Your BMW M2, M3 or M4 needs this for big power - Mishimoto intercooler DIY

  Рет қаралды 875

BMW DIY Guy

BMW DIY Guy

Күн бұрын

Join this channel to get access to perks:
/ @bmwdiyguy
Check out my new branded gear!
www.ebay.com/s...
Nimona: The G87 M2 build out
g87.bimmerpost...
Lillith: The F87 M2 Competition build out
f87.bimmerpost...
Furiosa: The F32 435i build out
f30.bimmerpost...
Keeping your intake temps as low as possible is a vital part of any build on modern BMWs. Lower intake temps mean cooler, denser air which translates directly into more horsepower. The Mishimoto intercooler is a great way to add performance and remove the weakness of the stock plastic intercooler.
Required parts and tools:
Mishimoto S58 intercooler
www.kiesmotors...
10mm, 13mm, 15mm, 16mm, 17mm (21mm for G80s) 25mm socket and wrench
E18, E10 reverse torx socket
pick tool
plastic trim tool kit
Jack and jack stands, or Quickjack (highly recommend)
4 gallons of coolant
torque wrench
impact wrench
T30, T40 torx bits and driver or wrench
heat gun
4mm, 3mm, 2.5mm allen wrench
Coolant bleed directions:
Adjust the fill level in the coolant expansion tanks to the maximum mark.
Close the sealing cap on the coolant expansion tanks of cooling circuit.
Connect battery charger.
Activate testing-analysis-diagnosis (PAD) by quickly
pressing the START-STOP button three times.
Set heating to maximum temperature.
Set the fan to the lowest level.
Depress the accelerator pedal and maintain for 15 s;
do not press the brake pedal during this process.
The automatic cooling system bleeding procedure is
initiated. Step off the accelerator pedal, do not touch the brake pedal.
Depending on the equipment specification of the
instrument cluster (KOMBI), ("Service function
started") is displayed.
Once system says stopped, or pump has stopped operating (can take up to 11min) press the brake pedal.
Check fluid levels and top off if needed and repeat until the tanks are no longer low once the process is done.
*important* If using this process, I keep at least a half jug of coolant in my trunk. Check frequently over the next few days for tank levels and top off as needed.
Nice to have:
Proper power tools for any project - Dewalt 20v Max are amazing
www.lowes.com/...
Good lighting
www.amazon.com...
Great music - Larkin Poe is just amazing, check them out!
www.larkinpoe....
Thanks for watching and please try everything at your own risk. All work shown in best faith and effort, do this at your own risk.
This description may contain affiliate links. By purchasing a product through an affiliate link, you'll get the exact same price and may earn a small commission. By purchasing products through affiliate links, you're helping make this channel possible and we want to thank you for your support!

Пікірлер: 10
2021+ BMW G8X M3/M4 Intercooler Install Guide
25:46
Mishimoto Automotive
Рет қаралды 3,6 М.
Миллионер | 2 - серия
16:04
Million Show
Рет қаралды 1,3 МЛН
Бенчик, пора купаться! 🛁 #бенчик #арти #симбочка
00:34
Симбочка Пимпочка
Рет қаралды 3 МЛН
🕊️Valera🕊️
00:34
DO$HIK
Рет қаралды 6 МЛН
How I Turned a Lolipop Into A New One 🤯🍭
00:19
Wian
Рет қаралды 10 МЛН
The Tesla Robotaxi is Confusing...
19:14
Marques Brownlee
Рет қаралды 2,3 МЛН
Lotus Emira Titanium Exhaust Installation DIY
29:53
Forum Foundry Films
Рет қаралды 1,3 М.
UNSTOPPABLE! NEW BMW M3 CS vs Heavy Traffic! // Nürburgring
11:26
Misha Charoudin
Рет қаралды 627 М.
Are Golf R Engine Internals Better than a GTI?
16:50
Deutsche Auto Parts
Рет қаралды 220 М.
CSF BMW S58 "Level Up" Charge Air Cooler Manifold Intercooler Testing
20:55
DIY: BMW M2 Oil, Differential & Manual Transmission Fluid Change
15:41
Миллионер | 2 - серия
16:04
Million Show
Рет қаралды 1,3 МЛН