Bodywork Laser Straight Body Lines. Tape Measure Method

[@jerrodpatterson8938]

What blocks you using in this video?

[@SYLVESTERSCUSTOMS]

They are Next Level blocks. We have included a link in the description for your continence. We talk about them in more detail in this video. Body Working The Perfect Gaps: The Guide Part II Body Filler kzbin.info/www/bejne/gJ6cg5J_n5h3j9U

[@zivojinnikolic7712]

W

[@Der8cho]

This young man is a natural teacher. These are secrets shared only in restoration shops. Subscribed. Keep up the great work!

[@SYLVESTERSCUSTOMS]

Thank you very much

[@Kustompaint2026]

I worked at a boat yard for 10 yrs doing bodywork & painting custom yachts. In order to get nice straight lines with filler, the crew would hot glue small wood sticks or use various small metal straight edges & glue those to the panel being filled. Afterwards, you could just pull the glued straight edges off then begin your block sanding!! Works on cars too!!

[@SYLVESTERSCUSTOMS]

Nice!

[@deankay4434]

Maybe I have been around a long time, but extra money was made on a "Protection Package" on new vehicles. This included pin stripping! I have seen guys lay this out slack and tack down with one finger every time and it was not pleasing to the eye! I started at the front, pulled the tape with reasonable tension but simply allowed it to lay down where it wanted to be. Following the body line. This allowed it to be straight look proper and then wiping from the beginning gently to "Stick-it" only to come back and rub in. This is different, yet somehow the same. Great video & excellent info!

[@SYLVESTERSCUSTOMS]

Thank you.

[@34SV]

probably best bodywork trick i have learned! just what i need for my car

[@SYLVESTERSCUSTOMS]

👌🏻👍🏻👍🏻

[@SwiftRIBSAust]

Great channel learning a lot as work thru my 68 caddy rag

[@SYLVESTERSCUSTOMS]

Glad to hear it

[@wyattoneable]

It just so happens I have a broken tape measure and was wondering what I could use it for. You provided the answer. Pretty cool trick.

[@SYLVESTERSCUSTOMS]

Haha perfect!

[@JDMSMOKEY03]

I really appreciate the knowledge and u taking ur time to do these vids for us 👊

[@SYLVESTERSCUSTOMS]

👊🏻👊🏻👊🏻👊🏻🙌🏻🙌🏻🙌🏻🙌🏻

[@class5bodyworks]

Tricks of the trade. Pretty slick using the tape measure. Necessity is the Mother of all Invention. Thanks for taking the time.

[@SYLVESTERSCUSTOMS]

That’s right! Thank you

[@ryanmillsap8645]

Ha, I set my lines up with masking tape best I could...then checked with a tape measure & sure enough they were off slightly. Tape measure is the way to go. Thanks for the vid! Oh, I also cut up a perfectly good tape measure. Ha

[@SYLVESTERSCUSTOMS]

Lmao as we were making this video we were saying to ourselves do you know how many tape measures are going to get sacrificed? 🤣🤣🤣 thx for watching

[@KM-uw4ez]

Man your vids are AWESOME! Excellent tips for us DIY guys, thank you!

[@SYLVESTERSCUSTOMS]

Thank you!

[@VintRestGarage]

Blew my mind with this technique. Been using straight metal but not NOT a tape measure which is much easier it seems. Next up and use on my 1973 Challenger. Thank you for the videos.

[@SYLVESTERSCUSTOMS]

You are welcome!

[@ShannonpdpHammond-yy7yh]

our shop teacher in 1992 showed us this little trick, it works pretty good, the stretched tape does happen.

[@GoWithJoeAdventures]

Another great episode! I’m in this stage on a Grand Wagoneer and it helped define my lines and keep us on track in the body work stage. As always, thanks!

[@SYLVESTERSCUSTOMS]

Sounds great!

[@JesseLee-t2n]

You explain things very well sir!! bravo bravo

[@SYLVESTERSCUSTOMS]

Glad you think so!

[@chevelleranch7481]

This is a really great tip Travis! Once again , and probably many more times to come , thanks for sharing your expertise with average idiots like me!

[@SYLVESTERSCUSTOMS]

🤣thank you!

[@michaelkorolev2115]

Great explanation, thanks for sharing your a good teacher

[@SYLVESTERSCUSTOMS]

You are welcome!

[@LTVoyager]

Great tip. These body work videos are great. I am looking forward to more videos on painting. How to lay down the smoothest finish, masking techniques for two tone and stripes, etc.

[@SYLVESTERSCUSTOMS]

Thank you

[@eddieschumock5997]

Nice trick with the tape measure. Thanks for sharing.

[@SYLVESTERSCUSTOMS]

Thank you!

[@Moparmaga-1]

Great video, this will help me greatly on my dart drag car. It's going to be a 70 pro stock tribute car.

[@SYLVESTERSCUSTOMS]

Good luck!

[@countrysmurfcomedy3099]

Great Info.....💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾 Weekend Warrior

[@SYLVESTERSCUSTOMS]

Thank you

[@curtsgarage4009]

Top notch work again Travis!!

[@SYLVESTERSCUSTOMS]

Thank you!

[@johnnyjackson9641]

Thanks my man!

[@SYLVESTERSCUSTOMS]

You bet!

[@YootubeUK]

De Tomaso, nice! That was helpful in the later tip about protecting your existing good straight edge. It's a tricky thing and time consuming getting it right. Get it wrong and spot it after paint is more than a bit disheartening.

[@SYLVESTERSCUSTOMS]

Thank you!

[@pitcuz]

Awesome video, thanks for sharing. I will be destroying a tape measure this weekend.

[@SYLVESTERSCUSTOMS]

🤣🤣🤣🤣

[@SYLVESTERSCUSTOMS]

Thank you!

[@salg7998]

Great job in explaining!

[@SYLVESTERSCUSTOMS]

Thanks!

[@freddyleftyou8133]

sweet video! Doing this on a ford 8n hood. Razor sharp!

[@SYLVESTERSCUSTOMS]

Sounds great!

[@jimgates5422]

Thanks for this tip, Travis! I have literally spent the last two summers chasing a body line on a, yup you guessed it, a Dodge Dart. I tried everything I could think of, tape, chalk line and metal straight edges. Finally got it where I am happy with it, this would have been a great help two years ago!! 🤣 Love the channel, keep it up!

[@SYLVESTERSCUSTOMS]

Thank you!!

[@ClintsStreetMachines]

Love that technique. Thanks for sharing!

[@SYLVESTERSCUSTOMS]

Thank you

[@landonsheffield6160]

I used the tape measure method and it worked very good! I was struggling with the body line crease that runs through the center of 1970 Dodge Super Bee quarter panels. I really appreciate the videos you guys put out, I have learned a ton from them and they have helped me a ton on my restoration. Do you have a patreon? I would love to pay forward a little to you guys for the all of the help you have provided. Would also love to take classes someday. Thanks!

[@SYLVESTERSCUSTOMS]

That's great we’re happy it’s helping you!! I don’t unfortunately. I need to

[@landonsheffield6160]

@@SYLVESTERSCUSTOMS You should get it set up. You deserve it! It's nice to see such quality content on youtube. High end restoration interests me, not the typical junk work you see on youtube.

[@troyadams1076]

Great lesson

[@SYLVESTERSCUSTOMS]

Thank you

[@theinsaneshecklador6598]

The tape measure is a great idea. Thanks! Do you have any tips for rounding over the edge of the body line and keeping it consistent on cars that are not razor sharp but also not a big radius?

[@SYLVESTERSCUSTOMS]

Make it sharp and perfect then when you are wet sanding walk the entire car sanding the body line from one end to the other consistency is key.

[@darryleconrad2248]

Good job on wearing the mask when sanding the filler, I see a lot of guy's not wearing a mask GOOD JOB.

[@SYLVESTERSCUSTOMS]

At times it’s hard to teach and film but when we aren’t filming we do

[@7DeuceCutty212]

So cool!!! Excellent idea💪🏽😎

[@SYLVESTERSCUSTOMS]

Thank you!

[@miguelquiroz1550]

Perfect! Thanks

[@SYLVESTERSCUSTOMS]

You're welcome!

[@cesaralcantar2843]

Good trick bro very helpful thanks

[@SYLVESTERSCUSTOMS]

Thank you!

[@casey1653]

Great trick, keep up the great videos!

[@SYLVESTERSCUSTOMS]

Thank you !

[@casey1653]

I'm going to share this with the team of craftsman that I'm working with.

[@MH-on8ol]

Very different. I normally put a extra high build coat on the style line area and then use tape to establish a line and block to the edge of the tape to get the line straight.

[@angelonikitaras2977]

great video once again, ive used masking tape always and i like this method you have shone us, i have a VE valiant in the shop its a Australian 4 dr sedan equivalent to to a dodge dart with the the same lines its not going to be a show car but i always want the lines as straight as possible and i will give this ago cheers again

[@SYLVESTERSCUSTOMS]

Awesome thank you!

[@kalel2819]

I see in your videos you use body filler to hold doors and decklids in position for filler work and primer to get the sides perfectly straight. At what point do you remove it, and how do you remove it without affecting the perfect sides and gaps?

[@SYLVESTERSCUSTOMS]

We remove them after wet sanding with 600. I carefully cut in the center with a thin air saw and sand it on each side until it’s perfect.

[@straightlineautobody]

this !!! is brilliant!!!! A FUKN TAPE MEASURE UPSIDE DOWN❤😮

[@SYLVESTERSCUSTOMS]

Thank you

[@davidharrison8397]

Great video.....nice job

[@SYLVESTERSCUSTOMS]

Thank you!

[@mysteriousstranger239]

great tip thx

[@SYLVESTERSCUSTOMS]

👍🏻👍🏻👍🏻

[@damxgopak457]

Great info thanks.

[@SYLVESTERSCUSTOMS]

👌🏻👊🏻👍🏻

[@JDMSMOKEY03]

I can tell ur ocd like myself. Haha. Or I guess we just like to do everything the best/right way. I just found your channel and what’s funny is that I was telling my buddy about one of your videos and he was like I just watched that video also! We both just came across your channel around the same time! Electronics these days 🤦‍♂️

[@SYLVESTERSCUSTOMS]

That’s awesome!!!

[@areidenbaugh]

Hey Travis!! Thanks for all the terrific information clearly presented in your videos. I'm completely redoing a low number rust free Datsun 240Z and currently getting the car to bare metal so I can assess the sheet metal repair needed from several minor accidents. I'm wanting to order sanding blocks as I will need them soon. You have recommended several and indicated that your shop has them all. Is there a set you would suggest that I start with or should I grab individual blocks from different makers in different sizes. I'm not afraid to spend the money for good tools. Also wondering as my car is covered but outside in SoCal and this will probably take a while if I should prime sheet metal and then strip again as needed to minimize surface rust. You also mentioned Gibbs in one of your videos as a possible protectant? Thanks in advance. I might also be interested in doing one of your workshop classes. Best, Andy

[@SYLVESTERSCUSTOMS]

Thank you very much. I prefer next level blocks as my go to if you message Jason and tell him you saw it on our channel. He even gives you a little discount. He’s just a small mom and Pop shop out of Canada. Great guy and if you are interested in some classes, feel free to email me. We have the dates on our website Sylvesterscustoms.com. 👌🏻

[@mreightytwenty8709]

Very good mate from Kiwi

[@SYLVESTERSCUSTOMS]

Thank you

[@cosprint]

Glad you made this video. Not soon enough, Lol, I will be working on the body line on the Trans am. Hope you will make a video of how to round off the body line. I think I have the idea, but no one out there in Y.T. land has done a video on that. If you dont, oh well. Cant ask to much after the time you spent making these videos.

[@darrellfield94]

Great videos! I like your common sense approach to tasks that seemed overwhelming! Any chance you could provide some tips or perhaps a video on how to get your door edges perfect? I'm working on a 1955 Chevy 210 Post and the doors required some steel rod & welding to get the gaps dialled in, now I'm struggling with getting the door edges to perfectly match the fenders and quarter panel i.e. how to sand the body filler to get those edges to match up perfect? Thanks

[@SYLVESTERSCUSTOMS]

We already have videos on this. Go back a couple videos to our two part gap videos.

[@darrellfield94]

@@SYLVESTERSCUSTOMS Thanks!

[@robertthrem3382]

I would say if the numbers are facing you, it would be straight if the numbers are away from you, it could angle

[@mikeallen3646]

great idea!

[@SYLVESTERSCUSTOMS]

Thank you!

[@rolangracia8047]

Brutal ,el mejor tremendo maestro

[@SYLVESTERSCUSTOMS]

Gracias por ver agradezco el apoyo

[@axemanco.billspirk6862]

Awesome videos. Keep it up ❤

[@SYLVESTERSCUSTOMS]

Thank you!!

[@robertthrem3382]

If memory serves me correctly, it’s not easy you have shims in the front fenders. You have adjustable hinges on the doors adjustable latches. Omg I’m a union operating engineer the type of laser you’re talking about is different than mine. I could set it up 10 foot away after you do your tape measure. I would make the car perfectly level to my laser and then I can give you within 1/32 of an inch for the front of the fender❤

[@SYLVESTERSCUSTOMS]

There ya go!

[@kboruss000]

Great video. Did this tape trick after straight body filled panels for one side of on my 67 Camaro panels and turned out straight, however if u still want a bit of rolled edge what might be a trick to still keep it straight but not such a fine line? Don’t want to lose the straight edge when trying to get more of stock rolled edge.

[@SYLVESTERSCUSTOMS]

You just gotta make it sharp then sand it round evenly

[@kboruss000]

@@SYLVESTERSCUSTOMS Thanks. oh it’s sharp with this trick just want to make sure it’s even when trying to round out the edge a bit.

[@SYLVESTERSCUSTOMS]

@@kboruss000 I typically walk the length of the car and I count how many passes

[@darrellsomers5427]

And great for stripes

[@SYLVESTERSCUSTOMS]

Good call 👍🏻

[@ajd5363]

First time trying this. Most of the body line is good, I just have one small section that took a little detour so I’m going to try this to just fix that section. Sometime the line can be a little too crisp compared to the rest of the car.

[@SYLVESTERSCUSTOMS]

Yes it’s all personal preference I like to make them crisp and then around them off evenly for the rest of the whole car

[@ajd5363]

@@SYLVESTERSCUSTOMS Well, my first attempt didn’t turn out so good. Damn

[@ajd5363]

I really wish you would showed the complete process with the other side of the body line. I’m still struggling to pull this off.

[@SYLVESTERSCUSTOMS]

Sorry, it definitely takes practice. You need the Body Work as close to perfect as possible and usually the reason that you fight this is because you’re standing too much off. If the Body Work is near perfect, this should go relatively quickly.

[@JeffLeblanc-xb7qe]

I got that problem I’m doing a 71 dart and Thers one body line were the side molding was it’s easy to see on fender and doors but at the back of car it’s hard to see I think it’s from the factory molding that’s on side of car and I’m not putting the molding back on the car so will have to fill holes

[@JeffLeblanc-xb7qe]

Is ther a video of the dart ?

[@976charlie9]

Having an issue with a 1969 F250, the bed has a soft “concave” style line. There is no landmark to use as a starting point. Help appreciated.

[@SYLVESTERSCUSTOMS]

Hard to tell without a picture. Send a pic through instagram

[@paulcoote3094]

How do u ensure the line is the same thickness all the way along? The actual line might end up hilly?

[@SYLVESTERSCUSTOMS]

The bodywork needs to be 95% straight before this step so it’s a perfect point between two planes. As for straight you can pull a string tight to check or use a construction laser etc

[@martinvb26]

I got nice Straight body lines but to sharp for a firebird. What is the best way to soften the body lines?🙏

[@SYLVESTERSCUSTOMS]

Get everything crisp and then sand them round evenly and same number of swipes/pressure etc walking the length of body line to ensure consistency

[@976charlie9]

Why not leave the tape on while your blocking? Great videos really enjoy them.

[@SYLVESTERSCUSTOMS]

Thank you. If the filler dries on tape it’s harder to get off. You can re-tape if you feel more comfortable but I don’t.

[@dhakagee5297]

Please excuse my ignorance but, is this the modern way to do body work? I do have 2 questions if you can answer, question #1-If I understand correctly, you are using a very thin body filler on the entire car to clean up high/low spots and ripples? Question # 2- Is it possible to do body work on a 66 fastback mustang that has some spots that were bondo, to rework the entire car so that there's no bondo? (I'm guessing that it's possible to spot weld metal pieces then grind, then body filler). Thank you for your time and informative video.

[@SYLVESTERSCUSTOMS]

Even if a car is metal finished they typically still need a thin skim coat to make a show car quality finish. As for your question regarding welding etc watch our video called bodywork without body filler there’s 3 episodes that will answer all your questions 👍🏻

[@tobygathergood4990]

I really hate using filler on a build, or even a repair, so what about getting the body line straight in metal with zero filler?

[@SYLVESTERSCUSTOMS]

The amount of filler isn’t much. In this case we’re making the body line sharper than factory. You can get the metal work killer but even the best in the industry 99% of the time skim coat the entire car to get it flat as possible with zero deflection or ripples across an entire build.

[@tobygathergood4990]

@@SYLVESTERSCUSTOMS Yes, I the skim coating and I hate it.

[@darrellsomers5427]

A building lazzer will give you a strat line ,to run your tape on they work vertical and horizonal ,I don't know why more people don't use them 85-100 bucks they work great

[@SYLVESTERSCUSTOMS]

I have one but almost no cars have straight lines all the way at the ends. Hence why we use this method It is stated in the video

[@kirklockwood6264]

Toward the end I would've taped back off the top with fresh masking tape so that when your sanding your line up from bottom you're protecting from that stray block into the top that should be straight and even spaced pressure on the block which is crucial to getting it straight to the top as if top "IS" straight you're sanding the bottom flat and straight to it. Adding more filler to the top is going to give you another wave into the straight smooth top section. Should be straight to start even if slightly below the line you will fill and sand up to it to finish. Might be able to cover difference with primer, but why work twice as long? Sand upwards into top straight section, up to that tape or, tape your metal tape measure tape to the straight top and with the finest last pass sand up lightly to that edge thus never sanding into the top. You can put slight tabs of masking tape ahead or behind where you're blocking just to hold the bottom edge down and move accordingly preserving the line. Also with tape pull it off not out straight which will cause lifting but pull away from work at a 45° angle so in this case up and backwards at 45° and it will be less invasive, won't pull off anything into your work area or cause voids if fill is still elastic enough it will not break out the edge but allow it to give the width of two folds of the masking tape. Once harder that excess can be removed easily as what was once on the tape is still basically seperated from the top (where tape was) and once you sand up to the line closer on top that little bit will just fall off which would be a great time to retape the top or use the metal measuring piece. Just a different approach.

[@SYLVESTERSCUSTOMS]

Got it. … maybe you should just start a channel then since this one is sub par. Everyone has their different ways of doing this and that’s your opinion if your body work is as good as it should be this is a very simple task. I’m trying to make it easy for people to understand.

[@kirklockwood6264]

@@SYLVESTERSCUSTOMS You are I'm just adding my opinion why you so mad? Never said sub par but you can always learn more unless you know all! I do see it all the time when those think they can't possibly improve...SAD. I thought better of you and thought your viedeos were great as well as your calm attitude, Wow I hit a nerve!! Sorry won't ever give my 40 years of experiance here again. Oh, and stick with Linear Blocking tools! 😊

[@kirklockwood6264]

Great Idea with Tape measure tape! Look at where you're starting #1. You are NOT including the radius of the rear fender bulge in the front If to try you know what the tape measure would do! Tape is no different. Like your metal tape I would tape to that line point, hold thumbnail there and work the extra length into the radius line of the fender bulge which is a short area to manage. Plus if you cut the masking tape with scissors you won't get that stretching of the tape from ripping it off the roll which does distort your tape for sure! I love the metal tape measure trick but I also incorporate the front wing and rear quarter into that line if it goes the length of the whole car which you can only do with tape and a carefully placed fingernail at start and end points before the cars fender bulges present themselves. When bringing the whole car "Together" sanding I work from Top to bottom. I will work the top down totally straight with the whole car as a whole, then raise the car if not already to sand from bottum up-to near that body line and since the top is totally "DONE FLAT" to the whole car you then tape whole side line to the top, then finish sand bottom up to it without distorting your PURRRFECTLY flat topside where ALL eyes are on! I would use your metal tape in the lengthy center of the car and the masking tape I'd leave on front and back to continue that line and carefully maneuver the ends round the radius of the wheel wells to button up the whole of the car. Love the measuring tape thing!! Very cool idea! Most care I work on don't have body lines but I did a few Mustangs in my time, LOL! Enough said. Fantastic video's Mr. Love the Linear Blocks but also respect your individuality to use what needs to be for the situation at hand. with skill any bodyman will gain much needed knowledge in how to not ruin his work with different items or blocks and unfortunately that all comes with a few mistakes through the years. It is a great thing seeing someone as you and a few others trying to help others and not hurt. I've seen as an instructor it is very hard to unteach bad habits that some are ingrained with! Everything changes when we stay open for suggestions as a smart man will always disect them and see if it's relevant with their knowledge and experience and this is what helps develop new tools or new ways of going about things more simply but much more effectively! God bless you for helping all out there smart enough to have searched the web and found your wonderful lessons. Thank you for teaching this old dog a great new trick, I appreciate the education! Those who know it all NEVER GROW! Always learn from others and you'll always learn what you didn't know and be better for it. As will be your work. Never stop Learning it is how the trade evolves, Best advice I can ever give to anyone.

[@SYLVESTERSCUSTOMS]

thanks I think …. There’s a million ways to slice a body line. Im not trying to confuse people. Can I please everyone? No. If you have a better way then start a channel. Writing two essays on here like this will only confuse someone new to this trade.

[@grant6985]

Not to be "that" guy, but you spelled straight wrong. Haha. Great video though dude!

[@SYLVESTERSCUSTOMS]

Fixed, appreciate that. Glad you liked the video.

[@chrishall8142]

Use thinner tape 3/4 is best Less memory and easier to use

[@SYLVESTERSCUSTOMS]

It is easier but sometimes it doesn’t make four of the straightest lines cool thing is once you have sprayed the black with the tape measure it really doesn’t matter what tape you use.

[@warrenrutledge8393]

Why didn't you use a airfile been doing body work for 53years

[@SYLVESTERSCUSTOMS]

Because an airfile will not get you a laser straight paint job. We need to do a video soon on the differences between using an air pile and using hand blocks. There is a substantial difference when you’re dealing with Showcar quality.

[@bigblocklawyer]

Doing restorations for 40 years, and perfecting countless body lines, having a cheat is helpful, but at the end of the day, you have to rely on skills to see the shape. If they could put it in a bottle, anyone could do it.

[@SYLVESTERSCUSTOMS]

Agreed!

[@TheBigRed.]

Use pinstripe tape! 👍

[@SYLVESTERSCUSTOMS]

👍🏻

[@cosprint]

Glad you made this video. Not soon enough, Lol, I will be working on the body line on the Trans am. Hope you will make a video of how to round off the body line. I think I have the idea, but no one out there in Y.T. land has done a video on that. If you dont, oh well. Cant ask to much after the time you spent making these videos.

[@theinsaneshecklador6598]

I just asked the same question. Hopefully Travis will share his knowledge.

[@SYLVESTERSCUSTOMS]

Don’t take the car apart until you are wet sanded and ready for paint. When you are wet sanding walk the length of the body line using a soft block and knock down the sharp line evenly and consistently for every line over the whole car. You can also do this in the bodywork stage. I typically do it last.

[@cosprint]

@@SYLVESTERSCUSTOMS thank you for the reply and the video.

[@rickd6421]

Great tip for getting straight lines! I'm glad i kept my broken retractable tape measure :) . Great video. Thanks for sharing. Look forward to your next lesson :)

[@SYLVESTERSCUSTOMS]

Thank you!

[@vehdynam]

Very valuable information and much appreciated.This channel is a must for those doing their own projects at home. Many thanks.

[@SYLVESTERSCUSTOMS]

Call thank you very much. We’re glad you are enjoying them.

[@shamchannel3919]

very well explained video. however, you did not finish the top of the line. I would have liked to see how it was it was completely finished, best of all, how the finished product looked. You see I am a D.I.Y PERSON and I learn a lot from videos. Thank you a lot for your presentation. Apart from my above comments Your presentation was very good and helpful.

[@SYLVESTERSCUSTOMS]

Thank you it’s just the exact same process repeated above. We only have so much time in the day we did the best we could.

[@davidpetrus1748]

that is a good idea to try i recently did a 70 dart with tape and mirka powder came out nice next project ill try your tape measure idea i also like your style of working i also use rage ultra and the xtra you need time to spread the other thing we do alike is use a lift for bodywork you can only work so many years with your ass on a milk crate you see top notch bodyman making videos on the ground still thats crazy the only thing i would warn you about is letting the car go to the ground just to double check the lines cause some cars like to flex while picking them up

[@SYLVESTERSCUSTOMS]

We don’t actually do the bodywork on the lift we only finalize body lines, but yes, I totally agree with you. We actually came up with this tape measure idea on a 69 dodge dart those things have way too many body lines. 🤣

[@genekostron7998]

Probably the very best video I seen yet on sharpening up body lines, thank you

[@SYLVESTERSCUSTOMS]

Thank you

[@joshandrei5250]

351 dimebag 😜

[@SYLVESTERSCUSTOMS]

🤔

[@joshandrei5250]

@@SYLVESTERSCUSTOMS dimebag was the guitarist of Pantera, these came out with a 351 if I'm not mistaken. Great tips by the way.