BMW F10 2016 9 Colours Ambient Lights Full installation+Coding Part 2

Hi all, in this video, I will show u how to install 9 colour ambient lights on the rear door+connection to IDrive and coding, thanks
my Instagram.
@yourambientlight.
Install the app to follow my photos and videos. www.instagram....

[@depakkumarmistry7051]

Hi I finally installed these lights and have to say what a transformation of the car. Your instructions were very precise and made the process very easy. The added bonus was I was not aware that you could also dim the lights using the existing control. Thank you

[@mrpullafastone]

The best retro fit on a f10 I've seen!!

[@depakkumarmistry7051]

I bought these lights but came with no instructions. After watching part 1 & 2 I am very confident on the procedure to follow and planning on attempting this when the sun shines in the UK. Great video and thank you.

[@yourambientlight]

Thank you tried my best

[@mab0738]

Where did you buy the lights and what is the name of the light package?

[@mark.m2163]

Amazing work

[@jogarr251]

can you share the link where you ordered the lights? Please

[@bilalbaouia6933]

Thank you so much this is the most detailed video 📹 you are amazing 👏 I have a quick question my F10 BMW 528i already comes with ambient light do I need the door wiring again? Or just change the LED ?

[@yourambientlight]

Thanks, yes u need new wire everything like in video and u have to remove original Ambient light

[@tarakonas13]

Hy, if you have nbt 2013 you don’t need to code it?

[@ekrem5724]

Hello this is great work congrats, how much cost this including intstallation, thanks

[@_.mustafaahmed22]

Can this be done with cic system

[@dassgas]

Iis it possible to mount the panel from the wiring harness only at the original light locations?

[@AnhKenDy]

Hello. I have a bmw 520d 7/2014, can I install this set of led lights? and can i code it to change color

[@cookzthebarber1899]

These have been the most detailed videos I’ve seen on how to do this thankyou so much I’ve had my set of ambient light for over a year but couldn’t find a way on how to code and install them ! I have a 2016 bmw 340 is the coding the exact same way? And the 16 pin connections would I have to do that as well because I believe I have nbt !

[@yourambientlight]

Thanks, yes everything is same,

[@cookzthebarber1899]

@@yourambientlight thankyou I also tried to on my f30 but the connections in between the door pillars are different on my f30 from the f10s you do any advice or videos for the f30?

[@yourambientlight]

@@cookzthebarber1899 doesn't matter, find 4 empty pin and plug them just be careful from other side they should match colour to colour

[@cookzthebarber1899]

@@yourambientlight the problem is the assembly doesn’t come out as easy as it does for the f10 on your video I was hard stuck on that part but I got the coding and all thanks to you

[@cookzthebarber1899]

I tried pulling the assembly cover off but it doesn’t peel back to reveal the wires

[@sgredbull1184]

Probably going to sound dumb, But is bimmer code the only thing needed for the coding ?

[@robinmellumhornberg4134]

What about coding on nbt late 2012?

[@leodarvin]

Hello... just one question... I want to install ambient light on my car but I don't have ambient light at all from the factory... is it possible to code then via CAN box as you showed in your video... do you have to connect all the lights via CAN box or... thanks

[@yourambientlight]

thanks. If your car is nbt after 2014 is posibke to cide If CiC no only from radio buttons

[@adrianionita6352]

How much would you charge for bmw f01 2015? Thanks

[@matty3603]

Whrer did u got the lights? Can you give me a link or smth?

[@AsmensHZ]

Hi! There is no possibility to upgrade the software for more colours? On my 535d 2015 I've only Classic and Modern colour.

[@Toliani4]

Control box will give you that

[@govindsharma9087]

Hey , I am located in Delhi , India. I want to install these ambient lights in my BMW 520D. Kindly suggest something. I would be more than obliged. Thanks

[@cookieblox7247]

Hi were do we get that pls let me know

[@kashifhussnain7456]

your video is amazing with details everything what we need ,i have 320d 2017 , I'm stuck with coding . is it same code should I use for ambient lights 9 colours?

[@yourambientlight]

Codding same for all bmw

[@kashifhussnain7456]

@@yourambientlight thanks 😊

[@rogercisneros6166]

Do you have a kit that fit or can be use on a bmw x4 2017 xdrive 28i? Do u provide instructions so I can do it myself? I’m located in the USA. I understand u are in Ireland. Do u know anybody in the use that sells exactly the same products like you? You do and excellent job, very nice, clean job and classy, any information I will really appreciate. Thank u in advance!👌👍

[@yourambientlight]

hi man ,there's ni kit for X4 only if u buy universal optic tube or acrylic but that's cowboy style

[@depakkumarmistry7051]

Hi I came to install the lights and find that my idrive has 10 pins but connector to module appears to be 4 pin. When you powered up the lights do you see a red light inside the module and does that flash and then switch off or does it stay on all the time. Also I find that the first 4 wires in 10 pin and 4 pin are the same. Can i hook the 4 pin wire to this and plug the module in

[@yourambientlight]

@@depakkumarmistry7051 it should blink also u may need to check dose dip switch 1down 2 up is cic or nbt if otherwise cic i both down is nbt button control

[@depakkumarmistry7051]

Hi when you say dose dip switch, I guess that would be inside the module box. Is that correct ?

[@yourambientlight]

@depakkumarmistry7051 theres 2 little switches

[@taulandkryeziu2530]

Brother i mount the same kit with nbt system , the problem is the dors are not lighting up , all the others are doing well , what i did false , thank you !

[@yourambientlight]

Check cable pin if colour are same on the door lom

[@marno2596]

Hi there, i have the original ambient light (only orange) in my F10 2011. can i also install the 9-colored ambient light there, i have the cic system and i don't want to program anything. Thank you in advance.

[@yourambientlight]

So u have to remove your original optic tube u not need it

[@yourambientlight]

Intro 387 if your system is CIC u don't need to code .u can change colours by pressing button on radio 4 or 5 few sec to acctivate them after 6-7to change colours

[@marno2596]

Ok thanks

[@SRTRELL]

@@yourambientlight which button

[@yourambientlight]

Did u installed them.u need cic module for lights, if u connected and they flashing up white color. Now u have to press and hold few sec button 4-5 on the radio fee sec then 6-7

[@mehmetkalkan9807]

I have a 2013/04 NBT , how do i need to do it ?

[@shadiomar4193]

Did you experience any buzzing/static noise from the speakers after installing this kit?

[@yourambientlight]

No bro there's nothing to do with speakers,

[@cristiandragan124]

Salut! Dacă am deja luminile ambientale instalate (alb, portocaliu), mai trebuie să demontez toată mașina? 😂 Sau pot înlocui doar "stripsurile" din uși? F10, 2016. Mersi frumos.

[@yourambientlight]

Trebuie sa scoti tot,si sa face aceiasi procedura,plus ca tuburile trebuie sa le arunci ,la fel ca plasticul ala care tine tubu,succes

[@cristiandragan124]

@@yourambientlight N-am de gând să mă bag în așa ceva, dar o idee despre cum aș putea să leg un tub de neon (sau altceva), care să pară cât mai original, pe bord? Curent mă gândesc că pot lua de la luminile de la picioare, să se aprindă doar când se aprind și cele de pe uși, etc. Mersi anticipat!

[@yourambientlight]

Daca vrei sa ea foc punei tube neon)))

[@5ivepillarsofislam]

How much will you charge to install?

[@cristianursu1771]

Hello. I have done everything the same but in the end my idrive controler not working and ambient is not lighting. I have worked with car battery unplugged. What can be ghe problem? I have checked some fuses but I don’t know which one is the right one . Thanks

[@yourambientlight]

Inseamna ca nu ai facut ceva cum trebuie,sincer nu pot sa te ajut pentru ca trebuie sa fiu acolo si sa verific,daca esti linga bucuresti scriei lui Marius Patrascu,

[@tobitobs09]

I have the same Problem

[@glucian71]

Salut, astăzi am reușit să le montez și eu pe mașina mea. Un f11 din 2017 cu lumini ambientale din fabrică. Cele noi stau aprinse și pe timp de zi față de cele originale care se aprindeau doar seara. Este vreun mod de a le face să se aprindă doar seara când se aprind și farurile, exact că cele originale? Mersi frumos

[@yourambientlight]

Nu poti numai manual,sa ke syingi sau sa aprinzi ,daca ai codat si masina e nbt poti din meniu ,daca CIC atunci tii apasat pe 1 la radio

[@glucian71]

@@yourambientlight da da am codat totul cum ai făcut tu, great video💪. Deci este normal să stea aprinse tot timpul. Am observat că rămân încă 10 secunde circa și după închiderea mașinii. Felicitări încă o dată pentru tutorial

[@jasony486]

Hey mate, at 6:35, are you drilling a hole or just stick away the plastic on the pre drilled hole from factory？

[@yourambientlight]

If u have 1 colour from factory have to remove and stick behind

[@jasony486]

@@yourambientlight Thank you for your reply. Does that mean if I don't have the light package from factory I don't have a pre drilled hole？I don't want to do any damage so I ask these questions. Also I noticed, f10 of all years share the same door lining part number. So I assume they all should be the same, i.e. with a hole from factory？

[@yourambientlight]

@@jasony486 bro if u don't have from factory u have hole a f10 have ,just if u have u have to cut and remove optic tube and holder if u don't have is better because u don't to remove anything, just stick stip behind

[@jasony486]

@@yourambientlight Thank you very much for your reply mate. That is really helpful.

[@tracyhill6166]

I have a 2016 M4 with door ambient lighting but not dash ambient lighting. Can it be retrofitted? I'm in the US.

[@yourambientlight]

For m4 they are different,

[@GodKing804]

I'm in united States, where do I order the kit?

[@igorromanovsky9565]

Great video!! How the process will different on CIC models? (except the coding) Thanks

[@yourambientlight]

Everything same just change colours from buttons 6 7

[@igorromanovsky9565]

​@@yourambientlight thank you for the answer. is the module also connected like here? kzbin.info/www/bejne/Z5_ImZJqrrNnrKc

[@yourambientlight]

@@igorromanovsky9565 yes but ask your seller for CIC cable as sometimes they different than nbt

[@igorromanovsky9565]

Is there something that I need to consider if I already have the OEM lighting?

[@cavidshukurov9347]

@@yourambientlight hi bro, i don’t have colour_switch_ensemble, what should i do?

[@stefanstanisic2311]

I have a 525d 2013. NBT. The seller says I should buy CIC because controls can't be coded in on models older than 2014. I just can't believe that. Is it true? Also I have every module in bimmercode to code it just like in the video.

[@tarakonas13]

Same issue, witch one did you installed? Cic or nbt ?

[@stefanstanisic2311]

@@tarakonas13 Installed nbt, coded it in, but for some reason it didn't work. Seller sent me the manual on how to convert the module from nbt to cic so it wasn't all for nothing

[@dizzro]

@@stefanstanisic2311hey! By any chance can you send me the manual on how to convert the module? I just received mine and I have a 2013 535i with NBT but now have read ur comment and realized the issue that will arise.

[@vitaliynackevich]

So it's not working on NBT's before September 2014???

[@SimSimmaWhoGotTheKeys2MyBimma]

Hi, after fitting the same kit, my idrive controller doesn’t work? I haven’t coded it yet. Please let me know thanks

[@xxx999xxx-]

same issue, idrive controller stopped working, f10 lci

[@yourambientlight]

Lads make shure wire not mixed ,did lots of the Didn’t happened never but may be

[@GhOst-ks3pf]

Hey i have a question first sorry for my english, i have installed the same light set for nbt and the leds are on ( the car is closed the ignition is off and the leds all are on dont go off they go off after 5-10 min but if i turn my light switch on 0 the led light is on what can i do?

[@yourambientlight]

Hi man,u have to cut brown wire before idrive and run to fuse under storage box

[@yourambientlight]

Find ignition that is switched off after u take key of is yellow one 20A

[@GhOst-ks3pf]

Oh okay because i habe buy the set and its say plug and play they said i need nothing to cut… you mean the brown wire from the box ( that is connected with the idrive controler ? On your video i dont see the cut

[@GhOst-ks3pf]

I have write to you on Facebook thanks for your answer

[@yourambientlight]

@@GhOst-ks3pf sorry man not have always time to reply, have hundreds of messages

[@TheCypriotSoldier]

Can you install this on my f10? And how much would you charge

[@yourambientlight]

I'm based in Ireland. DUBLIN u can find my page on fb same name as youtube channel

[@turbobandz4269]

@@yourambientlight Hi what is the name of this product

[@cristycrystyan9643]

Hy all! I have one problem! 4 or 5 colors it's the same color green! I dont have all colors! Why???! It's nbt 2016 f10 it's coded

[@petarsotra2710]

Hey man, thanks a lot for this video! I did everything the same, but when I started the car, none of the lights are working (the idrive controller is working though). The module is powered, I've checked the module to the lights connection and that's okay too... Do you have an idea what could be wrong?

[@Toliani4]

Scroll up and down side light brightness control

[@petarsotra2710]

@@Toliani4 the module turned out to be faulty, thanks though :)

[@dizzro]

@@petarsotra2710hey did you order a new module and it worked? I just installed mine and has the same exact issue as you, when I connected my module it literally caught on fire lol. But are you NBT or CIC?

[@petarsotra2710]

@@dizzro Yeah, the seller sent me a new one and everything worked properly after installing it. I have nbt.

[@dizzro]

@@petarsotra2710 do you know how it works for pre lci NBT? Because my car is 2013 but NBT so I ordered the NBT module and it fits my cars idrive but do I have to code it since I don’t have the lighting options that the LCI has

[@RealtorCardozo]

Do you have a link to the kit?

[@marioslipsos7756]

What do you do with the oem ambient light connections?

[@yourambientlight]

Nothing, leave under,fix with zip toye

[@Ste_O_D]

Do you know how to code the colours to their proper names?

[@yourambientlight]

Is long way

[@yourambientlight]

Better to leave that .there's somewhere on KZbin. But that paint in the arse

[@ian.eriksson]

@@yourambientlight Can you maybe link it? im willing to take on a challenge!

[@mrcuddlesworthbear]

@@yourambientlight can't find kit for F12. Can I use this kit for f12

[@MrFlash4203]

I wish I could do this as well.

[@salvatorestuppia7850]

Dove si può acquistare il kit?

[@naddyali2984]

Hi. Is it same fitting for cic model?

[@yourambientlight]

Yes,but u don't need to code for CIC models

[@dze9587]

Will this work the same way for E60 models?

[@yourambientlight]

No that's special for f10 only

[@zorillaa]

Another level of complicated... i was into doing it, but i lost it after first cable getting into drivers door...

[@muzafarsadat7321]

Hi! I tried to code it with bimmerapp but only „classic mode“ popped up. Do you know why?

[@yourambientlight]

If your car is CIC is only 1

[@yourambientlight]

U have to use from radio buttons, also u have to change taht on module, coding is only for cars after 2014

[@muzafarsadat7321]

I know but i had to choose on the module „nbt colour switch“ cic didnt work so i assumed is nbt.

[@muzafarsadat7321]

But yes my car is 2013

[@acoranes]

Hello, is it possible to add colour option on nbt before 09/2014?

[@yourambientlight]

Is possible but u will not have access in idrive and u don't need to code just have to pres few sec radio button nr6 to change i have video with black f10 that's 2011

[@acoranes]

@@yourambientlight my car is 06/2014. I have nbt id4. I think if nbt after 09/2014 have this option, it’s just software. So it could mean that nbt need an upgrade. ?

[@yourambientlight]

@@acoranes u can try to acctivate maybe will work

[@andidenaj5891]

Does it work with f11 too? If yes does anyone have a link to this?

[@dzooky]

yep it will works

[@AnnerMorales-8990]

can i do it on my f10 535i xdrive 2012?

[@yourambientlight]

Try))))

[@muzafarsadat7321]

I have an f10 05.2013 do you think i can still code it?

[@Toliani4]

Yes

[@muzafarsadat7321]

@@Toliani4 wasnt possible, you need to have the nbt iDrive, otherwise it wont work. Or maybe you could do an update.

[@Toliani4]

@Muzafar Sadat you can buy unit for the CIC and you don't need to code, to change light you gonna have to press buttons on your radion unit

[@stefanstanisic2311]

Do you think coding would be possible on a f11 06.2013. with NBT?

[@yourambientlight]

If is nbt yes ,unless car had cic and screen was upgraded to nbt

[@rrtonyl]

Did it works on f11 2012?

[@yourambientlight]

Yes but colour u can change only from radio buttons

[@cookieblox7247]

Where do we get those ambient lights etc

[@Toliani4]

China

[@pavelk2007197908]

Hey! Where can I buy?

[@yourambientlight]

€ 124,32 46%OFF | For BMW 5 Series F10 F11 F18 2010-2018 Car Neon Interior Door Ambient Light Decorative Lighting Automatic Conversion 9-color a.aliexpress.com/_mMPsmWA

[@yourambientlight]

But u have to choose DHL shipping is 4 euro more and it came in 7 days

[@pavelk2007197908]

Спасибо!!!

[@yourambientlight]

@@pavelk2007197908 пожалуйста

[@rogercisneros6166]

Hi ! Do u have a kit that fit and can be use on a bmw x4 2017 xdrivve 28i? Also do you provide details instructions so I can do it my self? I’m located in USA. Do u have any idea if someone in the USA sells exactly the same products like you! Thank you in advance!

[@hasancelik1037]

work this on e60?

[@yourambientlight]

No