BMW CODING EP. 1 - PATHWAY LIGHTS (e60 e63 5 6 series)

[@Mr_Dona_]

2:02 you say you using coding profile but in mine just defoult profile smting mising?

[@Se6mic]

Will this work with Lm1, bixenon without dynamic and radio mask?

[@A86-t3y]

My cousing bmw e60 2004 535d has a problem with the angel eyes they turn on for 5 seconds after that they stop working any ideas on why this is happening

[@shlooky]

Thanks Rosnik for all your videos!! Quick question... whewre can I download NCS Expert and INPA? Also would like to know in your next coding video how to add the digital velocity, thanks again!!

[@Pb0815]

Is there an possibility to change what button activates the welcoming light? So that you could activate the lights with unlocking the car?

[@leoortega6370]

Hey quick question, I just installed a led ambient lighting kit on my bmw and I’m wondering if it’s possible to adjust the bmw computer to be able to run the specific relay that powers them. Currently the lights from the kit only turn on when the engine is running and even then it only powers the leds on the dash and not the ones on the door, the lights installed on the doors only power on when the car is running and a door is open. I would really appreciate the help thanks.

[@infernalelevator6044]

Isnt that what you did just activating the welcome light ?

[@javiertorres9666]

cool i will try it hope i can code my car right i have a question the pathway lighting only lights up my door side mirrors they will still working along with the head lights hope see more videos like this really cool thanks bro

[@sujeet6635]

hey man, i been trying to code 2009 e60, can't see the pathway option on my idrive, its a european version

[@familymendes148]

It will be called welcome home lights

[@abberadhi]

I followed your steps. Initially it did not work for me. After searching, turns out I had to do one more change: CAS: parameter SONDERTASTE_PANIKALARM change "nicht_aktiv" to "panikalarm". Then it worked. Opening the trunk did not work the same after that. Before it was just a long press on the key to open the trunk. Now it is single press, then press again and hold. Hopefully it helps someone. E60 525i 2005.

[@turkmentv5575]

THANKS IT WORKED

[@abberadhi]

@@turkmentv5575 well done 👍

[@kilkutis2]

Hello mate, it's working for me but only for couple of seconds, I change time in idrive but anyway path lights working from knob only for couple seconds

[@dcafanatics1244]

Hello, In case I have an e60 nfl with adaptive headlights and aftermarket LCI lights (plug&play) and I want to change the LM1 module to make a retrofit to the LM2, in order to be able to activate the welcome lights and the intensity of the angel eyes and the dayline. May you please explain in a video or explain me how this retrofit can be done, I heard something that there is also an ALH module from the headlight and the wires need to be connected to the LM2 and then coded with NCS Expert. I will really appreciate if you can explain me or make a video how to make this retrofit.

[@njegoszivanovic9458]

Do you know how to turn off flashing high beam on e60,I put led h7?

[@majdmejo]

Hey man thanks a lot nice video but i try and try try hihi doesn’t work .. wha i should doing to work it ( 2006 e60 ccc ) i tried NCS show me the code ended but doesn’t work with the key .. can u help me please?

[@armandohilario]

Can I use ncs dummy or not

[@mirzoni5331]

Is this working on e90?

[@anas-un4gg]

Hey, i have coding ist and its active Anas the light is on Auto. But its Dont light Edit: or is it because of the lamps.

[@AS67851]

When it ended coding my lights started flickering and they don’t turn on anymore they are always flickering please help

[@Digou13]

My car sometimes working , but must of the time not , my battery isn’t really good , maybe this is the reason ?

[@mohamedaos6330]

hey bro for the first time i see ncs in english does it support english ?! and where to download from please ?

[@1pizzadox632]

Hello i tried this on my 2004 bmw e60 but doesn't work because my car only have MASK i don't have navigation CAPPL

[@theonlyjkyang]

Nice video. Id like to know how you got the newer key to work. I have a 2008 e60 and have been looking for a way to get the newer key.

[@roskinc]

this specific F series style key wont work on your 2008, BUT their is a way to upgrade it to look like a newer f series after the one i have, the one with the pointier end, will order the key and make a video on it. thanks for the suggestion!

[@theonlyjkyang]

roskinc awesome and you are welcome. Can't wait to see that video :)

[@paulsmith198786]

Hey man I have e60 550i with the cic retrofit however no Bluetooth audio or usb/aux port. Any ideas on what to do to get those? Also the bmw connect online too?

[@roskinc]

you need to add combox retrofit to the cic, that was only available on e90s so youll have no trick the car into thinking its a e90 so the combox will work.

[@forumjomkitatanya.8683]

Hi how did u code the CIC display unit to the one u showed? Mine is the E60 old display.

[@roskinc]

its not coding, its a whole new unit, new screen, controller.

[@javiertorres9666]

hello i took the legal disclaimer off with your help i want to add the bmw logo on my screen if you can help where is it or whats the steps to do it it will be some of the next things ill code thanks i might send you the CAS for programing a new key F series on my 05 525i e60 hope you can help me with the steps first or anyone in here im using ncs expert and inpa thanks...

[@omegasak1752]

Respect to you Sir... Thanks for this!!

[@jeffgombosi6865]

I installed your sport mode button and the light keeps going out. No biggie, but I installed an Technic amp wiring kit, and it worked fine. But now I get the SOS error, and no noise, when I unplug it and use the BT module, also from your company, the left side audio is gone. Any tips? Keep up the awesome work man

[@roskinc]

Jeff Gombosi the sport mode check the ground. That’s the likely cause of the light. The technic amp the sos error is wrong the green fiber optic wire transfer it to the main plug. And the left side check that the plugs are in the right slot. Red 7, black 8, white 2 should be in this spin slots if only 1 side sounds like the 7,2 might not be seated all the way in.

[@Theriion]

Hey. I haven't start my NCS expert "adventure" and before I do... How can I tell what functions can actually be coded on my car?

[@roskinc]

Search your model on google followed by “coding cheat sheet” usually someone post all the features you can code

[@njegoszivanovic9458]

Hello man, I set, Now work , I have question can put to light come on when unlock?

[@robertt.1218]

Yeah, that would be nice. Did you find out how you can do that?

[@MrABC1231981]

Do this coding pathway light work on mask, no navi?

[@roskinc]

Hau Tran yes it does

[@jetForceSkuter]

Hello dont work at me ? :(

[@matuskunik2068]

Hi, will this work with e60 2005 pre-lci with halogen lights?! Or it need a LM2?

[@roskinc]

both lm2 and lm1

[@matuskunik2068]

@@roskinc i don't know why, but for me isn't working... Double click on trunk butto does nothing..

[@matuskunik2068]

Now it's working for me, i coded with Carly for Android, but i don't know why always when i press the button, the lights come up, but the trunk is open as well.. 😂 Do i need to press the button once short, or hold it longer 2-3s..? I don't want to everytime close the trunk.. 😂

[@sjiefb3393]

Matus Kunik how did you code it with carly? Going via lma or anything else? I can’t find the right setting.

[@lcmperformance9409]

how do i get that sat nav view ?

[@The6Serie]

Its work with the default profile in ncs expert or i should get another profile?

[@roskinc]

Joel A. Brown B. It has to be a profile that’s settings are made to upload the .man files. I don’t believe the default profile does, email me [e-mail] I will email you the profile I use

[@The6Serie]

Hi, I found the revtor's profile and works fine! Thank you!

[@mwsellox7751]

Great video 💪

[@luisipod1]

awesome page, thanks for all the info. id like to rent one of your rental kits soon!!

[@kevina907]

Please do a coding video to install your aux cable because your old video isn’t compatible with the new ncs

[@roskinc]

it should be the same, but now that i can screen record, ill definitely record my next aux coding and upload, thanks for the comment!

[@joshmo495]

I had no problem coding aux with the new ncs. There were 2 errors that came up while coding but a quick google search fixed it

[@llllPROTOCOLllll]

I had no issues coding it.

[@cacharolo85]

Can you please share a link to download all these tools for Windows 10

[@leonardmiller2336]

Ok where do i get the soft wear please and the interface cable?

[@roskinc]

Leonard Miller cable eBay or amazon, the software usually comes with cable is not search on good “mikes easy ncsexpert install”

[@SaaLSeeRo0]

Donde puedo descargar el perfil coding?

[@mgrandxn]

I did this and now i have fog light error popping up

[@babydriver7396]

For this Code need Lm2 to work?

[@roskinc]

No, works with lm1

[@babydriver7396]

@@roskinc when can i buy?😅

[@unauthorisedgangsta]

Will this work on pre lci 6 series?

[@roskinc]

Abid Rahman yes it would, done it many times for 6 series owners.

[@remusbalut5601]

I did exactly as in the video but it does not work. It keep on daytime running lights when I lock the car. And I dont know how to disable that :(

[@roskinc]

Remus Balut are you sure you edited the correct string? I’ve done to to tons of cars and never had an issue,

[@remusbalut5601]

I will try again . Can I write you on Instagram?

[@roskinc]

Remus Balut contact me any way Instagram or email [e-mail]

[@315Boss]

Does this work for 2009 BMW 535i xdrive?

[@roskinc]

Yes

[@315Boss]

@@roskinc whats the price?

[@315Boss]

Do u do remote coding?

[@315Boss]

The site for coding cable says 1998 -2008

[@The6Serie]

Any of you has battery drain issue after done this code?

[@roskinc]

Joel A. Brown B. This shouldn’t cause battery drain, this is a standard feature in all bmws except USA cars.

[@alperen194]

i love how you say "nicht" xd

[@Roomer645]

Did it .... No pathway light using the remote ... Do have the second duration in the CCC menu and all but the Remote trunk button (brief press) doesn't do anything for any lights. Remote pops open (long press) fine. My AUX coding recently worked fine, just as the permanent speed reading int he cluster went fine. Don't get it why the the Pathway lights won't work.

[@roskinc]

If you re-read the module is the string still reading as nitch_aktiv?

[@Roomer645]

Yes sir .... That's why it's so weird. There are other Heimlicht values, so i will check out those tomorrow.

[@Roomer645]

I worked it out, thanks to Pawel SWI. I think there is a difference to the EU models and the US spec E60's. certain things are 'set' different by default at the factory. For me this made it work: ----------------------------------------------------- In LMA module you need change HEIMLEUCHTEN_FUNKSCHL nicht_aktiv - aktiv HEIMLEUCHTEN_VERLAENG -switch off when press second time remote control nicht_aktiv - aktiv HEIMLEUCHTEN_ABBRUCH nicht_aktiv - aktiv Module: CAS SONDERTASTE_PANIKALARM nicht_aktiv change to panikalarm ------------------------------------------------------ Short press the Pathway Lights, longer press and release is the remote Trunk.

[@The6Serie]

Hi mate, what you did? i got the EU model and didnt works.

[@Roomer645]

Hey man ... I did as the instructions above mentioned. So don't forget that you have 2 seperate module coding sessions: - LMA (light module) with 3 changes HEIMLEUCHTEN_FUNKSCHL nicht_aktiv - aktiv HEIMLEUCHTEN_VERLAENG -switch off when press second time remote control nicht_aktiv - aktiv HEIMLEUCHTEN_ABBRUCH nicht_aktiv - aktiv - CAS module (Car access Module) SONDERTASTE_PANIKALARM change nicht_aktiv to panikalarm This worked for me, a 2004 E60 525i

[@harcorowykoxu]

Not working 🙈

[@jgdran]

Any coding on F10?

[@roskinc]

jgdran will start on f10 as well soon.

[@BblopP]

Unfortunatelly this does not work for my e60. I can get pathway lights only when i leave switch in AUTO mode and turn on the High beam, then it works for the time set, but not using the button on the fob

[@EdwinBenzov]

Now work.. 2005

[@dannyruiz8654]

How did you add the LCI tail lights?

[@roskinc]

I have another video on the tail lights. I also have same OEM lci tail lights for sale

[@dannyruiz8654]

roskinc I have the LCI lights but I’m trying to see the steps to install the retrofit? It’s not a plug and play

[@thedroneshow1214]

Need some 19" spiders on that motor will look sweet as a nut mate

[@saidtiganoff5888]

Didn't work on e61🙄

[@roskinc]

It should. Double check the coding, done many e61

[@saidtiganoff5888]

@@roskinc I just done it twice, step by step as you are showing. Maybe because the idrive is old style, not upgraded

[@roskinc]

@@saidtiganoff5888 idrive wouldn’t matter, car in video is 2004 so first year production. Plus lights controlled by lm module, so the idrive version wouldn’t matter

[@saidtiganoff5888]

@@roskinc thank you

[@saidtiganoff5888]

Would you be able to email me your "Coding profile" ?

[@SaaLSeeRo0]

No funciona ya probé y no funciona

[@Rc-a322]

More coding broo

[@Dave_dave69]

SE lol