Nice concept with the battery box. What i would do is flip the two bolts upside down. Weld the nuts to the cap, with the bolts mounted to the bottom of the battery box. Then when you unscrew the bolts, the cap is free to be removed.
@christiannies89455 жыл бұрын
YUPP. IM STILL CURIOUS HOW THIS IS ALL GONNA PAN OUT....
@matslundberg12895 жыл бұрын
Batterybox was fine from start, no need to remove the bolts, just unbolt and lift battery with the top and bolts.
@OutbackOutlaw5 жыл бұрын
Got my fix!
@richardfruge32754 жыл бұрын
That battery and that welder nice combination.
@daves4yah5 жыл бұрын
She's coming together man, nice job!
@judsonl89904 жыл бұрын
Nicely done man. You've got great problem solving and fab skills. I'm digging the channel. I'm building a 1980 Ironhead chopper and I come to your channel for ideas for problems I'm sorting out. Keep it up!
@ronniecurnutt43095 жыл бұрын
Battery strap,,,, old leather belt. Easy
@stratosjeff70075 жыл бұрын
you're pretty good at metal fab...nice job
@thomasgarcia78265 жыл бұрын
Nice work, Looking great!
@roberthoy99225 жыл бұрын
You did good on that battery box. Much better. Can’t wait until I start my build. It’ll be 100% after market. Keep doing what you’re doing. Change the angle of the bolts. Top comes forward and the nuts tilt and go back. But not much on either one. It will still look good.
@pgrayrk5 жыл бұрын
As always you did a nice work. After looking at that bike it would be really cool to see you put like a 4 into 1 header that's built like a side pipe on a car I have built one similar to what I'm talking about wish I could send you a picture
@Jonathan_Doe_5 жыл бұрын
Coming along really nicely now!
@Gunter85715 жыл бұрын
Get a smaller battery and a wide rubber band whit hooks to keep it in place
@allenwalker15704 жыл бұрын
nicely done on the brake assembly i like it
@823peterdotie5 жыл бұрын
The idea with that battery box is actually good. If you unscrew the bolts you don’t actually have to take them out, you can just remove the battery to the side with the top and unscrewed screws in it. The only thing it could be welded was the bottom part of battery box but thats the way it’s probably going to be. Sorry I’ve had to pause to make this comment and I actually don’t know if you’ll come up that you’re issue is no issue at all. 😉 Im just not sure about those nuts welded to the bottom part....Personally I wouldn’t trust them to much.
@fmscooter7685 жыл бұрын
love your videos dude!! keep up the good work
@arizonarider69985 жыл бұрын
Bike is looking bad ass ! How about a smaller speedometer. Oh and thanks for not playing your Madona cd this time ! Ha Ha !
@brenhoey31153 жыл бұрын
Love your work lad greeting from Liverpool
@lassicripper5 жыл бұрын
You can install speedometer on the top of the gas tank
@LoboProject5 жыл бұрын
Nice.. i also have build chopper video from scratch to finish
@stephenmoncrieff20564 жыл бұрын
I look at the battery box and keep thinking the strap is too close to the terminals . An easy way to short it out .
@NHEFF094 жыл бұрын
i was thinking the act same
@busyb59125 жыл бұрын
digital speedo that bolts to the risers... #dimecitycycles
@lassicripper5 жыл бұрын
Great work
@JohnOConnell5 жыл бұрын
Battery Box - You could / should have mounted the original retaining bolt fittings diagonally - bottom/rear to top/front. The bolts would then clear the steel tank. Not everything needs to be vertical:-) Nice work, though.
@ssamotorsfinland5 жыл бұрын
Great video
@rude19925 жыл бұрын
Order an all in one meter. Digital speedo would be nice to see how to install. Makes a nice video I think.
@jacobwalz75445 жыл бұрын
So many people hate on this guy and his builds ... let me say that again .... HIS builds ... why though ? He’s not charging you $ for building your custom bike he’s literally building a bike his way and raffling it off and that’s awesome weather or not it’s “perfection” or isn’t done the way someone else would do it is ridiculous and if these people really did custom bike builds theirselves then they would realize it’s a flow and go somethings happen and the original idea has to change instead of bitching on his KZbin channel why don’t you make some videos of you customizing anything at all and let us judge your Workmanship... I’ve had some oops and shit I should have done it this way moments myself and any body who’s man enough to do anything close to work like this will say the same ... get off his nuts and get off his bike go do your own shit 🤘🏼 Love the builds you do MP keep it classy and keep building
@MegaRhettButler5 жыл бұрын
Completely agree. There are just a lot of assholes in the KZbin biker community. It's really toxic compared to say, the KZbin gun community. Look at the comments on just about any build video and half of them are from shit heads talking about how something isn't authentic or how they could do it better. Look at a riding video and the same pricks are nit picking how the dude rides or saying they aren't a real biker because they're wearing too much/not enough safety gear.
@BerserkerNick5 жыл бұрын
I build bikes in my spare time and I love his work, really think it's awesome that it's an unconventional bobber build, not a harley or an xs650
@Elvirth245 жыл бұрын
Honestly he builds stuff exactly like I do. I built custom battery/side boxes out of ammo cans for my 1982 Virago 750 and most people would probably shudder watching me work, but they work and don't look terribly. I don't know how many commenters actually build their own shit for their bikes, but it's more difficult than you might think. I tackled a full stainless straight pipe exhaust for the same bike last year and boy was that challenging!
@patrickseynave50745 жыл бұрын
bravo beau travail !
@outofthenorm72925 жыл бұрын
I like what your doing, only thing I would like to see you tackle is doing some fab work on your tanks to make them sit level to the frame and motor.
@leehuntley1894 жыл бұрын
Countersink them bracket holes and use Allen head bolts....much cleaner
@BerserkerNick5 жыл бұрын
Any ideas for paint yet? I think this would look awesome with a gloss black powdercoated frame, since it's a honda I think it would look awesome with dark red paint heavy on the metal flake 70s style, the Honda wing logo in gloss black on the side of the tank that doesn't have the fuel gauge, the motopilot logo on the oil tank/electrical box, and stickers from all the sponsors on the rear fender.
@tezocsdad5 жыл бұрын
Would of used springs on the battery box to replace the bolts but still cool
@illduitmyself5 жыл бұрын
you should kill the power tool noise during editing. good work man
@Elvirth245 жыл бұрын
I think the only thing I would have done differently on that battery box is to make tabs and drill and tap instead of welding nuts on- more metal to get a solid weld on that way, less likely to fail.
@claytonhaske5 жыл бұрын
mount the speedo on the side of the forks, down by the disk brake itself.
@vaultstory5 жыл бұрын
turn battery sideways its lithium it dont need to be up and down
@crjolliff5 жыл бұрын
Is it too late to enter to win the bike? On your Patreon It says "... ends 5-30-19 at 12:59pm PST..."
@MOTOPILOT65 жыл бұрын
Not too late. Thanks for the heads up. I need to push that date back. MP
@crjolliff5 жыл бұрын
@@MOTOPILOT6 Awesome! I wasn't sure so I just signed up for the beginner tier... Guess I have to upgrade now!
@gromzen5 жыл бұрын
@@MOTOPILOT6 I also have a question about becoming a Patron. It shows the highest tier being $15 per video, is that back dated to the first video as well and paid in one lump sum, or, is it only on new videos? Also, is it possible to simply make a donation to the build out of enjoying the content and supporting what you're doing?
@Silverwinger825 жыл бұрын
Is that battery strap going to interfere with connecting cables to the battery? It looks pretty close to the terminals.
@simonthiboutot67013 жыл бұрын
had fallow that speedo with the front brake on the other side of the thank instead
@biggrimm75055 жыл бұрын
Make a bracket and bolt it to the tube clamp on the top triple tree that's where I put mine
@oldschoolmotorcicle29695 жыл бұрын
Show colega sou seu fan aqui do Brasil muito bom trabalho; também faço umas customização por aqui
@NickRusty5 жыл бұрын
Well, the idea of disassembling the rear brake system just to remove the battery gives me a headache..
@Александр-ъ8ь1г5 жыл бұрын
отличная работа! жду дальше...
@mattkoontz55175 жыл бұрын
BRAAAAP
@missioncapable46583 жыл бұрын
I built mine from a scrap bed frame.
@fkingride.55004 жыл бұрын
6:367 if it gets wet it will short the battery tho !
@saurabhbagal18005 жыл бұрын
Make a video on how to make one helmet like yours 🔥🤤
@davesleyer93935 жыл бұрын
Is it a sin to put a digital speedometer on a bobber? The new street bobs have them. I like them because you can barely see them
@klemerrrChannel5 жыл бұрын
Enak kalau peralatan komplit bisa membuat apa saja bisa
@paultwood51705 жыл бұрын
Gps speedo-No need for cable
@TheADHDFarmer4 жыл бұрын
What wire type/ shielding gas combo is that? I like the way those welds turn out.
@kenball19805 жыл бұрын
Just weld in lower battery tray and strap down battery with a rubber strap. Edit: I should have waited till the end to comment, nice solution!
5 жыл бұрын
top
@devil6spawn5 жыл бұрын
Lol I see should of done this or that it's funny coz if he new what he was doing take the bolts out turn upside down weld the in and put some what us uk ppl know as butterfly nuts on but USA know as wing nuts jobs done no extra work so what's next and with speedometer get a smaller cable or make it fit it's a build right lol
@tryordiegarage4 жыл бұрын
Aaaarrrggghhh! Too late but just kept shouting use threaded rod for the battery box welded washer at base so wont pull through with a knurled nut up top!
@EGYPT_REEF5 жыл бұрын
check motogadget stuf ..small and retro
@best1yet5 жыл бұрын
whats the name of the metal band in the background? 21:21, 23:56
@danielchervin3 жыл бұрын
1:10 Pac-Man
@mattschultz63564 жыл бұрын
Yo, welding way too cold man. Cringing through your welding sections. Obviously work for what you're doing but even after grinding you can see your welds were too cold
@zippy3503 жыл бұрын
Soooooo you fit a nice lightweight Lithium battery then fabricate a battery box to hold a lead acid truck battery 🤦♂️
@oldfellafpv77705 жыл бұрын
wow honestly lets just build it and see wtf a waiste of time and stock ..
@rene-yvescote39545 жыл бұрын
Again this guy, I can't believe it. Poor design. He does a lot of work to find out it doesn't fit. You could have cut and reuse the bottom of the existing battery box and put a strap to hold the battery. Or better, buy a small lithium battery. So funny good luck............😂