LEGRABOX Assembly and Installation

[@creativemillwork6408]

Our cabinet shop will eventually convert to Legrabox. The big inconvenience is making the 38mm rabbet.

[@DemocratforTrump]

Not if you have a Cnc, my friend

[@kaceyplatt9526]

Many thanks been trying to work out how to remove a fitting !!

[@gurdeep1211]

Very Nice and well explained - Gurdeep Blum India🇮🇳

[@ricardo.medina]

Thank you for your video. I looked in official pages, manuals, etc. and the information was never accurate. Thanks again. Ricardo from Chile. Gracias por tu video. Busqué en páginas oficiales, manuales, etc. La información nunca fue precisa. Nuevamente gracias. Ricardo desde Chile

[@johannvanveelen248]

The video picture shows four expanding dowels for the front fixing brackets on the C drawer box. Why did I only get 3 dowel? incerts

[@bi0b0b]

It seems the F Height Legrabox uses M and C clips for the front, should the front clips be attaching to anything in the drawer side? Or should the M clips be just 'floating' around inside the side?

[@BlumInc]

Great question - C attaches to the mechanism inside the drawer profile, the M height bracket floats freely inside the top of the drawer profile to prevent flexing from side to side.

[@yelenakagan3543]

A homeowner here, purchased 4 F boxes for an entertainment center. Was surprised to find out that not a single screw is included with the hardware. Is that intended?

[@BlumInc]

Great question - yes, our screws are sold separately. We recommend #6 x 1/2", #2 Phillips screws for installation.

[@molley17]

can someone please tell me what the torx screw on the inside at the back of the boxes does?

[@BlumInc]

Hey there! That screw is the tilt adjustment screw. It adjusts the drawer front if it is shingling.

[@iordanstoev]

I have a question. In a video from your profile - 'Universal Individual Template', the holes for Tandembox rails are 40mm from the front of the cabinet (visible on the universal template). Here for Legrabox you state 37mm. Are both valid - Tandembox 40mm, Legrabox 37mm?

[@BlumInc]

Hey there - Both LEGRABOX and TANDEMBOX have a 37 mm setback from the front of the cabinet to the third screw hole.

[@iordanstoev]

@@BlumInc , thanks a lot!

[@aashishbansal5699]

Thank you for this Video. With this information only I was able to assemble LEGRABOX without any prior experience. Please make more videos like this. Also would request to simplify and unify the literature as in the current state its comparable to a PHD Literature.

[@BlumInc]

We're glad you liked the video, Aashish! Thanks for your feedback!

[@LiloUkulele]

info on Legrabox with Tip-on blumotion rails?

[@BlumInc]

Hi Michael! Here's a link to our website with more information about TIP-ON BLUMOTION for LEGRABOX: www.blum.com/us/en/products/motion-technologies/tip-on-blumotion/legrabox/programme/

[@Danny-gg6qk]

Do the runners sit back if it's an inner drawer or is it still the standard 37mm?

[@BlumInc]

Hi! If you are using LEGRABOX interiors then it will be the standard 37mm. However, if you aren't using LEGRABOX interiors and have made your own, you will have to set back whatever the thickness is of the front.

[@marinercegovic8049]

So if i want to use front which has thickness of 18mm and want it to sit flush with front of the cabinet i have to move it inside on 55mm mark? 18+37=55 correct?

[@KMR_PS]

​@@marinercegovic8049 Hello, I have the same question as you! How did you solve this problem?? Thank you

[@slavol1024]

What brand and color wood did you use for the box bottoms? I'm having trouble finding plywood to match the sides.

[@BlumInc]

Hi there! We used storm gray from Panolam for the box bottoms.

[@annarevzyuk652]

Is it stupid to pay so expensive for a drawer and use so cheap material for the bottom, It's a good example of how to do from quality Ikea trust.

[@BlumInc]

Hey there! Our LEGRABOX systems are tested fully assembled with 88-125 pounds of weight in the drawer, depending on which LEGRABOX product it is. A drawer carrying that amount of weight is fully opened and closed 100,000 times to ensure the product can withstand the weight and ensure the product will function flawlessly in homes - today and for years to come.

[@cnccustomwoodworks6596]

Why they talk mm if it’s 🇺🇸? Wtf!?

[@BlumInc]

Great question! Our products use the metric system because millimeters allow for better precision.

[@DanielTesla74]

Oh no! He should have used one foot and 3/16th of an inch and also express that length in Big Macs for easy reference. 'Murica!