Part 1 of 2 Time lapse Bobber build including AIS removal
Пікірлер: 50
@broke1234 жыл бұрын
Removing the fenders makes VStar instantly look cooler imo
@thejerseyj16366 жыл бұрын
Cool bike, and the extra added attraction of your MGB GT made it double nice !
@abigail_mcleod3 жыл бұрын
I love this bike more than my old HD Sporster cuz its looks more HD Softail . I like your patience building yours to a Bobber Sir. I like the bobber idea but i can not have it because i am not seasson rider, i ride even in minus temp or light snow from home to work or else where . my bike is in my channel if you like to see.
@nooneimportant90242 жыл бұрын
You smack the brass piece out with a file or chisel and hammer and a 45 ACP shell tabs right in leave the lid for the casing out so you can extract it later if you want to
@rolandkeith53226 жыл бұрын
Good Video and Helpful as well.
@simonelomax74654 жыл бұрын
I enjoy them too ;), thank you for sharing.
@whitelightning33304 жыл бұрын
I always wondered what that black thing was on the left side of the bike. Now it seems I can take it off and throw it away
@luiseduardoperdomoortiz98653 жыл бұрын
A mi siempre me ha gustado Las motos y esta en especial perfecta
@cbkeith71106 жыл бұрын
Beautiful job sir!!
@heli-man-3 жыл бұрын
What is it with everyone doing Bobber builds it’s like going backwards in evolution you take off the suspension and put 2 little springs under the seat, just don’t try and ride any distance and make sure all the roads you use are new.
@betternamechosen56782 жыл бұрын
You don't take off the suspension on these to Bob them. They use the stock rear suspension.
@koreybercaw869410 ай бұрын
How do I contact the creator of the video and the page. I have questions about some of his supplies. I have 2 of these projects going on and some of his tools would make things easier
@gavinoliver80743 жыл бұрын
Hi, sorry to bother you. I'm getting an xvs1100 on the weekend and I'm planning on making a bobber from it. May I ask where you sourced your reg plate bracket/light and seat bases/seats from. I watched your 1100 video and was mighty impressed. Love the fit and finish.
@CleanNuts3 жыл бұрын
Blue collar bobbers out of Sandy utah
@gavinoliver80743 жыл бұрын
@@CleanNuts thanks so much for the reply!
@knuckleheadrider55053 жыл бұрын
Hey what seat base did you use and do you have a link to where I can get it...?
@MrJustus88 Жыл бұрын
Would like to know as well
@knuckleheadrider55053 жыл бұрын
Hey Clean Nuts. When can I get the 12mm compressing brass endcaps. I have been advised that here in ireland they only do 10mm or 15mm. Nothing in a 12. Any help you cannoffer in sourcing is greatly appreciated..
@CleanNuts3 жыл бұрын
They are forsale on uk eBay
@pauljenkinson92775 жыл бұрын
Hi there. Great video.Just starting an xvs650 bobber conversion myself. Can you recall which pipes you fitted , and did you need to rejet? Can't wait for the next episode
@pauljenkinson92775 жыл бұрын
Mines a 97 so no AI unit.👍
@coyote1020766 жыл бұрын
My question is, on a mildly tuned Star 650 ( debaffled & rejetted with modified airbox) is there any performance gain from removing the AIS? Or is this mostly just done for visual aspects? It for sure looks much cleaner with all that junk removed.
@CleanNuts6 жыл бұрын
No performance gain from removing AIS its just there to reduce emissions when tested It maybe illegal to remove in some countries I didn't like the way it looked
@coyote1020766 жыл бұрын
good to know. In the USA the legality varies state by state, and in some states can vary by what county of the state you live in. We do not have smog testing here, so I am in the clear if I want to remove mine. For now. Till they do something stupid like ...................... change the law 3 days after I remove it. hahahaha! THANKS for the fast reply!!!!
@flyguythefreakinpuertorica38026 жыл бұрын
Question, is a V star a bobber dragstar but with mods? I’m trying to figure out if they are the same bike. I’m trying to get a 98 VStar 650 and would like to turn it into a bobber dragstar if that’s the case.
@coyote1020766 жыл бұрын
Dragstar is the european name for them - V-Star the American name. Same bike.
@heli-man-3 жыл бұрын
All that powder coating then hand painted cylinders, I bet that looked crap.
@Navalkraft6 жыл бұрын
I'm building an 01 v star myself, where did you get most your parts from. Great in depth vid
@CleanNuts6 жыл бұрын
Blue collar Bobbers Sandy Utah have you seen my other build videos?
@Navalkraft6 жыл бұрын
Ok I was looking at their products and yes I've watched a couple after watching this
@rickandersonnz4 жыл бұрын
@@CleanNuts was it a kit or just a pick and mix
@jeremyfright97105 жыл бұрын
Where's part 2?
@CleanNuts5 жыл бұрын
Jeremy Fright I’m yet to finish it!!!!
@bartweres5 жыл бұрын
Hi could you tell us from where you get this compression bolts for ais pipes. Thanks
@CleanNuts5 жыл бұрын
They are plumbing fittings
@user-yw7so8tn5g4 жыл бұрын
Hello, I am from Iraq. I want a bike engine. Yamaha Drakstar has a size of 650S from America to my country and the amount of money. I thank you.
@bommy6734 жыл бұрын
Whats the purpose of removing the AIS i dont understand
@TheRoadhammer3799 ай бұрын
it just cleans up the bike
@raulcerdakachirisky19155 жыл бұрын
What year is this bike???
@CleanNuts5 жыл бұрын
2008
@manuelhunger86716 жыл бұрын
One kind of Motocycle Lift ist this? where to buy?
@CleanNuts6 жыл бұрын
Manuel Hunger big blue Easy rizer
@manuelhunger86716 жыл бұрын
Found it myself.. THANKS www.on-bike.com/product/motorcycle-lift-stand-eazyrizer-big-blue/
@johnbell89105 жыл бұрын
The lift. Where
@Lewiseyers5 жыл бұрын
What's a.i.s
@CleanNuts5 жыл бұрын
Air induction system it’s a us emission thing
@terrihashimoto11834 жыл бұрын
09:10 09:45 03:51
@maximilianocinquerrui4016 жыл бұрын
Please improve audio. Thanks
@CleanNuts6 жыл бұрын
Maximiliano Cinquerrui good point I’ve bought s new microphone and it’s worse!!!!