BOOM!!! 55,000rpm VS Model Engine - Catastrophic Failure - LOL

🎓Be an eBay PRO - kevin-talbot.t...
💡Check out my Business Channel: / @kevtalbot5356
**My instagram / talbotkev
--My Facebook page see videos earlier! / kevintalbotvideos
🚗Kev's RC Basher School - kevin-talbot.t...
Videos Uploaded most days, Subscribe so you don't miss them :)
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, destruction and a bit of business stuff :) Although a lot of my videos are RC Car videos you will also see other stuff like business, Amazon FBA, eBay, Monster truck, Cars, finance, insurance and many other topics.
#kevintalbot #rccars #rc

[@explorerc6707]

Yeah let's get you out to 1 million subscribers

[@Kasilue]

Hey Guys, what about a new Challenge : Build ( Seriously !! ) a full metal Engine Model. Attach some Cooling and Grease it very very well. Finally, FEED IT TO THE RIPPER =D

[@bishoplarry5094]

I know Im pretty randomly asking but does anyone know a good place to watch new tv shows online ?

[@explorerc6707]

Are you in the uk

[@jaxonheath3038]

@Bishop Larry Lately I have been using flixzone. You can find it by googling =)

[@heagoesnothing2829]

Try it with a metal model engine

[@connerworkshop5673]

You know there is a model engine you haven’t done yet. It’s the revel visible v8 that engine is though so yeah definitely recommend trying it

[@darrylnicholson1640]

Never seen a cordless drill doing 55000 rpm.

[@knoxe1]

Hammer drills do

[@fargonianproductions2767]

knoxe1 wait, really?

[@Ben-wf8rl]

Fargonian Productions no, they get to around 4000rpm max, the fastest drill is a dental drill which can get to 800000rpm

[@briangriffin2107]

You need to make a model engine run off petrol

[@NordicRC]

Still entertaining to watch with you two guys ☺️

[@jantheman2001]

You seemed disappointed, I loved it smiling and laughing all the way through thanks for 10 mins of fun.

[@KevinTalbotTV]

Yeh I was a bit disappointed, we were hoping for a better show than the last one! We still had fun though!

[@tannerborden]

What you're looking for is 7:05

[@robbrcnstuff4220]

It's awesome when it's in slow motion and still moving at high speed, great show. You could put a spur gear on the jet and have a pinion on the motor and have the motor on a hinge and pull it off the spur when it gets up to speed

[@stage3muppet]

Bet pats a winner with the lady’s 😂😂😂

[@tronmandurglur7721]

love your channel kev always a good laugh always doing something funny and pat and rest really add to the entertainment all the funny stuff you all say and do i love watching your videos keep up the great work man laughed so hard when pat say he didnt want you to put that in had such a funny look on his face with his fingers in the hole lmfao

[@nathanz602]

3 views, 44 comments, 86 likes KZbin LOGIC

[@tannerbeaudette-renaud1355]

KZbin drunk

[@dansrc997]

U are easily the best Rc youtuber out there😊

[@KevinTalbotTV]

Thanks dude :)

[@NBproductionspresent]

next time you guys should grease everything in motion so it lasts longer

[@tronixfix]

Try the same with an old small 4 stroke engine... just remove the sparkplugs.

[@eddielane9569]

It lasted longer than I expected.

[@Noobplayerplgames]

7:34 if you used engine oil it wouldn't have happened because there would be lubrication

[@payne1003]

I'm wondering what would of happened if you could of kept the engine lubricated on how much it would take, because that little engine took a lot. Amazing.

[@_TENORIO]

*7:05** rip headphones*

[@dustincurtis8229]

Thumbs up for the 1 in the stink. Thanks for that pat.

[@131unicorn]

I love this series so much !!!!!!!

[@ThuanDuong-pv3xu]

7:11 the resonance of table (strong shaking) is a cause . If you want to experiment you should do them separately

[@CallMeAdam2023]

This was an EPIC video! I appreciate the work you put into things for the videos. You made this motor "too good" and it did not blow apart. Thats ok , the jet engines are always WAY more fun and dangerous

[@NiklasAdv]

1:32 That sums up this channel pretty good!

[@mysterygamer48]

Either I've never noticed or there's a lot of sex jokes in this episode XD

[@RCunexttuesday]

Lmao that look of contentment on pats face at 3:29 🤣

[@owenbarker350]

Maybe you can convince Lockheed Martin to build their engines out of plastic now!

[@danielcline7413]

Love your no mercy testing on the cars

[@not5tock5.0]

2:09 two in the pink one in the stink😬😂

[@not5tock5.0]

Richard "Pat" Fegan oh my god😂😂 guess I didn’t think about that lol

[@not5tock5.0]

Richard "Pat" Fegan but that can be a good thing sometimes😂😂

[@pedrowoolson4273]

"We built it too good" - Hopefully that carries over to your monster truck... I'd kinda like to know what all the bits flying out in the first run were... lube? melted plastic? Not that bad... unexpected results are always entertaining and you guys building something too well... unexpected to say the least

[@KevinTalbotTV]

it was lube and melted plastic

[@BLKBRDSR71]

What's your obsession with the Moon? In every video your like "to the moon"! Anyways, I love your videos.

[@rossfurman7449]

Pat looks knacked or stoned😂😂😂

[@possiblepsychopath6459]

I made up a fun idea maybe you should build a Lego engine without using parts from the smaller ones and actually make all parts from separate parts and try to make it survive 50000 rpm for at least 30 seconds, there's other KZbinrs that make lego engines so you can figure out how to make the parts

[@redneckgames9357]

I like how Pat's mask is really dirty lol

[@harryharris5629]

Thanks Kev for another destruction video. I am building an xmaxx out of broken parts from my good xmaxx. Have a good night

[@talanpeterson6882]

you should put oil in it, put an o-ring on the cylinder (for compression) add fuel and spark, and hope you dont burn the shop down when it explodes

[@psaucy1254]

7:36 that hot glue went to the moon

[@williamquick6153]

I couldn't stop laughing guys. I think these videos are awesome from you guys. Just having fun and monkeying around. Its hilarious 👍👍

[@somefuckingprick]

2min 8s was quite a "shocker" Lol

[@Basherqueen]

Oh Boys.... nice build :-)

[@marytorres8822]

Do it whit a nitro engine . Always 👍

[@tannerbeaudette-renaud1355]

Good idea that would be awesome

[@paul-erikhelliste4390]

I hope you get this year 1million subs

[@KevinTalbotTV]

haha same, thanks :)

[@bikingintheforestisawesome487]

I got to the hobby because i saw your videos. Then i bought a Mini e revo. And i will say thanks to you becuase this a so cool hobby. And of course your video is so cool again!!

[@charleswillis5454]

He Says he's going to build it properly but then almost breaks it when he opened it lol

[@steelerfreek007]

I have a HPI BLITZ fully opted out , it was me late pops rig. Thinking about doing something insane with it. Any ideas ?

[@rcr0ck]

It's good to see you guys do these tests so I don't have to waste my coin👍

[@Certified_bass_head.]

Can you put the ripper motor in the Amra cration

[@RobertMcInally]

Just found your vids, love them, Keep up the good work :)

[@rcfundyer5739]

That looks like good fun to me great video guys

[@aaroncook9912]

Awesome Kev!

[@mehrnoushkolahdoov198]

55,000 RPM is good impossible man it’s fake guys! Leave a like below!👍👍

[@princetugade9344]

4:23 A TOY TURBINE TURNS INTO A REAL AIRPLANE ENGINE AND EXPLODES

[@MrGibbie2210]

you pair are mad ..... love it

[@ahmedfpv9038]

Hi kev👍 do that with nitro engine

[@Omegadoomship]

Drills do not spin at 50,000 rpm. Not even close. They usually spin at 300 and 800 rpm. The little motor inside the drill does spin very fast but it is ran though a gear reduction so it makes more torque at less rpm. Even a Dremel tool only spin at a max of 37,000 rpm.

[@gumbilitous2804]

They didn't use the drill

[@guy7500]

Your vids are super duper cool that I bought a rustler 4x4 vxl

[@DaneH64]

Copier

[@guy7500]

How?

[@davidpotter8890]

Wow that baby was a humming Lol took it really well this time great video always fun!

[@tobybusbridge3422]

Awesome video Kev keep up the good work

[@kylemarkham4848]

Awesome as usual

[@Zodliness]

YEH! A second jet engine video!

[@cjhobbies2536]

Try using a cup off a rc nitro plane starter motor and mount to the ripper that way you can pull it away once up to speed.

[@jamesperrine1984]

I don't know what you guys are talking about, I thought it was a great video. That little plastic engine spun up fast and held it till the crank broke off. I thought that was really cool. You got to try and run one of fuel

[@KevinTalbotTV]

We were expecting a better fail like the last one, still had fun tho!

[@malactsunami02]

Hey cheguei haha daí Kevin vídeo de carrinho barato tunados kkkk

[@devonbrown2936]

Yes it was hilarious especially his face

[@RC-gn7pm]

Great vid loved it 👍👍👍👍👍😆😆😆😆👍

[@w_callaghan8300]

at 0:39 it looks just like engine movement in old cartoons

[@Andy-ff4jd]

It was very funny😂😂😂😂 Nice job😬

[@theskullusxr8854]

I like watchig stuff like this

[@LiamPlester]

Put the ripper motor in the xmaxx

[@theirishaxe9405]

Lol I caught myself flinching before it exploded

[@fabianrudzewski9027]

Funny how all these videos claiming funny rpm numbers into something emerge. Yet no one has measured how fast they really got their "something". Just because you hook something to a motor that is theoretically able to reach 55k no load speed, doesn't mean you get anywhere near that in the experiment. Nevertheless, destruction is always entertaining to watch

[@indica8510]

I was always under the impression Pat was constantly self lubricating.

[@rickburnout666]

Plastic engines ain't balanced so won't last no matter what you do

[@lewiscurnutte1272]

Hey Kev you guys get the rpms up higher and higher keep it up

[@rotatingcat1957]

6:29 my old pc (3rd) be like when it launches minecraft 1.17:

[@alanclark9286]

Kev you got to stop lighting plastic on fire

[@tomcumberland6360]

You guys are brilliant 🤘🤘🤘

[@ksicross5104]

You should do the aluminum wall engines

[@woohoofromtexasharris4814]

If you had a way of keeping oil in it, it would last longer.

[@droppinghertz9922]

A lil fyi Pat Here in the States we call that the Shocker well keep it pg13 so ur gonna have to look that up lol...cheers

[@just_go_4_it873]

kev I think I have seen all your RC cars and bits on the moon XD

[@Seanboatfishing]

I’m ill ways here for you Kev to watch you videos

[@KevinTalbotTV]

get well soon dude

[@Seanboatfishing]

Kevin Talbot ???

[@nunodias3331]

Funny video, where did you get that face sheild???

[@gregsargeant9924]

Absolutely fantastic vids! Purchased so much stuff from watching your channel, always with a grin on my face. Your experiments are wicked. Keep up the wicked work boys, and love the ideas you come up with. SUBBED! 👍👍👍😎

[@vevohoeyo]

You guys always give me a good larf.. keep up the fun times

[@matta6731]

you should do this but put diesel, petrol, or nitro in the cylinder

[@GreysUniverse]

Jet engine 😂👍🏼 can’t wait

[@garrettburrows442]

Looks like if it had a lubrication system it would've been faired better

[@marcelknaack1]

tune it with barrings :D

[@coletompson8834]

Hey does anyone no what to do when my castle sidewinder 3 goes about a foot stops and has a green blinking light

[@Certified_bass_head.]

Can you put where you bought the ripper motor and a description please

[@shalinprajith235]

You definitely deserve 1million subscribers. let's sub to him for all his extreme effort on his videos😊

[@paulcherry1520]

Would the zops be ok for my 6s xmaxx? It's just been sitting around haven't had any money to get lipos for it especially traxxas puff Kings for it

[@KevinTalbotTV]

Pat ran the 6s zops in his xmax they worked perfectly

[@paulcherry1520]

@@KevinTalbotTV ok would u recommend them or the floureons

[@paulcherry1520]

@@KevinTalbotTV it would be two of the 5400 mAh 3s zops for mine if I get them

[@paulcherry1520]

@@KevinTalbotTV the 5200 mAh 3s lipos for my xmaxx two for 60 or should I go with these ones for it floureons 3s 8000 mAh for 90 for two trying to be as cheap as possible here lol I'm strapped for cash at the moment my xmaxx has been sitting all winter as I'm out of any matching lipos and the Traxxas ones always puff on me so I'm so done with Traxxas lipos

[@paulcherry1520]

Thanks for the reply much appreciated as I really need help my son has been bugging me to get lipos for it to drive it and I have been so broke lately aghhh

[@Jeroen-Engelgeer]

The first attemp wasn't bad. In slow mo.

[@naaktomite9774]

Use a fan to cool the engine because it maybe can survive

[@drewgriffie5399]

What's a good starting RC car from Traxxas?

[@nathanz602]

I bet you a donut 🍩 that Kev won’t heart this comment...

[@sareoshorts]

KEV BACK AT IT AGAIN

[@JuanMedina-vc5du]

R.I.P Motor xd :D

[@lorenzobiundo8059]

I like the engine videos where everything in the engine just ceases instaed if it just falling appart