Blynk2.0 - Log Events on the Timeline - EP.1 | JAKK DIY

Doing electronic & electrical projects
contact:
Facebook: / mr.jakk28
LINE ID: jakk.diy
Tel. [phone]
Today, I'm going to show you how to save the events of your interest as a Timeline in Blynk2.0 via Log Events.
to bring the data for further analysis
I believe that everyone who comes to watch this clip must have done some projects in Blynk2.0.
The project is to create a mobile application and write the Arduino code and upload it to the board.
Then bring the board to install to use and then have to open the app in order to operate or monitor various settings.
which our board can read at the moment
and when we close the app We will not see anything about our board at all.
What happened while the board was working in 24 hours?
I personally When designing systems, I like to have the equipment I design.
Interact with me all the time, not installed. The board did its job.
We want to know, then open the app to see for yourself like this.
Therefore, it will be noticed that in my design I always include a notification function.
For example, a notification via LINE of the plant watering device.
For Blynk2.0, it also has a feature for notifications on the Blynk app as well.
Called Notification, which is a notification that lets us know immediately.
what happened to our board If a problem is needed will be able to solve it in a timely manner
But for the feature that I'm going to talk about today, it's not Notification or notifications.
but will be Log Events or record events that can be retrieved as Timeline
What happened, on what day, and at what time can we continue to analyze this information?
#Blynk #LogEvents #Notifications

[@toondekbaa]

เข้าใจง่ายเลยครับ

[@vi6107]

ขอบคุณมาก ประโยชน์ดีมากครับ

[@kingarttychannel6805]

ของผมทีแรกมันแจ้งเตือนนะครับ พออัพใหม่ ไม่แจ้งเตือนอะไรเลย อัพโค้ตใหม่ก็เงียบ แต่บลิ๊งทำงานปกติ nofication ไม่ทำงาน เกิดจากอะไรครับ ผมลบแล้วแอดใหม่ ก็อบชื่อ มาใส่ในlog even ก็ไม่ได้เหมือนเดิม พอรู้สาเหตุไหมครับ 🙏🏻🙏🏻🙏🏻

[@s.porsalam9658]

มีตัวอย่างโค้ดไหมครับ

[@jakkdiy]

โค้ดทั่วไปเลยครับ​ อยากให้ log event ตอนไหนก็เอาโค้ด​ Blynk.logEvent ไปวางได้เลยครับ

[@user-kw3yx3vz9v]

@@jakkdiy ต้องเสียตังก่อนเหรอครับ ถึงจะเก็บ log ได้