BMW 005088 EGS Electronic Transmission Control Sensor Transmission Selector Switch FIXED!!

BMW 005088 EGS Electronic Transmission Control Sensor Transmission Selector Switch FIXED!!

[@oghpsgbgn7309]

Thank you so much i will tries mine if i gets lucky. Thanks

[@sadiagnostics]

No problem you’re welcome

[@drifter292]

I have the same problem on e39. Don’t know how to fix

[@eliesercasanas7543]

Hello, I have a 2004 BMW 545i with that same code 005088 but I don't know if it has that connector system as you show

[@sadiagnostics]

Hi am unsure it’s best to trace the gear leaver and following it that way

[@romalio_mrn]

Hi, I have a problem with a BMW e60 3.0d 6hp26 gearbox, the car shifts perfectly except that when for example I get to the traffic light despite having my foot on the brake the car starts to force itself as if to move forward and to vibrate, I put it in N then in D and it starts again same thing also by putting my foot on the brake in R but it starts to force and vibrate, I washed and serviced the gearbox hoping it will be resolved but nothing, I repeat, the car shifts perfectly and it didn't give me any warning lights relating to it, putting on the diagnosis it gave me such as error 005088 and P0705

[@sadiagnostics]

I’d recalibrate the gears and code them in one by one and see if that makes a difference other wise am unsure.

[@holliel8582]

I have the same fault code, but my car drives and starts perfectly, accept my car doesent want to change gears when I move off from a red light, but then runs fine when it gets into gear, what could it be ?

[@sadiagnostics]

Your best plugging it into a diagnostic machine to see what fault code comes up. It could be clutch etc…

[@princemartins5606]

My bmw 320i gear box light is on and it give some Jack bfr it changes

[@UefaKupali]

Can have many causes, you have to read out errors first and describe the error in more detail here

[@otoilot9772]

Hey i have same problem, but diagnostic dont show me fault code and i cant start car

[@sadiagnostics]

Yeh it won’t show codes sometimes and one of the symptoms is it doesn’t start and if it does it will be shaky engine

[@maximrabah2169]

Please someone help with a suggestion . I have the code P0705 A Circuit Gear sign and battery light on . The car can start in all Positions P,R,D,N .and when it starts it doesnt show which gear the car on the dashboard. instead I get transmision sign with the exclamation mark in Orange and this is when I can drive the car almost normally and the car can go reverse and from second gear and up but with no first gear and parking sensors are not beeping nor reverse lights working .but if I dont see the transmision fault sign, the car go only in first gear up 20km ph and doest change to second gear and up and no reverse . I changed the transmission range sensor and bought a new battery and tested alternator with a specialist and said its fine which leaves me frustrated . The car is BMW e46 325i / 2001

[@mahinasmilemrb3586]

👍👍👍👍🇵🇭❤️📌👍✌️

[@UefaKupali]

If you think that this solves the problem 5088, then you are very wrong

[@sadiagnostics]

No I never said it will solve this problem this is 1 of many problems for that gearbox. I’ve mentioned it in the video how other things can cause this problem, but in this case the loose cable caused this. Please watch the video fully before commenting…

[@UefaKupali]

@@sadiagnostics Danke für den Hinweis...

[@sadiagnostics]

@@UefaKupali you’re welcome