Bmw x5 e53 hack air suspension repair cheap

[@p4bl0escobar69]

I have done this to my 2005 Range Rover Vogue front and rear and it was working perfect.

[@sssds8573]

Superb job

[@pc7225]

creative! just like a manual air bag setup 👍🏻

[@sssds8573]

Best way pal

[@dylan6able]

Did you use a female m5 thread adaptor as the valves are 1/8 in smallest size from that website ?

[@sssds8573]

Best to give them a call mate

[@selfmade176]

Where is you get the shut off valves

[@sssds8573]

I vent with pipes to the commercial trailer supply shop to get them shut off valves.

[@Prikki2k]

@@sssds8573 This is brilliant man thanks for posting it.

[@sssds8573]

@@Prikki2k how it finds you well mate, mine air suspension not going down for a few months atleast , if you make and test the connection with foam spray and add some pvc tape then it's not going anywhere

[@Prikki2k]

@@sssds8573 Thank you Sir, you're a Gem.

[@dylan6able]

What size is the valve tryna eBay one ?

[@dinkaman2160pukka]

nice! where do you get the cut off valve from (UK)?

[@sssds8573]

Hello sir www.contextpneumatics.com/

[@dylan6able]

What size valves did you use and was it male or female about to order and try this method

[@sssds8573]

The shut off valves?? With like a tap I'll try and find out thanks

[@dylan6able]

I bought the smallest size valve from that site but they don’t fit onto the air cable on the car, you buy an adapter aswell ? As the cars end is smaller than the 1/8 on the valve

[@johnnyrosado232]

How can you do dat to the front ones

[@sssds8573]

You need to find particular air lines for the front and use the method hope it helps

[@carmodkings9500]

i hate when they don’t list the size or where they got it from what’s the sense of the video

[@sssds8573]

Hi matey sorry I went to the truck and trailer shop to get those valves ill add the discription of them thanks

[@albertodlr3008]

Can you list the sizes please and thank you

[@davidaslani1572]

What about the suspension light on dash?

[@sssds8573]

Hi mate you would have that on the screen unless you unplug suspension sensors on the rear suspension or fuse thanks

[@jaysonrathel7859]

Any chance to let me know how much PSI to use so I don't over pump

[@sssds8573]

Hello... Emmm just look at the space between the wheel and the wheel arch about the 15 to 20cm would be ideal

[@sssds8573]

Hi mate emm for the rear end wheel clearance i would use approximately 15 cm from wheel to arch in height I have to double check with psi as I am made some new hacks with the pump thanks

[@davidthecavemansweeney5860]

💯

[@kaibintech]

nice video!