Blynk App with GSM Module SIM900A, IOT Project

Hello guys,In this video we will going to learn How to connect blynk App with our GSM module,
and also we control a led using blynk app using GPRS
funtionlity of gsm module,Blynk app is free available on playstore.
Modify the code according to your need and used in your project.
Support me on paypal
paypal.me/tech...
Click here for blynk library(goo.gl/DttaVr)
For this project we need--
1.Arduino Uno
2.Gsm module Sim 900A
3.Bread Board
4.Jumper Wire
5.12v 2amp power adapter
6.A led (Use relay if you want control AC appliances)
7.Blynk APP.
Download Blynk app for Android or for Ios (goo.gl/nMoK4Z )
If you like my video please
Like,Comment and Share
SIM900A GSM Module and Arduino: Sending and Receiving SMS Using AT Commands.
• SIM900A GSM Module and...
Subscribe my channel for more updates & click on the bell icon for notification
/ technolabcreation
Checkout my others videos
GSM Based Home Security System using MQ-2 gas/Smoke sensor, Arduino uno and GSM module Sim 900A
• GSM Based Home Securit...
Cancel Save changes Control Home Appliances Using GSM module SIM 900A by sending an SMS.
• Control Home Appliance...
Rename and Change Passward of HC-05 Bluetooth Module||DIY
• Rename and Change Pass...
How to make a clap switch at home using Arduino||Control your light,fan just using clap
• How to make a clap swi...
Thanks for watching

[@apsingh18]

You are quick and clear. Awesome job.

[@vipulkumarsingh7958]

Untraditional topics u r selecting in each video...great keep going👍👍👍

[@technolabcreation]

Thank you sir 😃😃😃

[@robg5841]

very good project. The only criticism I would have is that you could have ditched the annoying techno music overlay. But the technical aspect is very helpful

[@technolabcreation]

Thank you for your feedback..from now I definitely consider to choose good music.

[@indiarobotschool9680]

Thanks

[@technolabcreation]

Welcome

[@electronic7979]

Excellent project

[@kolawahs96]

Nice video... 😀 Keep making such unique videos..

[@technolabcreation]

Thank you alok bhai 😇😇

[@axramar1992]

What if Device disconnects from GPRS? How are you handling it ? Did you implement Watchdog timer?

[@chalos9752]

Very good! Thanks!

[@technolabcreation]

Thank you 😁

[@astronomicaleye]

Badhiya hai yar...

[@technolabcreation]

Thank you bhai

[@luckymaurya4900]

Good one.... 👌👌👌👌👌👍👍

[@technolabcreation]

Thank you

[@yorlysflores6564]

Hi, I am trying to connect Blynk using SIM800L GSM module and Arduino Uno. When I connect it to my Arduino uno the module is connecting to the network but failing to connect GPRS. Connect GPRS failed.

[@nilanshusonkar8109]

Great project 👌

[@technolabcreation]

Thanks man

[@Parth_188]

What is the range ? Can we control within any part of world ?

[@technolabcreation]

Yes you can control anywhere from world

[@ShivamSingh-fj7mw]

👌👌👌👌nice sir

[@technolabcreation]

Thank you

[@mohammeda7093]

Hi Sir if we need to some more leds how we have to add actually we have define only heart pin 8 so.. Please help me

[@aadhikarianish]

Goes this GSM this module supports only 2G sim?

[@gowithgaurav9617]

Hello Can you tell how to use gsm module with raspberry pi with BLYNK app?

[@sayedhussaini4894]

3g ya 4g sim is module me use kar sakte hain kya.? Ya uske liye koi aur GSM module available hai.?

[@technolabcreation]

Sirf 2g sim use kr sakte hai isme . 4g k liye alag module aata hai

[@junaidhkv4153]

Can use sim900a 12V 1.5 A power supply Please reply me

[@saravanansaran4296]

Nice

[@technolabcreation]

Thank you

[@Mariogarcia-xl3zy]

I have a problem with your SKETCH (GSM SIM900) for arduino UNO, the modem can´t connect to GPRS, with other project can connect to GPRS for example with THINGSPEAK. why can´t connect? i´m tried with other baud rate, apn. Repeat in other project used at the same apn and works correctly

[@naderkheir6145]

i am facing the problem with apn its not connecting Dunno why

[@TheDragonghost333]

awesome,question: how can i make a led on blynk app to turn on once and dont close it until a sensor detect an object to turn it off and thanks in advance

[@codexrat]

Assign a Virtual pin to the Blynk led (e.g. V3), then on Arduino side execute this command: "Blynk.virtualWrite(V3,255);" to switch on the blynk led. Note: 255 is high state for led and put 0 to switch it off. Good luck!

[@embeddedenthusiast7121]

Mine saying cannot init

[@anirbanmandal3123]

Love it

[@technolabcreation]

Thank you

[@OSRWeekendTalks]

sir please tell what is video editing software you have used ?? please reply us and moreover nice videos

[@OSRWeekendTalks]

Reply please

[@technolabcreation]

I am using wonder share filmora

[@OSRWeekendTalks]

Software name??

[@technolabcreation]

It's a filmora

[@OSRWeekendTalks]

@@technolabcreation in that we don't have underlining feature i.e at this time 0:32 sir you used this feature

[@cryptoholic8009]

Register in network failed

[@ikankirik6085]

I use arduino mega, how to conect blynk ?

[@asep9356]

CAN i USE SIM800L?

[@patricksarmiento3721]

Hi! i did on the step by step tutorial on my sim900A MINI V3.8.2 and say it cannot init, What should i do?

[@adiesyukrie6807]

Yes same here...please help?.. I also use Gsm Sim 900A 3.8.2.. I also did step by step..but cannot init?...what should i do? Please help?

[@befit3252]

Can we add relay in place of led to turn on light or fan.

[@technolabcreation]

Yes you can add

[@timobonk6424]

It's really nice. i tried it but it stops. the message is SIM is missing. I use the SIMCom modul 808. Do you have an idea ?

[@technolabcreation]

Check your internet plan

[@timobonk6424]

alright, please help me what i need to do

[@technolabcreation]

Okk sure

[@timobonk6424]

what can i do ?

[@technolabcreation]

U must have data plan in your sim

[@mao5441]

Hi, I know I might be asking a silly question but is there any way like using Arduino Wifi with software to control the phone to call without using GSM module. Currently I am working on a project which using GSM to call but in the end, the product was too big and now still searching for a solution. Thanks!

[@technolabcreation]

No not any other way..

[@codexrat]

Yes there is Cheah! Check this link out allaboutee.com/2015/03/23/esp8266-and-arduino-phone-calls-with-twilio-api/ You ll need to modify it according to your needs! Hope this helps

[@pramodpansare362]

In Blynk app project goes offline after few minutes, that mean gsm module disconnected from internet and after reset arduino then will again online for few minutes.... Pl reply.....

[@technolabcreation]

Yes your gsm module will disconnect from internet... internet connectivity is poor .. Try to use sim in which you have better connectivity of network

[@codexrat]

Sometimes if you have low amp then this issue happens! Try to use 2amp power supply

[@ramakantshakya5478]

badiyaaaa

[@technolabcreation]

Thank you

[@e-teslaacademy1031]

Sir how we can send data over firebase using GSM module plz sir make video plz .... Sir

[@technolabcreation]

Okk

[@sayedhussaini4894]

I want to monitor soil moisture sensor values and temperature and humidity values using GSM with Blynk and Arduino... Is it possible can you please help me out.

[@technolabcreation]

Yes it is possible.. but response time is not very good

[@sayedhussaini4894]

@@technolabcreation it's ok. But I don't know how to do this. Can you please help me with code and schematic? Please

[@technolabcreation]

I can do for you..but it will take time

[@sayedhussaini4894]

@@technolabcreation I will wate for it sir thank you. Waiting for your response.

[@syafiqrazalee2597]

Serial monitor shows "SIM is missing". How to solve this issue?

[@technolabcreation]

check your sim is in working condition or not

[@syafiqrazalee2597]

@@technolabcreation Thanks but now my serial monitor shows "Modem cannot init". Any idea?

[@biswanathbanik]

12 V 2 amp power supply is required for gsm module?

[@technolabcreation]

Yes and it is must

[@aravindkumar3788]

👍👍👌👌👌

[@technolabcreation]

Thank you

[@shanmukhasivasai8335]

can we interface two gsm modules to act like a chat bots

[@codexrat]

Yup, in blynk you can bridge Two modules together! But you need to make that setting in the blynk app side.

[@PinheiroEngenharia]

My chip needs to has a internet plan?

[@technolabcreation]

Yes definitely

[@nitishnitish9172]

can we use 4g/LTE in this sim900 module sir???

[@technolabcreation]

No.... this module only support 2g sim

[@nitishnitish9172]

@@technolabcreation but I think sir you was used 4g sim in that module

[@technolabcreation]

Sim900a support only 2g sim services.. And except jio all other sim provides 2g services along with 3g and 4g. So.you can use any sim which has 2g services

[@nitishnitish9172]

@@technolabcreation thanks a lot sir

[@rittichaisrichuproung1494]

app blynk show project off line

[@mehriasolutions3071]

can we send GPS detail to Blynk App using SIM900A and Aurdinuo UNO??

[@technolabcreation]

Yes you can

[@mehriasolutions3071]

@@technolabcreation how?

[@mehriasolutions3071]

without involving the Wifi just using SIM900A

[@technolabcreation]

@@mehriasolutions3071 yes without involving wifi..

[@ammarmehr4]

​@@technolabcreation how can you suggest me any video tutorial or can give me code??

[@Ekstensiuniska]

conect gprs failed... please help sir

[@technolabcreation]

Check internet connectivity in your sim

[@anirbanmandal3123]

My GSM 900A v1.2 is not working . Please help me

[@technolabcreation]

What happened??? Please explain

[@anirbanmandal3123]

@@technolabcreation I tried to do the same thing with that but it didn't respond . The gsm is connecting to the network but not responding . I tried several codes but no . Please help me . Can give me your Gmail ? So I can give you brief details about it

[@technolabcreation]

[e-mail]

[@syafiqfarhan6298]

Can use sim 808?

[@technolabcreation]

Yes you can

[@pavankumar693]

Did u enter apn?

[@naderkheir6145]

in his case it is internet

[@sagarvaiyata9510]

Did u use airtel 4g simcard?

[@technolabcreation]

Yes.. having 2g services

[@sagarvaiyata9510]

If I use 4g sim then will it catch 2g services? I am really into an arduino project, can u please Whatsapp me [phone] I need your help, if u have paid classes i will surely do pay you

[@technolabcreation]

All sim services excluding jio provide 2g services ..so u can use it easily

[@albertusclaudiusdagomez3581]

I use arduino mega, how to conect blynk ?

[@technolabcreation]

Same as in Arduino uno

[@albertusclaudiusdagomez3581]

@@technolabcreation "connecting to blynk-cloud.com: 80" can you help me this problem?