BMW Door Handle Gasket Rubber Seal Removal and Replacement E31 E32 E34 E36 Z3

[@BIMMERZEITT]

Hey guys. This is a re-upload of the video I posted a few days ago. It wouldn't process in 4K resolution. Well, now it's available in 4K. Enjoy! Get NEW Door Handle Gaskets: ebay.us/CyiRfC Pick Tool For Gasket Installation: amzn.to/2Iuy9Il Rare BMW Parts: ebay.to/2kd26AR BMW Goodies: amzn.to/2HRK03i BMW Tools: amzn.to/2Jy1VMN In this video I show you how to remove and install or replace the rubber door handle gaskets in your E31, E32, E34 or E36 BMW. Get a new set of gaskets here: ebay.us/CyiRfC #E32 #E34 #E36 BMW Ceramic Coat: amzn.to/2Jzlpk7 CERAMIC WASH: amzn.to/2TP9SyX BMW GOODIES: amzn.to/3mLRZ0s Griot's Synthetic Clay: amzn.to/3oTcYQL Dual Action Polisher: amzn.to/327oyho Hexlogic Foam Pad: amzn.to/3mMA8GH Meguiar's 205 Polish: amzn.to/387C88n BMW OIL FILTER TOOL: amzn.to/2TRFYdy BMW GERMAN OIL FILTER: amzn.to/389ufPU CREATOR C310 BMW SCAN TOOL: amzn.to/2TMhJgO GREEN MOLYGEN OIL: amzn.to/32aoTQn LiQUi MOLY ENGINE FLUSH: amzn.to/3mLSIPe LIQUI MOLY LIFTER ADDITIVE: amzn.to/35YpZzP LiQUi MOLY JECTRON INJECTION CLEANER: amzn.to/3oRzlGg BMW Maintenance: amzn.to/383YLup ONLINE www.bimmerzeit.com THE GRAM instagram.com/bimmerzeit FACEBOOK facebook.com/bimmerzeit TWITTER twitter.com/bimmerzeit Questions? Send me an email at [e-mail] My CAMERA GEAR; Sony A7sii: amzn.to/32aevZ1 Sony 16-35: amzn.to/35Xl6as Rode Mic: amzn.to/3oTdIFx GoPro 8 Black: amzn.to/2JzmrfZ This description contains affiliate links. If you click my custom link to purchase a product, I will earn a small commission at no extra cost to you. Win! Disclaimer: Due to factors beyond the control of BIMMERZEIT, we cannot guarantee against improper use or unauthorized modifications of this information. BIMMERZEIT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BIMMERZEIT recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BIMMERZEIT no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BIMMERZEIT. Video and Content is owned by BIMMERZEIT © 2020

[@marioesquivel7965]

Fantastic video, replaced the gaskets today. Note: I found that removing the inner oval cover first, then the outer oval ring cover prevented scratching paint. To sum it up the video tutorial is spot on and was very helpful

[@macelius]

One of the best videos on this. Clearly presented, including all details. You can also heat and bend the end of an old screw driver, or even use some clothes hanger rod.

[@jetpak12]

I replaced these on my E34 earlier today. I replaced the handle surrounds also, since mine were pretty rough. The surrounds on mine and the replacements were metal, not plastic. Anyway, I was having a hard time until I made sure that the rubber seal was laying flat and not pinched between the door and the trim. Thanks for the video!

[@andreweisenhart6309]

Was struggling to install mine new gaskets on my E36. This should help me try again . Thank you!

[@dillanmistry]

Wow that’s more simple than I thought

[@jlkoelker]

If you dont have that hook tool, you can use an allen key clamped in a vice grip.

[@SoniaInternational]

Or a paint can opener!

[@Resq28]

You rock!! Thx for posting this, I just bought a set for my 1990 735i

[@mr.luciofficial]

Thank you so mutch i worked on these way too long

[@fahadha]

hey, have coming here via your BAT posts. love these cars, I hope I find a decent one one day too!

[@BIMMERZEITT]

Thanks Fahad. Keep your eye out on Facebook Marketplace, that's where all the deals are found!

[@fryreartechnology7611]

My lock just popped and seen this video pop up and was like I need to that to my Z3 M roadster and now I’m like we I think I need to get them while I’m in there. Have to wait on a day off to work on it. My key buttons are worn out from years of use and pocketing. But the manual side of it work until last night

[@andrewireland7681]

Really good tutorial. Thanks !

[@EnriqueLopez-hb5jn]

Really good tutorial, how long do those gaskets last

[@1984AP]

My rear door plastic handle-surrounds look grey and not as black as the front ones do. Those are original. I bought the rears in 2014. I don't know if BMW is making them cheaper or what. Or if I should buy a used set, pre-2005 or so. Your replacements look nice.

[@dylanrc2994]

Exterior door handles, pads and gaskets e34, e32, e31 - available for sale

[@cya3651]

If anyone is wondering, you need to push the clip with a screwdriver straight towards the front, not side way. Then slowly pry out the door trim once the clip is pushed all the way. The video looks like he was pushing sideways to pop out the trim. I damaged two door trims before I figured it out.

[@kwatoggurutv109]

And installing what is the process do i have to pull the or push the mechanism again?

[@cya3651]

@@kwatoggurutv109 installation is the reverse. 1. You need a long piece of metal and bend one end into an “L” shape. 2. Place the L shape tool behind the same area where you had pushed it(as shown in video) 3. Once hooked, now PULL straight backward to slide the mechanism back. This will lock the door handle trim in place again.

[@kwatoggurutv109]

@@cya3651 u mean just pull it back? Straight or upward downward coz when i pull nothing happen do i need to put force?

[@cya3651]

@@kwatoggurutv109 Watch this KZbin video how to push and pull back. kzbin.info/www/bejne/mmGUZqquYpqliK8

[@isaacrodrigueztoribio9876]

Danke

[@fredsshed266]

Thankyou, mate

[@alexandruc.5128]

Thanks man

[@BIMMERZEITT]

cheers bro

[@vexvex513]

Lol.... You showed everyone the easiest part- rear handle