Check out my other video that explains in detail on using a thread pitch gauge. kzbin.info/www/bejne/goC1oYyaf9abfM0
@awanitkumar39617 жыл бұрын
Ty brother
@harsham20046 жыл бұрын
SAIT Millwright
@gloriouschannel36833 жыл бұрын
I get the M and 8 etc but i don't get the other things. For example. M8 x 10. What's the 10? The lengt of the bolt/treath?
@afghosting87725 жыл бұрын
Thank you. This helps. I just am astonished at how seemingly overcomplicated this is.
@GoTo-KleckfilesDOTCOM Жыл бұрын
I have all these bolts and I'm like how the heck do I measure him and I've looked and looked and all these people give all these explanations and I'm like I don't know what the heck they're talking about and you have the most comprehensive one thank you sir
@khontsuen10 ай бұрын
Saya juga..kepala 6, garis 3 no 8....bla..bla.. .bla. Kenapa tidak langsung saja, baut ini bersaiz sekian 12, kepala bernombor 4.. Nilai torsi baut ini harusnya ialah sekian..🤢
@cheapcigs97722 жыл бұрын
Bro....I don't even know you and you're a better dad than my dad, lol🤝🏻👍
@timwright77382 жыл бұрын
didn't know about thread pitch gauges or tap drill charts... so thanks!
@gjarucki3 жыл бұрын
This is ridiculous. Who the f came up with such a complicated method. Good video tho...
@jessenurse91944 жыл бұрын
Hi, I found this to be the best tutorial on this subject, but on measuring the nut you lost me because I’m not so good with math and this is imperial, but I’m metric so I don’t understand. HELP Me please
@BryanMax7 жыл бұрын
Great info, thanks for posting
@johanherrera81172 жыл бұрын
Very nice video congratulations 🎊 I have a question, there's a direct relationship between the size of hexagon head an the size of bolts body, can you give me a light on that please, I will appreciate that. Bless.
@rickkstir9 ай бұрын
How did you know to go from metric (20mm) to imperial (3/4") on the first 2 bolts?
@doreenwatson-read2 жыл бұрын
very helpful thankyou
@2002Term Жыл бұрын
You sounds like Ed Bolian from vinwiki
@yurroad25917 жыл бұрын
how to know the correct spanner for a bolt?
@harryhite28942 жыл бұрын
How do you did bolt length from measuring the diameter of the bolt length of body with caliper??
@shantutalikoti12127 жыл бұрын
Super message
@thepixinator25923 жыл бұрын
At 1:52 how do you tell which bolt is metric just by looking at it?
@ralph54502 жыл бұрын
You can't. You have to look at the head. 3:22 Metric has numbers and standard has lines. He of course already knew.
@zeus2456 жыл бұрын
I have a m12x1.5 lug nuts, can i use a 9/16"-18? Or what is the nearest equivalent?
@saitmillwright8046 жыл бұрын
I would use the same as the original only.
@gvsaisasank97877 жыл бұрын
The inside diameter of the nut is 0.655 inch approx. and the outside diameter of the nut is 0.75 inch. How can they both fit together.?
@Mainer19456 жыл бұрын
It is because you need to measure the bolt on the ouside diameter of the threads, and you need to measure the same for the nut, but that is more difficult. The 0.655 is the inside diameter of the theards on the nut...as you said.
@sahilmansoori35112 жыл бұрын
Can we use this method to make its model in Solidworks
@nafisahmad49683 жыл бұрын
In a bolt/ screw packages I found 's25' written Also 'k ' written What do they mean?
@kojomensah74743 жыл бұрын
Is the m20 written on top of the bolt pls??
@GabrielKozsar7 жыл бұрын
Where can I find the chart in the video ?
@saitmillwright8047 жыл бұрын
The chart in the video is one we provide our students here at SAIT. It is just a tap drill chart and they can be found all over. I would just search one up on google.
@Ashishkumar-ty3ug6 жыл бұрын
How to know the size of bolt as per thickness?
@saitmillwright8046 жыл бұрын
A tape measure or ruler would work well. You could also use a caliper. Just measure across the threads.
@Mainer19456 жыл бұрын
Best to use a outside micrometer.
@RacistRandy8 жыл бұрын
Yo this was dope AF keep up the work. Word.
@saitmillwright8047 жыл бұрын
Thanks eh.
@zachharper2163 жыл бұрын
was this the caliper you used: Mitutoyo 530-119 Vernier Caliper, Stainless Steel, Inch/Metric, 0-12" Range, +/-0.0015" Accuracy, 0.001" Resolution... Could you recommend one?
@conqwiztadore22135 жыл бұрын
Uhghhh can i just use a tape measure?
@TiberiusStorm8 жыл бұрын
What about bolt head size?
@saitmillwright8048 жыл бұрын
That can be found by measuring across one flat side of the head to the other.
@OxygenGenesis Жыл бұрын
4:54 where the nut gets measured
@tiltilton2 жыл бұрын
Insanely over- complicated. Thanks for explaining.
@tiltilton2 жыл бұрын
Isn’t it about time the US standardised to the metric system? As we’ve done here in the UK despite the resistance to change, mostly from older people.
@francoamerican4632 Жыл бұрын
The US was supposed to switch over to using the metric system in the 1970's. Fast forward almost 50 years and we're still using the same crazy, illogical system that everyone else stopped using decades ago. 🤔
@cyjothomas41213 жыл бұрын
doesnt mention how to messure the length of bolt
@saitmillwright8043 жыл бұрын
If it's a hex head bolt, measure from the bottom of the head to the end. If it's a fastener with a "V" shaped head for counter sunk holes, measure the entire length of the bolt.
@olaleyeomoyajowo75855 жыл бұрын
Where do i download the tap chart
@saitmillwright8045 жыл бұрын
I would search it on google. Search for tap drill chart. They are very commonly supplied by bolt supply companies as well if you would like a hard copy.
@timthomas1297 жыл бұрын
peep the fps
@FamilyMan15202 жыл бұрын
OMG this guy’s voice puts me to sleep. He sounds and talks like the dry eyes guy in those commercials.
@amrh42597 жыл бұрын
3:38 sorry ,i can't heard what you say 8.8 mean what ?
@saitmillwright8047 жыл бұрын
It is the Grade of the fastener.
@littlefrank907 ай бұрын
OH GOD FUCK IMPERIAL
@craigbanks95325 жыл бұрын
That's not the way to use a micrometer @ 0:43
@sonnybarker48155 жыл бұрын
umz... It's a caliper
@craigbanks95325 жыл бұрын
@@sonnybarker4815 Hahahah. Stick to what you know. whatever that is
@sonnybarker48155 жыл бұрын
Dude..google it..it's a caliper..damn..there are inside and outside mircrometers..change what you think you know. GOOGLE !
@yurroad25917 жыл бұрын
how to know the correct spanner for a bolt?
@saitmillwright8047 жыл бұрын
Just measure across the flats of the head of the bolt.