BMW E46 318Ci M43TUB19 - Cold Start, DISA is damaged. Adjuster unit 11611438404, 11 61 1 435 715
Пікірлер: 19
@MrJohn44jackass2 жыл бұрын
I have the same engine and i took the plug from the disa unit. My engine runs better then before. Greetings John
@MaliciousMatt8883 жыл бұрын
I have a 03 325i with 160k miles and when the shop took my disa valve off for inspection they said it looked perfectly fine, I was quite shocked.
@DJMyMhouse6 жыл бұрын
Hi, i found your video and by coincidence maybe having similar problems... What are your symptoms on the car?
@hmmUnMomentum6 жыл бұрын
It might be several, mostly noise from disa as shows in video. It's worth first check your eg noise on cold start
@DJMyMhouse6 жыл бұрын
I don't know if for example power decreased, but i recognize noise very similar to the one in video. It starts around 20 seconds after turning on on cold start and ends after around minute... Also there is clear change in behavior of the engine when it warms up. It goes much smoother after.
@DJMyMhouse6 жыл бұрын
How did you repair the DISA valve?
@hmmUnMomentum6 жыл бұрын
UnoMomentum I boght on ebay and changed it. I suggest to check with working car, try to take parts from working car and see difference, check MAF, sparks etc. if you can do it, if not first try Diag.
@joostridderhof83210 жыл бұрын
Hey i'm about to buy the same car; did you fixed the problem? What was it?
@hmmUnMomentum10 жыл бұрын
no, not yet, but changed spark plugs with original BMW NGK iridium model, changed MAF, changed petrol filter, checked air housing, no problems. only left to change DISA or Fix it.
@hmmUnMomentum7 жыл бұрын
I suggest to check with working car, try to take parts from working car and see difference, check MAF, sparks etc.
@josephmnisi-lt2ci Жыл бұрын
How to put back the gearbox
@hmmUnMomentum Жыл бұрын
Hi Joseph, can you describe your problem ?
@rondjeee4 жыл бұрын
CCV
@RMFUNTIK8 жыл бұрын
there is no disa on 1.9
@hmmUnMomentum7 жыл бұрын
yes where is! and i'm showing in this video, you can also hear disa noise
@ukaszfilipek33567 жыл бұрын
M43TU B19 [77kW] without DISA M43TU B19 [85kW] with DISA
@Bemaritohtori3 жыл бұрын
316i doesn't have and 318i has. I just retrofitted disa to my 316i and ran 318i software to it. Now it's basically 318i
@vronik32713 жыл бұрын
@@Bemaritohtori I wonder if you can put the blank from the 316i to a 318i and if it would run fine? 🤔