH); digitalWrite(m2b, LOW); } else if(val == 'R') //Right { digitalWrite(m1a, HIGH); digitalWrite(m1b, LOW); digitalWrite(m2a, LOW); digitalWrite(m2b, LOW); } else if(val == 'S') //Stop { digitalWrite(m1a, LOW); digitalWrite(m1b, LOW); digitalWrite(m2a, LOW); digitalWrite(m2b, LOW); } else if(val == 'I') //Forward Right { digitalWrite(m1a, HIGH); digitalWrite(m1b, LOW); digitalWrite(m2a, LOW); digitalWrite(m2b, LOW); } else if(val == 'J') //Backward Right { digitalWrite(m1a, LOW); digitalWrite(m1b, HIGH); digitalWrite(m2a, LOW); digitalWrite(m2b, LOW); } else if(val == 'G') //Forward Left { digitalWrite(m1a, LOW); digitalWrite(m1b, LOW); digitalWrite(m2a, HIGH); digitalWrite(m2b, LOW); } else if(val == 'H') //Backward Left { digitalWrite(m1a, LOW); digitalWrite(m1b, LOW); digitalWrite(m2a, LOW); digitalWrite(m2b, HIGH); } }