Visit our website www.bmacvags.com Join our Facebook bmacvags CLICK THE LINK TO BUY THE INTRO SONG : shop.bmacvags.c...
Пікірлер: 76
@amplifypluto36223 жыл бұрын
So happy to see someone that finally explains it quick, easy, gets the job done with no messing!
@BMACVAGS3 жыл бұрын
Glad it helped
@wezdarsit3 жыл бұрын
Thank you for posting this just changed my bumper after it was damaged great job all done plain and simple instructions 👍
@cyrex6866 жыл бұрын
Thanks man, you have the best vids for this car.
@adrianrainbow41066 жыл бұрын
As usual dude, plain and simple, thank you.
@biggedybiggedybong80323 жыл бұрын
Thankyou for posting..been dreadin removing the bumper but u made it look easy...👍
@BMACVAGS3 жыл бұрын
Gpood Luck
@k20importtuner8 жыл бұрын
Thanks for the vids Bmac. I think it was your vid that helped me get my hatch open from the inside when the mechanism got disconnected. & btw, triple square is a name for a 12 point bit.
@tomrees91866 ай бұрын
Great channel so easy to follow short vids etc perfect!
@mikebel744 жыл бұрын
Just what I wanted to see. Very clear and well presented. Thanks!
@eamonnquinn95858 жыл бұрын
Thanks for the clear instructions & tips.
@johnnoonan58023 жыл бұрын
yes very good and professional ,you have a great pair of hands , is that car going for scrap as theres lots of stuff in the boot , just woundering thats all ,i wouldnt mind having it as its a nice color golf
@BMACVAGS3 жыл бұрын
That car is long gone
@jesoby9 жыл бұрын
Somewhere behind the bumper is a vent that can let water in to the boot if seal perishes.
@rayofdeath660410 жыл бұрын
awesome vid as always! thanks man!
@mediajunkie938 жыл бұрын
Remove Rear Brake Lights 3 Bolts behind Carpet Unclip Globe Module from Cluster Losen and take off Two Back Wheels Lift Car, Put Stands underneath Take two back wheels off Push Rear Deep Gromits inwards and then pull them out with pliers 13mm Torx Scre from Top 2 more from below remove 3 20/25 torx inside wheel arch Remove Bumper UnClip License Plate Globes
@ss1271 Жыл бұрын
Thank you sir. This looked like a mk4 golf's rear bumper, wasn't it?
@-_-Girthbrooks-_- Жыл бұрын
Yes. It’s a Mk4 golf.
@adrianmcdonald56848 жыл бұрын
good vids bud,wondering if you can help,looking for a door same colour as this one in video 3 dr ?
@fockyoumang10 жыл бұрын
Thanks for the videos. I need to replace my bumpers after lowering my car and the New England winters freeze your bumpers and they crack when you try to pull out of your spot you just dug out and hit a giant frozen snow bolder or gets pact in by the plows and rips the grommets right out. I'll wait till the end of winter but I wouldn't have had the confidence to do it myself if not for your videos. Now I need to learn how to replace my fender. The hub broke and the control arm and knuckle fell inside the tire and crushed the fender upwards on its way down. The wheel was turned to the left so it ripped it out from the firewall side and at the rocker panels. It looks like it's going to need some welding or a new rocker panel. Idk
@belianpovlacs9009 Жыл бұрын
It’s not clear for me that the black clips that were under the lights are reusable?
@stanislavzhelev84772 жыл бұрын
Thank you
@petergolfmk43993 жыл бұрын
Very interesting thanks
@BMACVAGS3 жыл бұрын
you are welcome
@RadostinVelchev8 жыл бұрын
Great video, I'll need to go trough this procedure because the cable for the number plate lights has fallen inside the bumper
@k20importtuner8 жыл бұрын
Mine, too. Last time I ever try to drive around without plugging them in.
@RadostinVelchev8 жыл бұрын
I've changed mine for LED ones because the original light cases were burned by the bulbs.
@k20importtuner8 жыл бұрын
+Radostin Velchev the oem led fixtures? Im installing those now/today. I reversed the polarity on 1 then when I was waiting for 2 new pins from vw the wires fell in. Did you need resistors? I dont want to use resistors but dont have vagcom.
@RadostinVelchev8 жыл бұрын
Got some aftermarket ones with 18 SMD LEDs each from ebay. Mine MK4 is 1998 and does not have bulb monitoring.
@k20importtuner8 жыл бұрын
+Radostin Velchev Got my leds working! I have the oem ones. 1k8943021c. Im in a mk4 as well; 2003. Just had to unpin the connectors and reverse the polarities. :)
@Spr20072 жыл бұрын
Do I need to disconnect battery for light removal?
@MrRandolphLSmith8 жыл бұрын
Great video, thanks for posting it.
@largol33t18 жыл бұрын
Do you have a video on how to do the 2015/16 VW? I can't find it anywhere.
@suable3 жыл бұрын
Thanks for this
@مدربفنونقتاليةمختلطة5 жыл бұрын
شكراً جزيلاً لك على هذه المعلومات القيمة
@criminal101018 жыл бұрын
nice video my car got rear ended bora 2000 now boot closes but won't lock help please
@uberpies2 жыл бұрын
Are the rivets reusable
@postal260010 жыл бұрын
There is no link on how to remove the tail light :(
@vidarg7510 жыл бұрын
I've searched through earlier videos, but can't find that video.
@postal260010 жыл бұрын
Me too ...
@MrRfaass8 жыл бұрын
+postal2600 Just take a look, 3 10mm nuts... very straight forward :-)
@European_carclub5 жыл бұрын
@@MrRfaass some are 8 mm if they aren't 10
@vntprohits31997 жыл бұрын
Heyy BMac, I'm having trouble with my mk4 golf recently displaying an alert: " Emission workshop " whenever I first start my car. it just appears once and a single beep and then disappear. but car runs fine and no problem but only that alert thing. I don't know why it doesn't that. please Help Help Help waiting for your response thanks
@oisinmooney9 жыл бұрын
Where are the grommets you pushed down earlier, and how to replace them??
@maui62077 жыл бұрын
Thank you. Big help.
@samuelmicallef94689 жыл бұрын
Thanks for the help.
@kimilesnipez4 жыл бұрын
Anyone know if the plastic bottom half will unclip from the main bumper. Mine has melted bad and was going to fix before I sold the car.
@roiman22310 жыл бұрын
Very Good !! Thanks
@Alae-b48 жыл бұрын
Roberto Fernandez
@MAXXOZIC9 жыл бұрын
thanks for info !
@slipperyhand6 жыл бұрын
Just made new Record of removing bumper, 3min n 5 sec
@Wrofeel10 жыл бұрын
Very nice video! :))
@dorofteiionut718 жыл бұрын
hello! I want to see how to remove a Seat Leon 1M front bumper!
@brendanchennells464910 жыл бұрын
I have a 2000 golf 2.0. If I'm sitting in idle for a period of or in traffic my car starts to over heat. Well the gauge says it's over heating but I haven't actually overheated yet also my oil was not sludgy. Help me. Or please give me your email I have more questions please.
@MrRfaass8 жыл бұрын
+Brendan Chennells might be you fan, or fan switch. If your gauge says 190 steady during driving your thermostat is ok...
@brendanchennells46498 жыл бұрын
Robert Faass ending up being a bad fan.
@CORRIGEEN7110 жыл бұрын
Vw golf mk 5 phone button on steering I think its Bluetooth how do ya get it to work
@alfbittner64898 жыл бұрын
Is this mk3 or mk4? cheers.
@DowellPa8 жыл бұрын
mk4
@alfbittner64898 жыл бұрын
Where's the bolts on a mk3 cheers.
@winstonbanks10575 жыл бұрын
If you ever get chance gear box oil change be nice
@75erind9 жыл бұрын
very nice
@ImDuane9 жыл бұрын
The screws at 1:56 just keep spinning for me and i cant get them out? Any suggestions?
@goonzjav9 жыл бұрын
Pull them out with pliers
@Aary0hn8 жыл бұрын
Any tips on how you did it? I'm having the same issue... pliers didn't shit unfortunately
@peteriskrumings87712 жыл бұрын
Oh the other side there is tiny nut thing that is pressed to the plastics surroundings, if you apply too much force, it will get loose and start spinning. So as precaution apply rust penetrator oil and let it do it's work. Don't get fooled if the screw looses easy at the begining. It's the rusted other end of the screw when it gets in the nut it may stuck there. If you already broken it (like I did hehe), you will have no option but to work with pliers and moderate upword force. It is only plastic surroundings so you will get this out eventually and not real damage will be done. You can fix that by adding bigger nut and glue that in place or just fill the hole with some epoxy putty for plastics, it is not so much big of a deal anyway because the bumper is hard fixed in place already with the second screw (not to mention all the other screws) and is not going anywhere.
@LuisVelasquez-mb5ww10 жыл бұрын
That the rims i always want for my mk4 :(
@spleno13 жыл бұрын
@ 0:54 is the DREADED braking the corner pecker! Rookie!
@BMACVAGS3 жыл бұрын
It happens
@ivann97x10 жыл бұрын
+Luis Velásquez They are from the previous Audi A8 ;)